Skip to Main Content Area Site Selections - Account, Store, Cart General Information - Store Pickup, Customer Support, Catalog, Service Product Search Form Product Category Navigation Product Brand Navigation Footer

How to enable DMZ on a Tenda Router

Description: How to enable the DMZ settings on a Tenda router. Completing the following steps will disable the firewall to the computer at the designated IP address.

  1. On a computer that is connected to the router, open a web browser. In the address bar at the top, type the IP address of the router (the default for Tenda routers is 192.168.0.1) and press the enter key.
    Browser Address Bar
  2. This will open the login screen for the Tenda router. Type the username and password for the router and press OK.
    Browser Authentication
  3. On the left bar click on Virtual Server and then click on DMZ Settings.
    Virtual Server, DMZ Settings
  4. Enter the IP address for the DMZ Host and check the enable box.
    DMZ Settings
  5. Click Apply.
    Apply to Save Changes