Advertisements / Special Offers Current Store or Chain Wide Selection Pagination Comparison Section Search Refinements Product Results More Advertisements / Special Offers
  • You searched for: TD-EW-24-01
  • Double check your search for typos or spelling errors

    Try one of the suggested keywords displayed when you type in the search field

    Limit the search to one or two words, such as “Laptop” or “Video Card”

    Try using a different word or more general word or phrase, using the full name - not an acronym

  • If you cannot find what you’re looking for, why not let our friendly, trained staff recommend something? Our Customer Service Representatives are available to help.

Content Site Search

Showing 120 of 490 for “TD-EW-24-01”
Community Article Rebuild — Micro Center Rebuild NG89 ✭ July 2 edited July 2 in Help Choosing Parts Thanks in advance, Im rebuilding after 6 years and theres been alot of new tech that has come out. Im just not sure if these will all work together -ASUS ROG Crosshair VIII Hero X570 ATX Motherboard with PCIe 4.0, Integrated 2.5 Gbps LAN,  USB 3.2, SATA, M.2, Node -ryzen 9 3900x -G.Skill tridentz neo -Corsair Force MP600 Configure Your PC                                                                                                                                                                                                                                                                                                                                                                                                                                                                   
NameItemQtyPrice
AMD Ryzen 9 3900X Matisse 3.8GHz 12-Core AM4 Boxed Processor with Wraith Prism CoolerCPUAMD Ryzen 9 3900X Matisse 3.8GHz 12-Core AM4 Boxed Processor with Wraith Prism Cooler1$399.99 EACH
ASUS X570 ROG Crosshair VIII Hero (WI-FI) AMD AM4 ATX MotherboardMotherboardASUS X570 ROG Crosshair VIII Hero (WI-FI) AMD AM4 ATX Motherboard1$379.99 EACH
G.Skill Trident Z RGB 32GB (2 x 16GB) DDR4-3200 PC4-25600 CL16 Dual Channel Desktop Memory Kit F4-3200C16D-32GTZR - BlackRAMG.Skill Trident Z RGB 32GB (2 x 16GB) DDR4-3200 PC4-25600 CL16 Dual Channel Desktop Memory Kit F4-3200C16D-32GTZR - Black1$142.99 EACH
Corsair Force Series 2TB SSD 3D TLC NAND MP600 M.2 2280 PCIe NVMe Internal Solid State DriveM.2 SSDCorsair Force Series 2TB SSD 3D TLC NAND MP600 M.2 2280 PCIe NVMe Internal Solid State Drive1$424.99 EACH
Total$1,347.96
I already have a gtx2080 1000w psu and such so these are the 4 things im looking at getting. Do all of these work well together? any special considerations i have to take into account? 0 · Share on FacebookShare on Twitter Comments TSMikeW admin July 2 The build looks good overall. The Crosshair  VIII Hero is a very good board. I'd go a little higher on the RAM, because you can on this platform and it'll increase your overall performance. Go for the DDR4-3600 CL16 kit. You shouldn't have any issue running it on the XMP Profile.  Also like the Gen4 NVME drive. I've tested the Inland 1TB drive and you will hit 5GB/s on the read. It's not a huge performance in day to day usage but it'll shorten load times. 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article Folding@home Technical Discussion — Micro Center [email protected] Technical Discussion System admin April 20 in Customer Service Questions This discussion was created from comments split from: Join the MicroCenterOfficial [email protected] Team: #257944. 0 · Share on FacebookShare on Twitter Comments JADO ✭ April 20 I have a 6 GPU rig using 8GB RX580 cards.  It has been running fine, but a bit unstable for  2 weeks.  All of a sudden Fold at Home refuses to recognize the GPU's.  It is running fin on 5 of 6 15 9600K cores in a Gigabyte H390 UD motherboard.  I have reinstalled video drivers and reinstalled FAH many times Ii can not make this software find these cards.  Windows reports they are all installed and working normally.  Any ideas? Here is my latest log: *********************** Log Started 2020-04-20T01:57:45Z *********************** 01:57:45:****************************** FAHClient ****************************** 01:57:45:        Version: 7.6.9 01:57:45:         Author: Joseph Coffland <[email protected]> 01:57:45:      Copyright: 2020 foldingathome.org 01:57:45:       Homepage: https://foldingathome.org/ 01:57:45:           Date: Apr 17 2020 01:57:45:           Time: 11:13:06 01:57:45:       Revision: 398c2b17fa535e0cc6c9d10856b2154c32771646 01:57:45:         Branch: master 01:57:45:       Compiler: Visual C++ 2008 01:57:45:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:57:45:       Platform: win32 10 01:57:45:           Bits: 32 01:57:45:           Mode: Release 01:57:45:           Args: --open-web-control 01:57:45:         Config: C:\Users\jim\AppData\Roaming\FAHClient\config.xml 01:57:45:******************************** CBang ******************************** 01:57:45:           Date: Apr 17 2020 01:57:45:           Time: 11:10:09 01:57:45:       Revision: 2fb0be7809c5e45287a122ca5fbc15b5ae859a3b 01:57:45:         Branch: master 01:57:45:       Compiler: Visual C++ 2008 01:57:45:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:57:45:       Platform: win32 10 01:57:45:           Bits: 32 01:57:45:           Mode: Release 01:57:45:******************************* System ******************************** 01:57:45:            CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 01:57:45:         CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 01:57:45:           CPUs: 6 01:57:45:         Memory: 15.87GiB 01:57:45:    Free Memory: 12.65GiB 01:57:45:        Threads: WINDOWS_THREADS 01:57:45:     OS Version: 6.2 01:57:45:    Has Battery: false 01:57:45:     On Battery: false 01:57:45:     UTC Offset: -4 01:57:45:            PID: 11932 01:57:45:            CWD: C:\Users\jim\AppData\Roaming\FAHClient 01:57:45:             OS: Windows 10 Enterprise 01:57:45:        OS Arch: AMD64 01:57:45:           GPUs: 0 01:57:45:           CUDA: Not detected: Failed to open dynamic library 'nvcuda.dll': The 01:57:45:                 specified module could not be found. 01:57:45: 01:57:45:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 1: Platform:0 Device:1 Bus:4 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 2: Platform:0 Device:2 Bus:8 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 3: Platform:0 Device:3 Bus:9 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 4: Platform:0 Device:4 Bus:3 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 5: Platform:0 Device:5 Bus:5 Slot:0 Compute:1.2 Driver:3004.8 01:57:45:OpenCL Device 6: Platform:1 Device:0 Bus:NA Slot:NA Compute:2.1 Driver:26.20 01:57:45:  Win32 Service: false 01:57:45:******************************* libFAH ******************************** 01:57:45:           Date: Apr 15 2020 01:57:45:           Time: 14:53:14 01:57:45:       Revision: 216968bc7025029c841ed6e36e81a03a316890d3 01:57:45:         Branch: master 01:57:45:       Compiler: Visual C++ 2008 01:57:45:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:57:45:       Platform: win32 10 01:57:45:           Bits: 32 01:57:45:           Mode: Release 01:57:45:*********************************************************************** 01:57:45: 01:57:45:  01:57:45:  01:57:45: 01:57:45:Trying to access database... 01:57:45:Successfully acquired database lock 01:57:45:Enabled folding slot 00: READY cpu:5 01:57:45:WU00:FS00:Starting 01:57:45:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 5 01:57:45:WU00:FS00:Started FahCore on PID 1780 01:57:45:WU00:FS00:Core PID:1980 01:57:45:WU00:FS00:FahCore 0xa7 started 01:57:46:WU00:FS00:0xa7:*********************** Log Started 2020-04-20T01:57:45Z *********************** 01:57:46:WU00:FS00:0xa7:************************** Gromacs [email protected] Core *************************** 01:57:46:WU00:FS00:0xa7:       Type: 0xa7 01:57:46:WU00:FS00:0xa7:       Core: Gromacs 01:57:46:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 1780 -checkpoint 15 -np 5 01:57:46:WU00:FS00:0xa7:************************************ CBang ************************************* 01:57:46:WU00:FS00:0xa7:       Date: Oct 26 2019 01:57:46:WU00:FS00:0xa7:       Time: 01:38:25 01:57:46:WU00:FS00:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 01:57:46:WU00:FS00:0xa7:     Branch: master 01:57:46:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 01:57:46:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:57:46:WU00:FS00:0xa7:   Platform: win32 10 01:57:46:WU00:FS00:0xa7:       Bits: 64 01:57:46:WU00:FS00:0xa7:       Mode: Release 01:57:46:WU00:FS00:0xa7:************************************ System ************************************ 01:57:46:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 01:57:46:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 01:57:46:WU00:FS00:0xa7:       CPUs: 6 01:57:46:WU00:FS00:0xa7:     Memory: 15.87GiB 01:57:46:WU00:FS00:0xa7:Free Memory: 12.60GiB 01:57:46:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS 01:57:46:WU00:FS00:0xa7: OS Version: 6.2 01:57:46:WU00:FS00:0xa7:Has Battery: false 01:57:46:WU00:FS00:0xa7: On Battery: false 01:57:46:WU00:FS00:0xa7: UTC Offset: -4 01:57:46:WU00:FS00:0xa7:        PID: 1980 01:57:46:WU00:FS00:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 01:57:46:WU00:FS00:0xa7:******************************** Build - libFAH ******************************** 01:57:46:WU00:FS00:0xa7:    Version: 0.0.18 01:57:46:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]> 01:57:46:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org 01:57:46:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/ 01:57:46:WU00:FS00:0xa7:       Date: Oct 26 2019 01:57:46:WU00:FS00:0xa7:       Time: 01:52:30 01:57:46:WU00:FS00:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 