Description: The following steps will cover connecting to a WinBook Security DVR with the CMS software.

1. Once the CMS software is installed, click Start then click All Programs.
   
   
   
   
2. Look for the CMS folder and select it, then select the CMS program within it.
   
   
   
   
3. If this is the first time opening it select English and then click Ok.
   
   
   
   
4. Sign into the login page. The default username is super and the password should be blank by default.
   
   
   
   
5. Click Ok at the prompt stating the device list is empty.
   
   
   
   
6. In the bottom right of the window, click System.
   
   
   
   
7. Then click Device Manager above that.
   
   
   
   
8. When the device manager window comes up, click on the Add Area icon.
   
   
   
   
9. Enter a name for the new area in the Zone box.
   
   
   
   
10. Then select the New Zone from the zone list.
    
    
    
    
11. Then click the Add Device icon.
    
    
    
    
12. If it does not automatically find the WinBook DVR, click the IP Search button.
    
    
    
    
13. The device will show in the window. Select it, then click OK.
    
    
    
    
14. Click Ok again to get back to the main screen.
    
    
    
    
15. In the top left corner right click the IP Address of the device then click Connect all video (Main Stream).
    
    
    
    
16. The CMS software should now display the picture currently viewed by the DVR.