Showcase Your Custom PC.
Breadcrumbs
Builds
Advanced FiltersSpecial Offers / Advertisements
Compare up to 4 items
New list of matching projects
-
Battlestation 2.0 Battlestation 2.0
Gaming, general use, collecting movies and music Gaming, general use, collecting movies and music$7,603.89 -
Mid Century Modern PC Mid Century Modern PC
This is my gaming and production rig. I built everything from the desk to the tower itself, it's aesthetically pleasing and... This is my gaming and production rig. I built everything from the desk to the tower itself, it's aesthetically pleasing and wonderfully custom with just enough future proofing.$6,137.79 -
Rainbow Road Rainbow Road
It's a jack of all trades. Gaming, schooling, basically whatever I need. I like to play FPS mostly. Right I've been... It's a jack of all trades. Gaming, schooling, basically whatever I need. I like to play FPS mostly. Right I've been playing a lot of zombie games. Left 4 Dead, Killing Floor, Zombie Army Trilogy.$5,587.80 -
My ROG EKWB Lian Li O11 Dynamic EVO XL... My ROG EKWB Lian Li O11 Dynamic EVO XL Build
I built this PC to o satisfy my modding itch I built this PC to o satisfy my modding itch$5,440.95 -
The view The view
Hey Everyone,My build was created to game and do work. It was the last piece missing from my man cave. I wanted a clean... Hey Everyone, My build was created to game and do work. It was the last piece missing from my man cave. I wanted a clean build but powerful at the same time. I set the build up with dual 1440p ultrawide 100hz viewsonic monitors and an extra long hdmi to my 75” Samsung tv that is connected to my surround system via arc to the marantz receiver. This setup allows me to game at my desk or kick back on the couch with a controller. I also got a oculus quest with oculus link to play beat saber and Half Life Alyx!! I chose a EVGA 2080ti FTW3 ultra Oc to power all the monitors and TVs. I have made so many trips to microcenter during the building process I have become a regular and familiar with most of the associates at the St David’s location, btw they all rock! The complete specs are below: CPU: Ryzen 3600x Cooler: wraith prism GPU: evga 2080ti ftw3 ultra Oc RAM: trident z neo 3600 cl 16, 32gb Storage: nvme pcie 4.0 1tb, nvme pcie 3.0 1tb, seagate hdd 3tb 7200 Case: NZXT h710i VR: oculus quest connected via oculus link Monitors: 2x Viewsonic xg350r-c 1440p ultrawide, Samsung 75” 4K 7series Sound system: marantz 6008 receiver, dual mono block amps for front towers. Polk audio ls90 speakers with ls70 surrounds$4,952.93 -
Perpetuity Perpetuity
This is a build I update every one to two years with new equipment either inside or out. Using Studio One music production... This is a build I update every one to two years with new equipment either inside or out. Using Studio One music production software as well as gaming.$4,912.84 -
The Tower X3 The Tower X3
I built it for software development, VR, gaming, video editing, and anything else. It does it all! I built it for software development, VR, gaming, video editing, and anything else. It does it all!$4,698.90 -
The Chimera #MicroCenterMadness The Chimera #MicroCenterMadness
The Chimera is a powerhouse machine designed to be both an aesthetic statement as well as fully functional for streaming... The Chimera is a powerhouse machine designed to be both an aesthetic statement as well as fully functional for streaming whatever games I want to stream. It was given the name Chimera as a suggestion from a viewer that was watching me upgrade the cooling loop on Twitch. The original name of this system was the Kraken. For me monsters and demons are part of my theme thus every one of my personal builds will be named after some sort of "dark" creature. This is currently version 2.0 of this build as I have learned and tried new things. I started out with a kit that I got from Alphacool with a Laing DDC pump and single 360x30mm radiator that I had expanded to two of as well as the Helix reservoir and the V2 DPP 755. Version 1.5 as described is what I had been running for my cooling for the last year. I decided that since I had to take everything apart for the one year cleaning event that I might as well take the opportunity to go ahead and upgrade the loop as a whole. There was a leak that occurred during my first build iteration that caused the RGB lighting in the GPU block to short out, which is something that is getting fixed at the beginning of April. I'm also taking that opportunity to drain the loop and make the loop order a little more efficient. This has been my first liquid cooling loop, and I chose this particular case to build into because of the unboxing video JayzTwoCents did on it. One of the biggest issues I had when it came to the upgrades I've done on the loop thus far was the pressure of the loop itself. In one iteration I considered I was going to have an Eisball pump/res combo but that ended up getting scratched. While I love everything about this build once I got everything working and without any leaking I realized a few things I could have, and will be doing differently as I already have the parts needed on order. First some extra 90º fittings, one of which will be getting placed on the bottom of the reservoir with a 10mm extension. From there I'm going to take the quick disconnect from the bottom radiator and move it to the pump with the black top's out port with a 90º fitting while taking another 90º fitting and putting it on the acrylic top pump with a direct downflow into the bottom radiator. I realized this should have been done solely for the purpose of being able to remove the bottom