01:57:46:WU00:FS00:0xa7:     Branch: master 01:57:46:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 01:57:46:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:57:46:WU00:FS00:0xa7:   Platform: win32 10 01:57:46:WU00:FS00:0xa7:       Bits: 64 01:57:46:WU00:FS00:0xa7:       Mode: Release 01:57:46:WU00:FS00:0xa7:************************************ Build ************************************* 01:57:46:WU00:FS00:0xa7:       SIMD: avx_256 01:57:46:WU00:FS00:0xa7:******************************************************************************** 01:57:46:WU00:FS00:0xa7:Project: 14583 (Run 0, Clone 1713, Gen 21) 01:57:46:WU00:FS00:0xa7:Unit: 0x0000001680fccb025e8bc8e7441c1784 01:57:46:WU00:FS00:0xa7:Digital signatures verified 01:57:46:WU00:FS00:0xa7:Reducing thread count from 5 to 4 to avoid domain decomposition by a prime number > 3 01:57:46:WU00:FS00:0xa7:Calling: mdrun -s frame21.tpr -o frame21.trr -x frame21.xtc -cpi state.cpt -cpt 15 -nt 4 01:57:46:WU00:FS00:0xa7:Steps: first=1312500 total=62500 01:57:47:4:127.0.0.1:New Web session 01:57:49:WU00:FS00:0xa7:Completed 422 out of 62500 steps (0%) 01:58:22:WU00:FS00:0xa7:Completed 625 out of 62500 steps (1%) 01:58:46:Saving configuration to config.xml 01:58:46: 01:58:46:  01:58:46:  01:58:46: 01:58:46:  01:58:46:  01:58:46: 01:59:31:Adding folding slot 01: READY cpu:3 01:59:31:Saving configuration to config.xml 01:59:31: 01:59:31:  01:59:31:  01:59:31: 01:59:31:  01:59:31:  01:59:31:  01:59:31:    01:59:31:  01:59:31: 01:59:31:FS00:Shutting core down 01:59:31:WU00:FS00:0xa7:WARNING:Console control signal 1 on PID 1980 01:59:31:WU00:FS00:0xa7:Exiting, please wait. . . 01:59:31:WU01:FS01:Connecting to 65.254.110.245:80 01:59:31:WU01:FS01:Assigned to work server 13.90.152.57 01:59:31:WU01:FS01:Requesting new work unit for slot 01: READY cpu:3 from 13.90.152.57 01:59:31:WU01:FS01:Connecting to 13.90.152.57:8080 01:59:32:WU01:FS01:Downloading 4.50MiB 01:59:33:WU01:FS01:Download complete 01:59:33:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:13860 run:0 clone:25182 gen:12 core:0xa7 unit:0x0000000e0d5a98395e940a09d8b7eb69 01:59:33:WU01:FS01:Starting 01:59:33:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 01 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 3 01:59:33:WU01:FS01:Started FahCore on PID 10808 01:59:33:WU01:FS01:Core PID:9748 01:59:33:WU01:FS01:FahCore 0xa7 started 01:59:34:WU01:FS01:0xa7:*********************** Log Started 2020-04-20T01:59:33Z *********************** 01:59:34:WU01:FS01:0xa7:************************** Gromacs [email protected] Core *************************** 01:59:34:WU01:FS01:0xa7:       Type: 0xa7 01:59:34:WU01:FS01:0xa7:       Core: Gromacs 01:59:34:WU01:FS01:0xa7:       Args: -dir 01 -suffix 01 -version 706 -lifeline 10808 -checkpoint 15 -np 01:59:34:WU01:FS01:0xa7:             3 01:59:34:WU01:FS01:0xa7:************************************ CBang ************************************* 01:59:34:WU01:FS01:0xa7:       Date: Oct 26 2019 01:59:34:WU01:FS01:0xa7:       Time: 01:38:25 01:59:34:WU01:FS01:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 01:59:34:WU01:FS01:0xa7:     Branch: master 01:59:34:WU01:FS01:0xa7:   Compiler: Visual C++ 2008 01:59:34:WU01:FS01:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:59:34:WU01:FS01:0xa7:   Platform: win32 10 01:59:34:WU01:FS01:0xa7:       Bits: 64 01:59:34:WU01:FS01:0xa7:       Mode: Release 01:59:34:WU01:FS01:0xa7:************************************ System ************************************ 01:59:34:WU01:FS01:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 01:59:34:WU01:FS01:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 01:59:34:WU01:FS01:0xa7:       CPUs: 6 01:59:34:WU01:FS01:0xa7:     Memory: 15.87GiB 01:59:34:WU01:FS01:0xa7:Free Memory: 12.13GiB 01:59:34:WU01:FS01:0xa7:    Threads: WINDOWS_THREADS 01:59:34:WU01:FS01:0xa7: OS Version: 6.2 01:59:34:WU01:FS01:0xa7:Has Battery: false 01:59:34:WU01:FS01:0xa7: On Battery: false 01:59:34:WU01:FS01:0xa7: UTC Offset: -4 01:59:34:WU01:FS01:0xa7:        PID: 9748 01:59:34:WU01:FS01:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 01:59:34:WU01:FS01:0xa7:******************************** Build - libFAH ******************************** 01:59:34:WU01:FS01:0xa7:    Version: 0.0.18 01:59:34:WU01:FS01:0xa7:     Author: Joseph Coffland <[email protected]> 01:59:34:WU01:FS01:0xa7:  Copyright: 2019 foldingathome.org 01:59:34:WU01:FS01:0xa7:   Homepage: https://foldingathome.org/ 01:59:34:WU01:FS01:0xa7:       Date: Oct 26 2019 01:59:34:WU01:FS01:0xa7:       Time: 01:52:30 01:59:34:WU01:FS01:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 01:59:34:WU01:FS01:0xa7:     Branch: master 01:59:34:WU01:FS01:0xa7:   Compiler: Visual C++ 2008 01:59:34:WU01:FS01:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:59:34:WU01:FS01:0xa7:   Platform: win32 10 01:59:34:WU01:FS01:0xa7:       Bits: 64 01:59:34:WU01:FS01:0xa7:       Mode: Release 01:59:34:WU01:FS01:0xa7:************************************ Build ************************************* 01:59:34:WU01:FS01:0xa7:       SIMD: avx_256 01:59:34:WU01:FS01:0xa7:******************************************************************************** 01:59:34:WU01:FS01:0xa7:Project: 13860 (Run 0, Clone 25182, Gen 12) 01:59:34:WU01:FS01:0xa7:Unit: 0x0000000e0d5a98395e940a09d8b7eb69 01:59:34:WU01:FS01:0xa7:Reading tar file core.xml 01:59:34:WU01:FS01:0xa7:Reading tar file frame12.tpr 01:59:34:WU01:FS01:0xa7:Digital signatures verified 01:59:34:WU01:FS01:0xa7:Calling: mdrun -s frame12.tpr -o frame12.trr -x frame12.xtc -e frame12.edr -cpt 15 -nt 3 01:59:34:WU01:FS01:0xa7:Steps: first=1500000 total=125000 01:59:34:WU00:FS00:0xa7:[email protected] Core Shutdown: INTERRUPTED 01:59:34:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66) 01:59:35:WU00:FS00:Starting 01:59:35:WARNING:WU00:FS00:Changed SMP threads from 5 to 2 this can cause some work units to fail 01:59:35:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 2 01:59:35:WU00:FS00:Started FahCore on PID 9712 01:59:35:WU00:FS00:Core PID:11224 01:59:35:WU00:FS00:FahCore 0xa7 started 01:59:35:WU01:FS01:0xa7:Completed 1 out of 125000 steps (0%) 01:59:35:WU00:FS00:0xa7:*********************** Log Started 2020-04-20T01:59:35Z *********************** 01:59:35:WU00:FS00:0xa7:************************** Gromacs [email protected] Core *************************** 01:59:35:WU00:FS00:0xa7:       Type: 0xa7 01:59:35:WU00:FS00:0xa7:       Core: Gromacs 01:59:35:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 9712 -checkpoint 15 -np 2 01:59:35:WU00:FS00:0xa7:************************************ CBang ************************************* 01:59:35:WU00:FS00:0xa7:       Date: Oct 26 2019 01:59:35:WU00:FS00:0xa7:       Time: 01:38:25 01:59:35:WU00:FS00:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 01:59:35:WU00:FS00:0xa7:     Branch: master 01:59:35:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 01:59:35:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:59:35:WU00:FS00:0xa7:   Platform: win32 10 01:59:35:WU00:FS00:0xa7:       Bits: 64 01:59:35:WU00:FS00:0xa7:       Mode: Release 01:59:35:WU00:FS00:0xa7:************************************ System ************************************ 01:59:35:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 01:59:35:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 01:59:35:WU00:FS00:0xa7:       CPUs: 6 01:59:35:WU00:FS00:0xa7:     Memory: 15.87GiB 01:59:35:WU00:FS00:0xa7:Free Memory: 12.43GiB 01:59:35:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS 01:59:35:WU00:FS00:0xa7: OS Version: 6.2 01:59:35:WU00:FS00:0xa7:Has Battery: false 01:59:35:WU00:FS00:0xa7: On Battery: false 01:59:35:WU00:FS00:0xa7: UTC Offset: -4 01:59:35:WU00:FS00:0xa7:        PID: 11224 01:59:35:WU00:FS00:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 01:59:35:WU00:FS00:0xa7:******************************** Build - libFAH ******************************** 01:59:35:WU00:FS00:0xa7:    Version: 0.0.18 01:59:35:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]> 01:59:35:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org 01:59:35:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/ 01:59:35:WU00:FS00:0xa7:       Date: Oct 26 2019 01:59:35:WU00:FS00:0xa7:       Time: 01:52:30 01:59:35:WU00:FS00:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 01:59:35:WU00:FS00:0xa7:     Branch: master 01:59:35:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 01:59:35:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 01:59:35:WU00:FS00:0xa7:   Platform: win32 10 01:59:35:WU00:FS00:0xa7:       Bits: 64 01:59:35:WU00:FS00:0xa7:       Mode: Release 01:59:35:WU00:FS00:0xa7:************************************ Build ************************************* 01:59:35:WU00:FS00:0xa7:       SIMD: avx_256 01:59:35:WU00:FS00:0xa7:******************************************************************************** 01:59:35:WU00:FS00:0xa7:Project: 14583 (Run 0, Clone 1713, Gen 21) 01:59:35:WU00:FS00:0xa7:Unit: 0x0000001680fccb025e8bc8e7441c1784 01:59:35:WU00:FS00:0xa7:Digital signatures verified 01:59:35:WU00:FS00:0xa7:Calling: mdrun -s frame21.tpr -o frame21.trr -x frame21.xtc -cpi state.cpt -cpt 15 -nt 2 01:59:35:WU00:FS00:0xa7:Steps: first=1312500 total=62500 01:59:39:WU00:FS00:0xa7:Completed 1052 out of 62500 steps (1%) 01:59:47:Saving configuration to config.xml 01:59:47: 01:59:47:  01:59:47:  01:59:47: 01:59:47:  01:59:47:  01:59:47:  01:59:47:    01:59:47:  01:59:47: 02:00:08:Adding folding slot 02: READY cpu:2 02:00:08:Saving configuration to config.xml 02:00:08: 02:00:08:  02:00:08:  02:00:08: 02:00:08:  02:00:08:  02:00:08:  02:00:08:    02:00:08:  02:00:08:  02:00:08:    02:00:08:  02:00:08: 02:00:08:FS00:Shutting core down 02:00:08:WU00:FS00:0xa7:WARNING:Console control signal 1 on PID 11224 02:00:08:WU00:FS00:0xa7:Exiting, please wait. . . 