and front rads with the pumps and reservoir still attached without having to drain either one after taking a good long hard look at the loop order. Along with replacing the RGB strip in my GPU block I will be replacing the stock Red Devil backplate with one made by Alphacool and adding a 45º fitting on the end of the port that it fills the top radiator thru allowing a shorter run there as well. I'm switching the in/out ports on the back radiator and rerouting the connection between the two radiators to go around the quick disconnect on the reservoir while also adding a final quick disconnect to the front radiator allowing both radiators to be removed without having to drain the loop, if need be. The backplate replacement is only to help clean things up in the look. Other little additions are the 90º 24-pin ATX and two 8-pin 180º PCI-E power adapters and the LinkUp PCI-E Gen 4 riser cable. The first few photos are the original layout I attempted a year ago with the kit I bought from Alphacool, followed by the final layout once I got the Helix res and D5 pump. The third photo is of an iteration I had considered using the Alphacool Eisball pump/res combo that ended up not working out. All of the rest of the photos are of the build as it currently sits in my office.$4,554.92 -
-
All Rog build All Rog build
because i like the all white build so bad, this is the money heaven ! because i like the all white build so bad, this is the money heaven !$4,299.93 -
RTX 3090 Gaming Video Editing Desktop PC RTX 3090 Gaming Video Editing Desktop PC
PC i made for video editing so it had to have the best of the best to render fast. PC i made for video editing so it had to have the best of the best to render fast.$4,286.91 -
Rainbow Cloud Rainbow Cloud
I've always wanted a color themed build so I finally built one. I will bring this to college and use it for homework and... I've always wanted a color themed build so I finally built one. I will bring this to college and use it for homework and gaming on the side. With 4080, it can handle any game at any setting no problem. The 4080 is a monster. Puts my older 3070Ti to shame with any game. Obviously, I can't bring this to all my classes so I will use a laptop (MS Surface). The cooler was a pain to install since with the usb connector was in the way of the ram so I and to re-orientate the bracket.$4,285.94 -
-
Ultimate RTX 3090 Gaming station Ultimate RTX 3090 Gaming station
I built this computer to be the best of the best. Unfortunately i need to upgrade teh graphic card now that theres a 3090ti!... I built this computer to be the best of the best. Unfortunately i need to upgrade teh graphic card now that theres a 3090ti! thats my next upgrade$4,105.92 -
-
The Dream The Dream
This is strictly a gaming rig, and I play tarkov on it mainly. This is strictly a gaming rig, and I play tarkov on it mainly.$4,041.87 -
BTS-Inspired Unit BTS-Inspired Unit
I am builting this from the inspiration of my favorite music group, BTS. This is to motivate me to finally put by content... I am builting this from the inspiration of my favorite music group, BTS. This is to motivate me to finally put by content ideas in motion.$4,017.91 -
-
WHITE evo build WHITE evo build
Custom build with the new Lian li evo case. I have the gpu vertically mounted upside down for the best look Custom build with the new Lian li evo case. I have the gpu vertically mounted upside down for the best look$3,993.93 -
-
ultimate rtx 3090 build ultimate rtx 3090 build
high end system that i built for the best of the best. I dont really play games anymore and its just for benchmarking. I... high end system that i built for the best of the best. I dont really play games anymore and its just for benchmarking. I play downgrade soon$3,899.93 -
The Monolith The Monolith
I mainly play Call of Duty and CyberPunk. I mainly play Call of Duty and CyberPunk.$3,834.94 -
White Ninja White Ninja
I built this computer for a couple of reasons. The sole purpose was for video editing and music creation. Secondly was to... I built this computer for a couple of reasons. The sole purpose was for video editing and music creation. Secondly was to play some light gaming and virtual lab testing system. I am a Musician/IT technician, and music/video is a big part of what I do. So, I needed something that could handle both, and do other things in the process without having to choose weather to close programs because the components are lacking. I use Adobe premiere, photoshop, aftereffects, media encoder, and DaVinci Resolve for video creation and editing. For music I use Pro Tools and Reason. For games I do mostly racing and sports. For my virtual system I use VMware for my test labs for work. With all that said, building something powerful, stable and can handle everything is crucial. I have always used intel for my pass builds but I decided to take a jump to AMD for the first time and must its been great. Went with the Ryzen 3950x and it just powers through everything. Check out the parts I used, some might be overkill but why not lol. I do not like ordering things online and having to wait. So, Microcenter was just the best place to get all the parts I needed to create this build. Just want to say thank you and for making my dream possible.$3,792.92 -
Team Work Makes the Dream Work Team Work Makes the Dream Work
This is a gaming PC that me and my wife built together. It was a great learning experience for the both of us and a great... This is a gaming PC that me and my wife built together. It was a great learning experience for the both of us and a great way to spend time together$3,762.91