02:00:08:WU02:FS02:Connecting to 65.254.110.245:80 02:00:08:WU02:FS02:Assigned to work server 150.136.14.110 02:00:08:WU02:FS02:Requesting new work unit for slot 02: READY cpu:2 from 150.136.14.110 02:00:08:WU02:FS02:Connecting to 150.136.14.110:8080 02:00:09:WU02:FS02:Downloading 1.25MiB 02:00:09:WU02:FS02:Download complete 02:00:09:WU02:FS02:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:16403 run:1512 clone:1 gen:61 core:0xa7 unit:0x0000004096880e6e5e8be086c7e76b5e 02:00:09:WU02:FS02:Starting 02:00:09:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 02 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 2 02:00:09:WU02:FS02:Started FahCore on PID 312 02:00:09:WU02:FS02:Core PID:8152 02:00:09:WU02:FS02:FahCore 0xa7 started 02:00:09:WU02:FS02:0xa7:*********************** Log Started 2020-04-20T02:00:09Z *********************** 02:00:09:WU02:FS02:0xa7:************************** Gromacs [email protected] Core *************************** 02:00:09:WU02:FS02:0xa7:       Type: 0xa7 02:00:09:WU02:FS02:0xa7:       Core: Gromacs 02:00:09:WU02:FS02:0xa7:       Args: -dir 02 -suffix 01 -version 706 -lifeline 312 -checkpoint 15 -np 2 02:00:09:WU02:FS02:0xa7:************************************ CBang ************************************* 02:00:09:WU02:FS02:0xa7:       Date: Oct 26 2019 02:00:09:WU02:FS02:0xa7:       Time: 01:38:25 02:00:09:WU02:FS02:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 02:00:09:WU02:FS02:0xa7:     Branch: master 02:00:09:WU02:FS02:0xa7:   Compiler: Visual C++ 2008 02:00:09:WU02:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:09:WU02:FS02:0xa7:   Platform: win32 10 02:00:09:WU02:FS02:0xa7:       Bits: 64 02:00:09:WU02:FS02:0xa7:       Mode: Release 02:00:09:WU02:FS02:0xa7:************************************ System ************************************ 02:00:09:WU02:FS02:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 02:00:09:WU02:FS02:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 02:00:09:WU02:FS02:0xa7:       CPUs: 6 02:00:09:WU02:FS02:0xa7:     Memory: 15.87GiB 02:00:10:WU02:FS02:0xa7:Free Memory: 12.03GiB 02:00:10:WU02:FS02:0xa7:    Threads: WINDOWS_THREADS 02:00:10:WU02:FS02:0xa7: OS Version: 6.2 02:00:10:WU02:FS02:0xa7:Has Battery: false 02:00:10:WU02:FS02:0xa7: On Battery: false 02:00:10:WU02:FS02:0xa7: UTC Offset: -4 02:00:10:WU02:FS02:0xa7:        PID: 8152 02:00:10:WU02:FS02:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 02:00:10:WU02:FS02:0xa7:******************************** Build - libFAH ******************************** 02:00:10:WU02:FS02:0xa7:    Version: 0.0.18 02:00:10:WU02:FS02:0xa7:     Author: Joseph Coffland <[email protected]> 02:00:10:WU02:FS02:0xa7:  Copyright: 2019 foldingathome.org 02:00:10:WU02:FS02:0xa7:   Homepage: https://foldingathome.org/ 02:00:10:WU02:FS02:0xa7:       Date: Oct 26 2019 02:00:10:WU02:FS02:0xa7:       Time: 01:52:30 02:00:10:WU02:FS02:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 02:00:10:WU02:FS02:0xa7:     Branch: master 02:00:10:WU02:FS02:0xa7:   Compiler: Visual C++ 2008 02:00:10:WU02:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:10:WU02:FS02:0xa7:   Platform: win32 10 02:00:10:WU02:FS02:0xa7:       Bits: 64 02:00:10:WU02:FS02:0xa7:       Mode: Release 02:00:10:WU02:FS02:0xa7:************************************ Build ************************************* 02:00:10:WU02:FS02:0xa7:       SIMD: avx_256 02:00:10:WU02:FS02:0xa7:******************************************************************************** 02:00:10:WU02:FS02:0xa7:Project: 16403 (Run 1512, Clone 1, Gen 61) 02:00:10:WU02:FS02:0xa7:Unit: 0x0000004096880e6e5e8be086c7e76b5e 02:00:10:WU02:FS02:0xa7:Reading tar file core.xml 02:00:10:WU02:FS02:0xa7:Reading tar file frame61.tpr 02:00:10:WU02:FS02:0xa7:Digital signatures verified 02:00:10:WU02:FS02:0xa7:Calling: mdrun -s frame61.tpr -o frame61.trr -x frame61.xtc -cpt 15 -nt 2 02:00:10:WU02:FS02:0xa7:Steps: first=30500000 total=500000 02:00:10:WU02:FS02:0xa7:Completed 1 out of 500000 steps (0%) 02:00:14:WU00:FS00:0xa7:[email protected] Core Shutdown: INTERRUPTED 02:00:14:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66) 02:00:26:Adding folding slot 03: READY cpu:4 02:00:26:Saving configuration to config.xml 02:00:26: 02:00:26:  02:00:26:  02:00:26: 02:00:26:  02:00:26:  02:00:26:  02:00:26:    02:00:26:  02:00:26:  02:00:26:    02:00:26:  02:00:26:  02:00:26:    02:00:26:  02:00:26: 02:00:26:WU03:FS03:Connecting to 65.254.110.245:80 02:00:26:WU03:FS03:Assigned to work server 40.114.52.201 02:00:26:WU03:FS03:Requesting new work unit for slot 03: READY cpu:4 from 40.114.52.201 02:00:26:WU03:FS03:Connecting to 40.114.52.201:8080 02:00:26:WU03:FS03:Downloading 2.14MiB 02:00:27:WU03:FS03:Download complete 02:00:27:WU03:FS03:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:13850 run:0 clone:15332 gen:44 core:0xa7 unit:0x0000003a287234c95e7303679e449342 02:00:27:WU03:FS03:Starting 02:00:27:WU03:FS03:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 03 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 4 02:00:27:WU03:FS03:Started FahCore on PID 2056 02:00:27:WU03:FS03:Core PID:10812 02:00:27:WU03:FS03:FahCore 0xa7 started 02:00:27:WU03:FS03:0xa7:*********************** Log Started 2020-04-20T02:00:27Z *********************** 02:00:27:WU03:FS03:0xa7:************************** Gromacs [email protected] Core *************************** 02:00:27:WU03:FS03:0xa7:       Type: 0xa7 02:00:27:WU03:FS03:0xa7:       Core: Gromacs 02:00:27:WU03:FS03:0xa7:       Args: -dir 03 -suffix 01 -version 706 -lifeline 2056 -checkpoint 15 -np 4 02:00:27:WU03:FS03:0xa7:************************************ CBang ************************************* 02:00:27:WU03:FS03:0xa7:       Date: Oct 26 2019 02:00:27:WU03:FS03:0xa7:       Time: 01:38:25 02:00:27:WU03:FS03:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 02:00:27:WU03:FS03:0xa7:     Branch: master 02:00:27:WU03:FS03:0xa7:   Compiler: Visual C++ 2008 02:00:27:WU03:FS03:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:27:WU03:FS03:0xa7:   Platform: win32 10 02:00:27:WU03:FS03:0xa7:       Bits: 64 02:00:27:WU03:FS03:0xa7:       Mode: Release 02:00:27:WU03:FS03:0xa7:************************************ System ************************************ 02:00:27:WU03:FS03:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 02:00:27:WU03:FS03:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 02:00:27:WU03:FS03:0xa7:       CPUs: 6 02:00:27:WU03:FS03:0xa7:     Memory: 15.87GiB 02:00:27:WU03:FS03:0xa7:Free Memory: 12.36GiB 02:00:27:WU03:FS03:0xa7:    Threads: WINDOWS_THREADS 02:00:27:WU03:FS03:0xa7: OS Version: 6.2 02:00:27:WU03:FS03:0xa7:Has Battery: false 02:00:27:WU03:FS03:0xa7: On Battery: false 02:00:27:WU03:FS03:0xa7: UTC Offset: -4 02:00:27:WU03:FS03:0xa7:        PID: 10812 02:00:27:WU03:FS03:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 02:00:27:WU03:FS03:0xa7:******************************** Build - libFAH ******************************** 02:00:27:WU03:FS03:0xa7:    Version: 0.0.18 02:00:27:WU03:FS03:0xa7:     Author: Joseph Coffland <[email protected]> 02:00:27:WU03:FS03:0xa7:  Copyright: 2019 foldingathome.org 02:00:27:WU03:FS03:0xa7:   Homepage: https://foldingathome.org/ 02:00:27:WU03:FS03:0xa7:       Date: Oct 26 2019 02:00:27:WU03:FS03:0xa7:       Time: 01:52:30 02:00:27:WU03:FS03:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 02:00:27:WU03:FS03:0xa7:     Branch: master 02:00:27:WU03:FS03:0xa7:   Compiler: Visual C++ 2008 02:00:27:WU03:FS03:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:27:WU03:FS03:0xa7:   Platform: win32 10 02:00:27:WU03:FS03:0xa7:       Bits: 64 02:00:27:WU03:FS03:0xa7:       Mode: Release 02:00:27:WU03:FS03:0xa7:************************************ Build ************************************* 02:00:27:WU03:FS03:0xa7:       SIMD: avx_256 02:00:27:WU03:FS03:0xa7:******************************************************************************** 02:00:27:WU03:FS03:0xa7:Project: 13850 (Run 0, Clone 15332, Gen 44) 02:00:27:WU03:FS03:0xa7:Unit: 0x0000003a287234c95e7303679e449342 02:00:27:WU03:FS03:0xa7:Reading tar file core.xml 02:00:27:WU03:FS03:0xa7:Reading tar file frame44.tpr 02:00:27:WU03:FS03:0xa7:Digital signatures verified 02:00:27:WU03:FS03:0xa7:Calling: mdrun -s frame44.tpr -o frame44.trr -x frame44.xtc -e frame44.edr -cpt 15 -nt 4 02:00:27:WU03:FS03:0xa7:Steps: first=22000000 total=500000 02:00:28:WU03:FS03:0xa7:Completed 1 out of 500000 steps (0%) 02:00:33:WU01:FS01:0xa7:Completed 1250 out of 125000 steps (1%) 02:00:35:WU00:FS00:Starting 02:00:35:WARNING:WU00:FS00:Changed SMP threads from 2 to 1 this can cause some work units to fail 02:00:35:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 1 02:00:35:WU00:FS00:Started FahCore on PID 2600 02:00:35:WU00:FS00:Core PID:11748 02:00:35:WU00:FS00:FahCore 0xa7 started 02:00:35:WU00:FS00:0xa7:*********************** Log Started 2020-04-20T02:00:35Z *********************** 02:00:35:WU00:FS00:0xa7:************************** Gromacs [email protected] Core *************************** 02:00:35:WU00:FS00:0xa7:       Type: 0xa7 02:00:35:WU00:FS00:0xa7:       Core: Gromacs 02:00:35:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 2600 -checkpoint 15 -np 1 02:00:35:WU00:FS00:0xa7:************************************ CBang ************************************* 02:00:35:WU00:FS00:0xa7:       Date: Oct 26 2019 02:00:35:WU00:FS00:0xa7:       Time: 01:38:25 02:00:35:WU00:FS00:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 02:00:35:WU00:FS00:0xa7:     Branch: master 02:00:35:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 02:00:35:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:35:WU00:FS00:0xa7:   Platform: win32 10 02:00:35:WU00:FS00:0xa7:       Bits: 64 02:00:35:WU00:FS00:0xa7:       Mode: Release 02:00:35:WU00:FS00:0xa7:************************************ System ************************************ 02:00:35:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 02:00:35:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 02:00:35:WU00:FS00:0xa7:       CPUs: 6 02:00:35:WU00:FS00:0xa7:     Memory: 15.87GiB 02:00:35:WU00:FS00:0xa7:Free Memory: 12.30GiB 02:00:35:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS 02:00:35:WU00:FS00:0xa7: OS Version: 6.2 02:00:35:WU00:FS00:0xa7:Has Battery: false 02:00:35:WU00:FS00:0xa7: On Battery: false 02:00:35:WU00:FS00:0xa7: UTC Offset: -4 02:00:35:WU00:FS00:0xa7:        PID: 11748 02:00:35:WU00:FS00:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 02:00:35:WU00:FS00:0xa7:******************************** Build - libFAH ******************************** 02:00:35:WU00:FS00:0xa7:    Version: 0.0.18 02:00:35:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]> 02:00:35:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org 02:00:35:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/ 02:00:35:WU00:FS00:0xa7:       Date: Oct 26 2019 02:00:35:WU00:FS00:0xa7:       Time: 01:52:30 02:00:35:WU00:FS00:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 02:00:35:WU00:FS00:0xa7:     Branch: master 02:00:35:WU00:FS00:0xa7:   Compiler: Visual C++ 2008 02:00:35:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:35:WU00:FS00:0xa7:   Platform: win32 10 02:00:35:WU00:FS00:0xa7:       Bits: 64 02:00:35:WU00:FS00:0xa7:       Mode: Release 02:00:35:WU00:FS00:0xa7:************************************ Build ************************************* 02:00:35:WU00:FS00:0xa7:       SIMD: avx_256 02:00:35:WU00:FS00:0xa7:******************************************************************************** 02:00:35:WU00:FS00:0xa7:Project: 14583 (Run 0, Clone 1713, Gen 21) 02:00:35:WU00:FS00:0xa7:Unit: 0x0000001680fccb025e8bc8e7441c1784 02:00:35:WU00:FS00:0xa7:Digital signatures verified 02:00:35:WU00:FS00:0xa7:Calling: mdrun -s frame21.tpr -o frame21.trr -x frame21.xtc -cpi state.cpt -cpt 15 -nt 1 02:00:36:WU00:FS00:0xa7:Steps: first=1312500 total=62500 02:00:39:WU00:FS00:0xa7:Completed 1162 out of 62500 steps (1%) 02:00:46:Adding folding slot 04: READY cpu:5 02:00:46:Saving configuration to config.xml 02:00:46: 02:00:46:  02:00:46:  02:00:46: 02:00:46:  02:00:46:  02:00:46:  02:00:46:    02:00:46:  02:00:46:  02:00:46:    02:00:46:  02:00:46:  02:00:46:    02:00:46:  02:00:46:  02:00:46:    02:00:46:  02:00:46: 02:00:46:WU04:FS04:Connecting to 65.254.110.245:80 02:00:46:WARNING:WU04:FS04:Failed to get assignment from '65.254.110.245:80': No WUs available for this configuration 02:00:46:WU04:FS04:Connecting to 18.218.241.186:80 02:00:46:WU04:FS04:Assigned to work server 128.252.203.4 02:00:46:WU04:FS04:Requesting new work unit for slot 04: READY cpu:5 from 128.252.203.4 02:00:46:WU04:FS04:Connecting to 128.252.203.4:8080 02:00:47:WU04:FS04:Downloading 4.35MiB 02:00:48:Saving configuration to config.xml 02:00:48: 02:00:48:  02:00:48:  02:00:48: 02:00:48:  02:00:48:  02:00:48:  02:00:48:    02:00:48:  02:00:48:  02:00:48:    02:00:48:  02:00:48:  02:00:48:    02:00:48:  02:00:48:  02:00:48:    02:00:48:  02:00:48: 02:00:48:WU04:FS04:Download complete 02:00:48:WU04:FS04:Received Unit: id:04 state:DOWNLOAD error:NO_ERROR project:13840 run:0 clone:4728 gen:49 core:0xa7 unit:0x0000003380fccb045e6ee12fb139430a 02:00:48:WU04:FS04:Starting 02:00:48:WU04:FS04:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\jim\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/v7/win/64bit/avx/Core_a7.fah/FahCore_a7.exe -dir 04 -suffix 01 -version 706 -lifeline 11932 -checkpoint 15 -np 5 02:00:48:WU04:FS04:Started FahCore on PID 11872 02:00:48:WU04:FS04:Core PID:11912 02:00:48:WU04:FS04:FahCore 0xa7 started 02:00:49:WU04:FS04:0xa7:*********************** Log Started 2020-04-20T02:00:48Z *********************** 02:00:49:WU04:FS04:0xa7:************************** Gromacs [email protected] Core *************************** 02:00:49:WU04:FS04:0xa7:       Type: 0xa7 02:00:49:WU04:FS04:0xa7:       Core: Gromacs 02:00:49:WU04:FS04:0xa7:       Args: -dir 04 -suffix 01 -version 706 -lifeline 11872 -checkpoint 15 -np 02:00:49:WU04:FS04:0xa7:             5 02:00:49:WU04:FS04:0xa7:************************************ CBang ************************************* 02:00:49:WU04:FS04:0xa7:       Date: Oct 26 2019 02:00:49:WU04:FS04:0xa7:       Time: 01:38:25 02:00:49:WU04:FS04:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f 02:00:49:WU04:FS04:0xa7:     Branch: master 02:00:49:WU04:FS04:0xa7:   Compiler: Visual C++ 2008 02:00:49:WU04:FS04:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:49:WU04:FS04:0xa7:   Platform: win32 10 02:00:49:WU04:FS04:0xa7:       Bits: 64 02:00:49:WU04:FS04:0xa7:       Mode: Release 02:00:49:WU04:FS04:0xa7:************************************ System ************************************ 02:00:49:WU04:FS04:0xa7:        CPU: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 02:00:49:WU04:FS04:0xa7:     CPU ID: GenuineIntel Family 6 Model 158 Stepping 13 02:00:49:WU04:FS04:0xa7:       CPUs: 6 02:00:49:WU04:FS04:0xa7:     Memory: 15.87GiB 02:00:49:WU04:FS04:0xa7:Free Memory: 12.03GiB 02:00:49:WU04:FS04:0xa7:    Threads: WINDOWS_THREADS 02:00:49:WU04:FS04:0xa7: OS Version: 6.2 02:00:49:WU04:FS04:0xa7:Has Battery: false 02:00:49:WU04:FS04:0xa7: On Battery: false 02:00:49:WU04:FS04:0xa7: UTC Offset: -4 02:00:49:WU04:FS04:0xa7:        PID: 11912 02:00:49:WU04:FS04:0xa7:        CWD: C:\Users\jim\AppData\Roaming\FAHClient\work 02:00:49:WU04:FS04:0xa7:******************************** Build - libFAH ******************************** 02:00:49:WU04:FS04:0xa7:    Version: 0.0.18 02:00:49:WU04:FS04:0xa7:     Author: Joseph Coffland <[email protected]> 02:00:49:WU04:FS04:0xa7:  Copyright: 2019 foldingathome.org 02:00:49:WU04:FS04:0xa7:   Homepage: https://foldingathome.org/ 02:00:49:WU04:FS04:0xa7:       Date: Oct 26 2019 02:00:49:WU04:FS04:0xa7:       Time: 01:52:30 02:00:49:WU04:FS04:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e 02:00:49:WU04:FS04:0xa7:     Branch: master 02:00:49:WU04:FS04:0xa7:   Compiler: Visual C++ 2008 02:00:49:WU04:FS04:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT 02:00:49:WU04:FS04:0xa7:   Platform: win32 10 02:00:49:WU04:FS04:0xa7:       Bits: 64 02:00:49:WU04:FS04:0xa7:       Mode: Release 02:00:49:WU04:FS04:0xa7:************************************ Build ************************************* 02:00:49:WU04:FS04:0xa7:       SIMD: avx_256 02:00:49:WU04:FS04:0xa7:******************************************************************************** 02:00:49:WU04:FS04:0xa7:Project: 13840 (Run 0, Clone 4728, Gen 49) 02:00:49:WU04:FS04:0xa7:Unit: 0x0000003380fccb045e6ee12fb139430a 02:00:49:WU04:FS04:0xa7:Reading tar file core.xml 02:00:49:WU04:FS04:0xa7:Reading tar file frame49.tpr 02:00:49:WU04:FS04:0xa7:Digital signatures verified 02:00:49:WU04:FS04:0xa7:Reducing thread count from 5 to 4 to avoid domain decomposition by a prime number > 3 02:00:49:WU04:FS04:0xa7:Calling: mdrun -s frame49.tpr -o frame49.trr -x frame49.xtc -e frame49.edr -cpt 15 -nt 4 02:00:50:WU04:FS04:0xa7:Steps: first=6125000 total=125000 02:00:52:WU04:FS04:0xa7:Completed 1 out of 125000 steps (0%) 02:01:31:WU00:FS00:0xa7:Completed 1250 out of 62500 steps (2%) 02:02:45:Connecting to assign1.foldingathome.org:80 02:02:45:Updated GPUs.txt 02:02:57:WU01:FS01:0xa7:Completed 2500 out of 125000 steps (2%) 02:03:39:WU04:FS04:0xa7:Completed 1250 out of 125000 steps (1%) 02:03:51:Saving configuration to config.xml 02:03:51: 02:03:51:  02:03:51:  02:03:51:  0 · Share on FacebookShare on Twitter TSMichaelB admin April 20 @JADO have you attempted to manually add them by going to Configure > Slots > Add? You should be able to leave the GPU value at -1. From there, add a slot for each potential GPU connected to the system, then save. They should reappear. If that doesn't work, you may be missing the GPUs.txt file in your [email protected] Client AppData directory. If that file is missing, visit this page, select all, save it into a notepad text file named GPUs.txt and place it in the %AppData%\FAHClient directory (Windows + R to open Run prompt, type that directory in for quick access). GPUs.txt page: https://apps.foldingathome.org/GPUs.txt Hopefully this works, if not, let me know. I'll try to troubleshoot more with you. 0 · Share on FacebookShare on Twitter JADO ✭ April 20 edited April 20 Thanks for the help.  I am pretty knowledgeable on this stuff and at this point I am guessing it a Windows issue....but, I have no way to know.  I have tried to add them manually but since FAH sees no GPU's the add disappears as soon as I exit and go back to the settings sheet.  I have also looked at the GPUs.txt file and it is where it is supposed to be  and again everything worked correctly for over 2 weeks.  The cards have two bios's on them. You can select them with a switch.  one was modified for crypto mining the other is stock..  I was using the stock bios and everything worked fine.  I switched to crypto bios (to see if I could improve speed) and everything still worked but it was not stable.  So, I switched back to standard bios which had been working and after the switch back Folding stopped finding the cards.  Again, they show up in device manager and it reports they are working normally.  When it stopped was when I started uninstalling and installing card drivers and FAH in different combinations but have not been able to get them to reconnect.. 0 · Share on FacebookShare on Twitter JADO ✭ April 20 Thanks for helping.  I installed 7.6.9 today and I was able to manually add the GPU's.  Problem seems to be solved for now.  Thanks again. 0 · Share on FacebookShare on Twitter TSMichaelB admin April 20 Interesting that it only started after swapping to and from the VBIOS using the physical toggle switch. When you nuked the GPU drivers, did you use DDU (Display Driver Uninstaller)? Just wanting to make sure every registry entry tied to those drivers were removed prior to reinstallation. Can you provide the name of the exact model of RX 580 you're using? I'll see if I have any lying around that I can try to replicate the issue with.  0 · Share on FacebookShare on Twitter JADO ✭ April 20 edited April 20 Actually, I don't think the VBIOS had anything to do with it.  I think it related to the latest FAH updates.. but again I am not sure.  I did use DDU (full discosure..I did not run it in Safe Mode) then I used Regedit and deleted all remnants of FAH I could find.  Still don't know why it would not find the cards after that  but after installing 7.6.9 today I was able to find and add them manually.  With 6 RX580s and a i5 9600K 6 core processor should I have any problems running all 6 cards?  Can I also safely use some of 6 cpu cores in addition to the GPU's?  Adding cards manually, FAH also added my Intel 630 motherboard graphics  GPU for processing.  I removed it because I figured that would just cause problems.  I guess what I am asking is with the hardware I have what do thin the optimal folding configuration for folding should be here?  Thanks  0 · Share on FacebookShare on Twitter TSMichaelB admin April 20 Glad to hear the GPU's are recognized now. As for the hardware configuration, [email protected] recommends leaving one processing core per GPU. Since your 9600k has exactly 6 cores, I wouldn't recommend folding on the CPU at all as it will be of very little gain and may be detrimental to your GPU's scores, which are weighted far more heavily in terms of value. I don't see any issue running the Intel iGPU as it simply uses 2MB of cache and some spare system memory, so it shouldn't impact your stability at all. It might not score all that well, but it shouldn't hurt anything either.  0 · Share on FacebookShare on Twitter JADO ✭ April 20 My thoughts exactly.  Thank you for confirming.  Appreciate the help. 0 · Share on FacebookShare on Twitter TSMichaelB admin April 20 My pleasure. Thank you for dedicating your time and system resources for a good cause. If you need anything at all, let us know. 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article If I reserve something, will it get any discounts that may show up later before I pay? — Micro Center If I reserve something, will it get any discounts that may show up later before I pay? VenomousDemon ✭ November 24 in Customer Service Questions First off, does Microcenter participate in Cyber Monday? I am planning on getting a good deal on some parts for my new build and I wanna buy during Cyber Monday, assuming that prices will change somewhat.  So if they do participate, and I reserve today, will the prices change on the items I reserved if they get knocked down? Also, can I reserve an entire PC build, with all the parts, just to make sure I get all the parts I want? 0 · Share on FacebookShare on Twitter Comments LandShark admin November 24 Hey @VenomousDemon We've got some great sales currently and we do typically participate in Cyber Monday. I'm not sure if we'll have any crazy PC parts deals, but I'd imagine we'll have many sales. Reservations only last for 3 days, however, we do offer price protection on recent purchases. Black Friday Price Promise: Micro Center customers that purchase a qualifying item (products listed in our Black Friday promotions) between 11/02/20 - 11/30/20 and if the price of the qualifying item goes lower than your purchase price before November 30, 2020, we will refund you the difference between your purchase price and the lower price. Refunds must take place before 01/15/2021. Excludes products purchased with coupons, bundles, services, and price errors. All refunds will be based upon your original payment method. You're more than welcome to reserve the items that are currently available for reservation! They'll be held for you for up to 3 days in front of our store! Hope this helps! 0 · Share on FacebookShare on Twitter VenomousDemon ✭ November 24 LandShark said: Hey @VenomousDemon We've got some great sales currently and we do typically participate in Cyber Monday. I'm not sure if we'll have any crazy PC parts deals, but I'd imagine we'll have many sales. Reservations only last for 3 days, however, we do offer price protection on recent purchases. Black Friday Price Promise: Micro Center customers that purchase a qualifying item (products listed in our Black Friday promotions) between 11/02/20 - 11/30/20 and if the price of the qualifying item goes lower than your purchase price before November 30, 2020, we will refund you the difference between your purchase price and the lower price. Refunds must take place before 01/15/2021. Excludes products purchased with coupons, bundles, services, and price errors. All refunds will be based upon your original payment method. You're more than welcome to reserve the items that are currently available for reservation! They'll be held for you for up to 3 days in front of our store! Hope this helps! It may differ from store to store, but can I reserve my entire cart which would be my pc parts + the pro assembly? And still pick up the final build within the 3 days? 0 · Share on FacebookShare on Twitter LandShark admin November 24 If the order includes Pro Assembly, that would differ a bit. Since the reservation would actually be the purchase, our technicians would actually contact you once the build is ready for you to pick up! Any discounts would be taken off of the purchase total at that time! 1 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article Upgrading power supply — Micro Center Upgrading power supply Thor2219 ✭ September 18 in Help Choosing Parts I've got the hp compaq 8300 sff and would like to upgrade from the 240W power supply to something more powerful so I can then upgrade the graphics card so I can play fall guys! I'm struggling to find a more powerful power supply that is known to fit inside the hp sff chassis. Anyone know of some options? Thanks! 0 · Share on FacebookShare on Twitter Comments TSPhillipT admin September 18 Hello @Thor2219 After taking a look at this thread regarding this; https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Hp-Compaq-Elite-8300-SFF-psu-graphics-upgrade/td-p/5743592, it looks pretty specific for the power supply.  I recommend to consider a different option than upgrading the GPU and PSU as there are no PSUs that have the higher wattage and other sized PSUs that may fit inside will likely require some modding.   0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article I want a quote to repair a 2009 24" iMac — Micro Center I want a quote to repair a 2009 24" iMac FlacOrGtfo ✭ June 14 in Customer Service Questions Does MicroCenter repair Apple computers? If so, I believe my hard drive has failed. I get a white screen and loading never completes. How much would parts and labor be to replace the drive? 0 · Share on FacebookShare on Twitter Answers TSMikeW admin June 15 White screen of death. HDD is very likely and I can provide information on repair here, however we do not typically quote repair pricing in our forum. We would have  you visit service for an accurate estimate on that. As for the repair with an iMac there are two ways to go about this. The expensive method is to find an Apple OEM drive with the temp sensor pins. The inexpensive way is to buy any SATA drive off the shelf and install it. The problem this creates is the fans will run at 100% RPM and it's quite noisy. Simple solution, Mac's Fan Control: https://crystalidea.com/macs-fan-control There is a free version. Set your HDD fan RPM to about 50% and it'll run fine. 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article RTX 3000 Series Micro Center Discussion & FAQ! - Page 24 — Micro Center RTX 3000 Series Micro Center Discussion & FAQ! «1…21222324252627…56» Go Comments Jjacksterup ✭ September 17 Juliann6 said: Jjacksterup said: In NY, the flushing store has 12 cards and 12+ ppl are lined up. Was informed that the brooklyn site (current location) has no set card amount, there is 18+ of us here and we hope the have 20 cards or at least 12 ( I'm #15 wish me luck). Westbury is said to only have 2 cards with an early shipment of more, don't know how many are there other than 2+ ppl are already there. how do you know about the flushing location? I went there first and they said my best chance was at brooklyn, it's a 20min drive in the middle of the night with no traffic 0 · Share on FacebookShare on Twitter NYPC ✭ September 17 kishinfoulux said: Still nothing on Patterson?  One of the earlier pictures of people camping was the NJ location. You can tell by the lowes and gas station right across the street.  0 · Share on FacebookShare on Twitter AntzC ✭ September 17 kishinfoulux said: SuR_GalaHad said: Nafeasonto said: Well MicroCenter is pretty much a bust, I have a feeling BestBuy will be too.  best buys will get maybe 1 or 2 I was waiting in front of one in NJ and they came out and toldme to leave and come back at 630aam lol Where in NJ, if you don't mind my asking? Just got to the jersey microcenter at 1am i was already late 20 people here already more showing up now. Also despite being 20 in line I was like 24 or 25 because people kept showing up who were filling in next to their friends who were waiting in line. In my opinion not worth it there is talk the paterson location might get a restock mid day but I'm not waiting around for that chance. Even if everyone there was lying through there teeth that there wasn't 12 cards in total waiting number 25 is more then even projected amounts from official microcenter employees. 0 · Share on FacebookShare on Twitter NYPC ✭ September 17 Jjacksterup said: Juliann6 said: Jjacksterup said: In NY, the flushing store has 12 cards and 12+ ppl are lined up. Was informed that the brooklyn site (current location) has no set card amount, there is 18+ of us here and we hope the have 20 cards or at least 12 ( I'm #15 wish me luck). Westbury is said to only have 2 cards with an early shipment of more, don't know how many are there other than 2+ ppl are already there. how do you know about the flushing location? I went there first and they said my best chance was at brooklyn, it's a 20min drive in the middle of the night with no traffic I give it to people camping out. I would never camp outside overnight for a GPU. I am not too interested in the 3080.  3090s are my target cards. Still don't think I would wait overnight outside to get one. Thinking there may be less people out for that next week, but probably not.  0 · Share on FacebookShare on Twitter Jjacksterup ✭ September 17 It's seems like from reading all stores are saturated with people waiting for cards in stores but many stores are getting "early morning shipment". No facts just observation. Good luck to people waking up at 6 A.M. order online 0 · Share on FacebookShare on Twitter AntzC ✭ September 17 Felicity said: elcid_777 said: Why are the Tusitn people so fearful?? Ive seen pictures the previous two major launches when things were still normal and neither looked terribly bad. I do not expect a turn out like that for this release for a number of reasons. It's releasing during covid era. It's a workday, weekday.  It's a $800 gpu after tax. Will there be a line? Absolutely. But it isnt going to be like some are imagining. One thing thats increasing the anxiety is how poorly the retailers are handling updatea and information regarding the aystems theyll have in place. I am not camping out. Not showing up at midnight. There will be no need.  if i knew how many they were getting, i could compare it to how many people have stated interest in the thread, then extrapolate that out to the 13 million people within an hour/1.5 hour drive. I would say if you are heading towards irvine from any direction maybe avoid 7-8am driving since the 5 and 405 will be an absolute mess, I'm not gonna bother with midnight but prolly 6-7am if we get news 8-9am if we don't but i'll be checking periodically, I just don't like being unable to bayes' it out I wouldn't be so confident. Paterson new jersey aint the safest place to go to at 12am especially driving there with all the police in bergen or on the highway yet turnout was huge. If a ton of people were showing up pre 12am I can't imagine how busy Tustin might be in cali. 0 · Share on FacebookShare on Twitter Nafeasonto ✭ September 17 Wow this launch is absolute BS.  Sick of NVIDIA causing artificial scarcity. 1 · Share on FacebookShare on Twitter ChiefSuspect ✭ September 17 Does anyone have any idea when the second batch would be arriving after this? Or am I looking for a month or more wait if I miss the online window? 0 · Share on FacebookShare on Twitter Snewpy ✭ September 17 Jjacksterup said: In NY, the flushing store has 12 cards and 12+ ppl are lined up. Was informed that the brooklyn site (current location) has no set card amount, there is 18+ of us here and we hope the have 20 cards or at least 12 ( I'm #15 wish me luck). Westbury is said to only have 2 cards with an early shipment of more, don't know how many are there other than 2+ ppl are already there. Is it even worth it going to the Bk location at this point? 0 · Share on FacebookShare on Twitter SuR_GalaHad ✭ September 17 edited September 17 Welp if I dont get a 3080 today at least I successfully pre ordered a ps5 so I got at least 1 dub  0 · Share on FacebookShare on Twitter elcid_777 ✭ September 17 There will be second batches later the same day coming reddit, people who are there now. But probably not in all locations.  Anyone in Tustin know if there will be a second shippment tomorrow? Tustin is supposed to have the largest stock of 3080, so I wonder if more. What are my cha ces of getting one after 9am? 0 · Share on FacebookShare on Twitter Trippydagawd ✭ September 17 Anybody know what’s going on in Bridgeton st.louis??? 0 · Share on FacebookShare on Twitter Jjacksterup ✭ September 17 edited September 17 . 0 · Share on FacebookShare on Twitter Jjacksterup ✭ September 17 edited September 17 No, @Snewpy edit: sorry messing up the post I am tired 0 · Share on FacebookShare on Twitter Daviid ✭ September 17 edited September 17 elcid_777 said: There will be second batches later the same day coming reddit, people who are there now. But probably not in all locations.  Anyone in Tustin know if there will be a second shippment tomorrow? Tustin is supposed to have the largest stock of 3080, so I wonder if more. What are my cha ces of getting one after 9am? There’s 85 cards here but there’s a list of people already and there’s some waiting on the waitlist. Might have a second batch in the morning but highly doubt it due to Tustin having so much stock. 0 · Share on FacebookShare on Twitter Snewpy ✭ September 17 Jjacksterup said: No, @Snewpy edit: sorry messing up the post I am tired Is there even more people now? 0 · Share on FacebookShare on Twitter NarumiHayaashi ✭ September 17 Catdag123 said: Anyone got a update on Tustin, is it even worth trying to come now or will it most likely be too late? It is too late. The 85 that the store has have been claimed by the list. There is a wait list and at last roll call 6 people got onto the list. This will be 3rd roll call at 2am and if people are there for the 1st 2 your chances are slim. 0 · Share on FacebookShare on Twitter NarumiHayaashi ✭ September 17 TakitoBandit said: Catdag123 said: Anyone got a update on Tustin, is it even worth trying to come now or will it most likely be too late? I just drove by, there’s a ton of people outside, don’t bother. Heard they only have 10. Please read one or 2 pages back and look at the facts posted. Tustin has 85, posted by the store itself. As proof, a picture. 0 · Share on FacebookShare on Twitter JerseyXS97 ✭ September 17 edited September 17 Just looked at the Denver store out of curiosity. The line wasn't crazy long (About 15 vehicles) but it was also 11pm that I checked it. I'm going for the 3090 next week so I should probably get there even earlier. Probably will before the stores closes. I can work remotely so I've got that going at least. Just grab a comfy chair, a warm jacket, my laptop, and a controller and I'll be set~ 0 · Share on FacebookShare on Twitter kishinfoulux ✭ September 17 So I'm at a Best Buy in Jersey and I don't see any signs or anything. Dead quiet. No idea if it's even worth waiting for them to open honestly but I don't really have any other options. If I'm lucky someone will show up early and I can ask them. 1 · Share on FacebookShare on Twitter chaosrealms ✭ September 17 flushing is full i went earlier 0 · Share on FacebookShare on Twitter ironxlungs85 ✭ September 17 At microcenter in Mayfield heights. About 15 ppl in line. No word on how many cards they are expecting.  0 · Share on FacebookShare on Twitter Shibumi ✭ September 17 Trippydagawd said: Anybody know what’s going on in Bridgeton st.louis??? I’m currently in line at The Bridgeton store. We were told by the manager that they have 12 cards (10 EVGA, 2 Msi), with 5 more Msi cards scheduled for delivery at an unknown time. They’re going to give out vouchers for the 12 cards they have in stock at 7am. There’s currently about 17 people in line.  0 · Share on FacebookShare on Twitter Juliann6 ✭ September 17 how can a store in a the queens borough in New York City only have 13 cards? Shouldn't there be more common sense to that? 0 · Share on FacebookShare on Twitter Chapelte ✭ September 17 What’s it look like at the Westmont location. Just got out of work and I’m debating wether or not to head out there. 0 · Share on FacebookShare on Twitter Necro ✭ September 17 edited September 17 For Tustin, are they doing roll call for those on the 85 like those on the waitlist? Or are they just permanently on the list?  0 · Share on FacebookShare on Twitter Leo_U ✭ September 17 Chapelte said: What’s it look like at the Westmont location. Just got out of work and I’m debating wether or not to head out there. Line of maybe about 25 or so. sign at front door doesn’t say a specific amount of cards available,  0 · Share on FacebookShare on Twitter Lilroyrmx ✭ September 17 any updates on westbury long island? 0 · Share on FacebookShare on Twitter asd6789 ✭ September 17 Necro said: For Tustin, are they doing roll call for those on the 85 like those on the waitlist? Or are they just permanently on the list?  Tustin roll call has been as stringent for normal 85-list as wait-list. 0 · Share on FacebookShare on Twitter azasadny ✭ September 17 Does anyone know how many are in line at the Madison Heights, MI location? Thanks in advance! 0 · Share on FacebookShare on Twitter «1…21222324252627…56» Go Sign In or Register to comment. Community Article AMD Zen 3/Ryzen 5000 Series Launch Discussion - Page 24 — Micro Center AMD Zen 3/Ryzen 5000 Series Launch Discussion «1…20212223242526» Go Comments eaglep91 ✭ November 13 Stepbrother said: Any word? bad_with_money said: Anybody have more information about the 5900x at Rockville, MD? I was 17th in line on release day and guy #16 was the last person to get one. I have heard that truck day is Tuesday, so I'm planing on getting there about 5am. Can anybody speak to getting more in tomorrow? Can't expect that I saw someone here also in Rockville, lol. I just heard there might be something tomorrow but can't get any confirmation. It's too late to call or visit, not sure to go or not. 0 · Share on FacebookShare on Twitter T_C ✭ November 13 T_C said: Have we received any clarification on the meaning of "Limited Availability"?  I understand it was escalated to the web team via TSTonyV on 6 November.  I am viewing this on a desktop on Chrome so it isn't the previously mentioned "mobile only" issue.  When viewing all products (including out of stock) I clearly see SKUs with inventory numbers, listed as "sold out" and 5000 series listed as "limited availability".   Just following up on this. 0 · Share on FacebookShare on Twitter T_C ✭ November 13 edited November 13 bogee said: Does $20 off motherboard with CPU valid for open box Motherboards? Can anyone tell?  No it is not.  I asked in store and was told the discount is included in the open box reduction (even though sometimes the deal is cheaper than the open box) 0 · Share on FacebookShare on Twitter T_C ✭ November 13 So according to Moore's Law is Dead, AMD plans on selling 1 million Zen3 chips this quarter.  Given the launch date, that is 500,000 a month between now and the end of the year.  Be patient, they are coming. 0 · Share on FacebookShare on Twitter A_niche ✭ November 13 It seems MC in Cambridge,MA had 30 5600Xs today. No 5950X Don't know if they went through the 5600X stock yet 1 · Share on FacebookShare on Twitter Verbalkintify ✭ November 13 Anyone know anything of the St Louis Park 5600x stock? 0 · Share on FacebookShare on Twitter Dethy ✭ November 13 T_C said: So according to Moore's Law is Dead, AMD plans on selling 1 million Zen3 chips this quarter.  Given the launch date, that is 500,000 a month between now and the end of the year.  Be patient, they are coming. Sauce? Also most of it will go to OEM's for their system rollouts. 0 · Share on FacebookShare on Twitter Wrokrn ✭ November 13 Anyone know if any stores in NY got stock today? 0 · Share on FacebookShare on Twitter Bradk0000674 ✭ November 13 DasNaaice2384 said: LandShark said: Hey @Joellybeans! Hmm, It's showing as sold out for me. I can confirm that Tustin is sold out of the new 5800X and 5900X at this time. Lots of gpu stock today in CT figured there would be slim to none on the CPU frront but here's hoping later this week into next. Met alot of chill dudes today waiting to see what was on the truck. We all got nowinstock alerts at once for other stuff too hilarious moments. I live in Connecticut. Where are you looking for stock? I didn’t think there was a Microcenter in CT. Looking for a 5900X. Thought I was going to have to drive to NJ  0 · Share on FacebookShare on Twitter Eric2 ✭ November 13 Does micro center receive shipment during the weekend ? Or should I just wait for like another 2 weeeks for stock to be stable ? 0 · Share on FacebookShare on Twitter Michael_G ✭ November 13 Does anyone know if Fairfax has any 5600x stock? 0 · Share on FacebookShare on Twitter jphila ✭ November 13 Anyone know about stock at the St Davids/PA store? 0 · Share on FacebookShare on Twitter Ked ✭ November 13 Anyone know anything about the Sterling Heights MC getting any 5950 tomorrow? I live a hour away and work before they open on the weekdays so I can’t drive out to see if they have any stock or not. 0 · Share on FacebookShare on Twitter RRV43 ✭ November 13 Did Tustin location ever get 5900x stock?? 0 · Share on FacebookShare on Twitter mlambert890 ✭ November 13 If it is true that AMD thinks they’re going to ship 1M units in Q4, guaranteed that is 90% low end SKUs based on patterns we’re already seeing. The 5600/5800 and the 5900/5950 exist in different realities.  The former providing AMD plausible deniability so the faithful can claim “not a paper launch!!!” even as the latter, which are the parts that created the hype, fail to show in any significant volume outside of eBay before 2021 1 · Share on FacebookShare on Twitter Joellybeans ✭ November 13 T_C said: So according to Moore's Law is Dead, AMD plans on selling 1 million Zen3 chips this quarter.  Given the launch date, that is 500,000 a month between now and the end of the year.  Be patient, they are coming. Well that's good to know, my computer is practically built. I'm just waiting on a CPU and a Graphics Card. I don't plan on camping out... ever... and I am in no rush. Hopefully get both before summer of 2021 0 · Share on FacebookShare on Twitter BlueHawk0172 ✭ November 14 edited November 14 Michael_G said: Does anyone know if Fairfax has any 5600x stock? I was there this morning for opening and they didn't have anything in stock. Got placed on the waitlist for the day didn't get a text.. - I was about 12th-15th in line, looking to get a 5900X.  1 · Share on FacebookShare on Twitter BlueHawk0172 ✭ November 14 edited November 14 Going to Rockville tomorrow to pick up my motherboard and some other things, who's coming out for a party?    Of course I'm hoping for a 5900X to go with it... lol  0 · Share on FacebookShare on Twitter AaronJB ✭ November 14 Does anyone know if Microcenter stores around the country have been getting shipments of Zen 3s in since launch day? I assume if they have been getting them in that the quantities are likely small. Just curious. Online vedor stock seems to be non-exsistant.  1 · Share on FacebookShare on Twitter Benito ✭ November 14 I’m in will be there around 8:30AM hoping they have a 5600x 1 · Share on FacebookShare on Twitter Eric2 ✭ November 14 Benito said: I’m in will be there around 8:30AM hoping they have a 5600x @Benito I was there today (Friday) around 9 and when I got there we all made a line in the back and then they asked us what we came for , a guy in line said he wanted 5950x but then the store manager (i think) said that there were people from 6am on a waiting list already claiming the spot for those cpu . There were about 15 people at 6 am . So i would suggest you get up a little earlier .  0 · Share on FacebookShare on Twitter OneLuckyWolf ✭ November 14 Honest question: If you could get the i9-10850k for the same price as a 5600x, would you still wait for the 5600x stock or "settle" for the i9? I'm starting to wonder if this is worth the hassle for a new build... 0 · Share on FacebookShare on Twitter thesandbox ✭ November 14 Picked up a 5950x at Westbury NY store Thursday morning at open.  There were about a dozen of us waiting in line and when they opened they said they got 5950x's and 5600x' in that morning.  Not sure how many were left but those of us hoping for a 5900x I think bit the bullet and grabbed the 5950x. 0 · Share on FacebookShare on Twitter A_niche ✭ November 14 Wow you got really lucky with the 5950x! I wish I could get my hands on one 1 · Share on FacebookShare on Twitter BlueHawk0172 ✭ November 14 UPDATE ON FAIRFAX AND ROCKVILLE  I got to Rockville about half an hour after they opened, missed my exit and breakfast went longer than expected.. - Ted's Bulletin in Downtown Crown of Gaithersburg btw, HIGHLY RECOMMEND! Anyways..  First time at Rockvilles MC so I was a little lost the whole time and forgot to look for a QR code to scan to get your place in line.. But I figured at 9:30 it was already too late for that anyways... I went to the BYOPC area asked if they had any in stock for shits and giggles, the guy said he doesn't think they've had a shipment in since initial release date. Picked up my Crosshair VII Formula, RAM, and an SSD and went on my way. I also got a text from Fairfax location also texted me saying "todays shipments have come and gone with no GPU's or AMD CPU's this morning. Next best chance would be Tuesday" So I'll swing by there after work on Tuesday and hope for the best...  GOODLUCK TO YOU ALL   TLDR - Fairfax: NONE - line up Tuesday Rockville: NONE (since release?) 0 · Share on FacebookShare on Twitter Benito ✭ November 14 Rockville had CPUs yesterday which sucks because I was working that morning so I couldn’t go.  1 · Share on FacebookShare on Twitter WTFPCStuff Southern California ✭ November 14 Joellybeans said: T_C said: So according to Moore's Law is Dead, AMD plans on selling 1 million Zen3 chips this quarter.  Given the launch date, that is 500,000 a month between now and the end of the year.  Be patient, they are coming. Well that's good to know, my computer is practically built. I'm just waiting on a CPU and a Graphics Card. I don't plan on camping out... ever... and I am in no rush. Hopefully get both before summer of 2021 I can confirm the MLiD story, and his leaks have been pretty accurate. I'm in the same boat. I'm more looking to upgrade for future proofing and sit on a build for a long time, but my current build is fine. I'm not planning to camp, just watching for stock to go stable and hopefully a better motherboard combo discount in the coming month as is historically typical. 0 · Share on FacebookShare on Twitter AlphaOmega ✭ November 15 edited November 15 RRV43 said: Did Tustin location ever get 5900x stock?? Tustin received Ryzen 5000 series stock last Monday from what we were told. I went early Friday morning after work around 6am and was the 25th person in line but they never received any. There were 2 3090s and about 10 3070s, and the next possible shipment is this upcoming Monday(11/16). I'm planning on going back again after work on Monday but I'm losing hope. Might just settle for a 3900x at this point... 0 · Share on FacebookShare on Twitter Benito ✭ November 15 3900x is a great cpu  0 · Share on FacebookShare on Twitter Jason01 ✭ November 15 AlphaOmega said: RRV43 said: Did Tustin location ever get 5900x stock?? Tustin received Ryzen 5000 series stock last Monday from what we were told. I went early Friday morning after work around 6am and was the 25th person in line but they never received any. There were 2 3090s and about 10 3070s, and the next possible shipment is this upcoming Monday(11/16). I'm planning on going back again after work on Monday but I'm losing hope. Might just settle for a 3900x at this point... Wait you're saying you waited at 6AM when it opens at 9AM and you were the 25th in line? What on earth... 0 · Share on FacebookShare on Twitter «1…20212223242526» Go Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article Need Help Choosing Parts — Micro Center Need Help Choosing Parts miguel274769 ✭ August 28 in Help Choosing Parts I put this parts list together and am looking for some advice. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=6c3bcb58-eb97-4f5b-9400-f876edc8995e 0 · Share on FacebookShare on Twitter «1234» Go Comments Ian admin August 28 Greetings. What is the intended use of the PC and your overall budget?  0 · Share on FacebookShare on Twitter miguel274769 ✭ August 28 gaming and streaming 2000 may go a bit over if needed and the streaming isnt like a big thing its little might not stream alot but i am going to stream 0 · Share on FacebookShare on Twitter TSTonyV admin August 28 At this budget there's definitely some things I'd change because we've got some mis-matches on performance that we want to avoid. The biggest one being the case, we can easily go with something quite a bit cheaper and get a much better GPU, we can also go with a cheaper CPU/motherboard combo while still preserving your gaming performance. I would also definitely upgrade the power supply at this budget, a 450W leaves basically no room leftover especially if you planned on upgrading in the future. This is probably what I'd do: https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=a3c352a6-c0d9-4e4c-8c3d-c4aa2de158bd I opted for the 3700X instead of the 3900X for your CPU. It's basically the same gaming performance, while still being very good for streaming if you choose to go that route. Alternatively you could go with the Intel i5-10600k which will be the best all-around gaming CPU at that price and outperform the 3700X and 3900X in games by a decent bit, while still also being good for streaming.  0 · Share on FacebookShare on Twitter miguel274769 ✭ August 29 what if i get a i7 not a i5 0 · Share on FacebookShare on Twitter miguel274769 ✭ August 29 https://www.microcenter.com/site/content/custom-pc-builder.aspx i really like this build  would this be good enough to game and stream  0 · Share on FacebookShare on Twitter miguel274769 ✭ August 29 i mean i can change the case but can it be a midtower  so when i change the case i can get a 2070 gpu instead of a 2060 also i can get a i7 or is a i5 better but my friend says the 3900x is good also budget is 2k 0 · Share on FacebookShare on Twitter Ian admin August 29 miguel274769 said: https://www.microcenter.com/site/content/custom-pc-builder.aspx i really like this build  would this be good enough to game and stream  Greetings. The link provided is just to our custom build website, not a parts list. To share what you have picked out so it can be looked over, please use the link from the right side of the page under "Share"  0 · Share on FacebookShare on Twitter miguel274769 ✭ August 29 here try this https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=86ced4db-c337-4a31-872e-7cc867245635 0 · Share on FacebookShare on Twitter miguel274769 ✭ August 29 try this as well would this be good https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=9629919e-c54f-4a4f-bcd9-2dd2ba8e2a0e 0 · Share on FacebookShare on Twitter Ian admin August 29 miguel274769 said: try this as well would this be good https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=9629919e-c54f-4a4f-bcd9-2dd2ba8e2a0e This is the best for the price of what you have linked but you will still need a case for this build.  0 · Share on FacebookShare on Twitter miguel274769 ✭ August 30 can you recommend a mid case airflow case with 2 front fans and 1 back fan price can be anywhere from 0-180 0 · Share on FacebookShare on Twitter miguel274769 ✭ August 30 or 200 0 · Share on FacebookShare on Twitter Ian admin August 31 I'd look at something like https://www.microcenter.com/product/609991/corsair-275r-airflow-tempered-glass-atx-mid-tower-computer-case---black which fits your description perfectly. It is well reviewed and has plenty of room for everything. 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 1 would you say this has good airflow and would cool my parts well and do you know how loud the case fans are  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 1 how many usb ports does it have  does it have usb ports in the back not just the top  0 · Share on FacebookShare on Twitter TSTonyV admin September 1 USB ports on the back are attached to your motherboard, not the case. Airflow should be good, though I don't know how loud the fans will get at stock settings.  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 2 ok the motherbored im getting how many usb ports will there be  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 2 and what fans do you reccomend that are not completly quiet but not to loud  and how many fans can this case hold  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 and are the fans rgb or not its fine if there not i just want to know so i dont get other rgb or non rgb fans  and hat case fans do you reccomend the mount i will get is based on haw many fit on the case  and whats the diffrence between a radiotor and a fan  0 · Share on FacebookShare on Twitter TSTonyV admin September 3 A lot of the information you're asking for can be found on the spec sheets for the products you're looking at or on the manufacturer's product page. That X570 Aorus Pro motherboard has 10 USB ports in total: 4x USB 2.0 Type A, 5x USB 3.1 Type-A and one USB 3.1 Type-C. The Corsair 275R case can support a 120mm fan on the back, two 120mm fans on the top, and up to three 120mm fans or two 140mm fans on the front. The ones that come with the case are not RGB.  As for extra fans, the Corsair ML120 fans are a good choice, as well as Noctua fans.  Radiators are part of liquid-cooling setups. Fans attach radiators to diffuse heat absorbed by the liquid so it can cool your CPU.   0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 so i dont need radiators  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 and your sure it comes with three stock fans becasue i saw somewhere it only came with 2 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 and what would be a good rgb strip i can put inside the case to add a little lighting to the case 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 Side Diffused LEDs Strip for LANCOOL II is this a good rgb strip i can get and if it is for the case i am getting would this be enough or do i need to get 2 of them  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 and just to make things clear with the motherbored when evreything is built i will have 10 usb ports on the back of my case to plug in items and also does this have an ethernet plug in and does it have an hdmi if so how many  0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 or is this lighting beter  HUE 2 RGB LED 24-Pin and 8-Pin Cable Comb 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 3 or ASUS ROG Addressable LED 0 · Share on FacebookShare on Twitter TSPhillipT admin September 3 edited September 3 If you are going with that Corsair Case, I highly recommend going with the Corsair LED Strips.  They come with the Corsair Lightning Node Pro.   The case does have two fans in the front and one in the back, https://www.corsair.com/us/en/Categories/Products/Cases/Mid-Tower-ATX-Cases/275R-Airflow-Tempered-Glass-Mid-Tower-Gaming-Case/p/CC-9011181-WW 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 4 and my question before that is there hdmi if so how many and is there a way to plug in etheret cord 0 · Share on FacebookShare on Twitter miguel274769 ✭ September 4 ima get 2 more extra fans is this good ima put them on top  ML120 Magnetic Levitation 120mm Case Fan and the rgb you recomended to me i would not be able to get unless i figure something out becuase it goes over my budget are theses fine asus  ROG Addressable RGB 30cm LED Lighting Strip 0 · Share on FacebookShare on Twitter «1234» Go Sign In or Register to comment. Community Article NVIDIA 3000 Series Launch & Micro Center FAQ! - Page 11 — Micro Center NVIDIA 3000 Series Launch & Micro Center FAQ! «1…891011121314…18» Go Comments NIGH7MVRE ✭ September 23 edited September 23 June007 said: @NIGH7MVRE Can you pls send pics for proof? was planning to go there to check too but maybe not anymore. Did you get to be one of the lucky 15? If so congrats I wasn’t lucky🙁 1 · Share on FacebookShare on Twitter June007 ✭ September 23 @NIGH7MVRE daaamn that many already, thanks for saving me the trip though appreciate it! best of luck to us in getting one someday 0 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 23 Walmart is selling rtx 3090 for 1,000 bucks more than what it's worth...right now. Looks like scalping has already started. I wonder how many months it'll be before I can actually get a 3090.  Here's the link to those who are dumb enough to pay an extra 1000 bucks than the original price of the 3090fe.  0 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 23 looking4a3090fe said: Walmart is selling rtx 3090 for 1,000 bucks more than what it's worth...right now. Looks like scalping has already started. I wonder how many months it'll be before I can actually get a 3090.  Here's the link to those who are dumb enough to pay an extra 1000 bucks than the original price of the 3090fe.  For the record, I made this post on October 23rd, at 6:18pm eastern standard time. How can walmart be selling something that's not supposed to be released until tomorrow? I'd get it if it wasn't overpriced by a thousand freaking dollars.  0 · Share on FacebookShare on Twitter troy ✭ September 23 12 confirmed in denver, im number 13 in line dammit  0 · Share on FacebookShare on Twitter Pumpkeymumpkey CA ✭ September 23 Lucy said: Sharonville update ? We were there a few hours ago, already looked like way more people than whatever will be available. We've tried all Ohio stores now, guess we're outta luck. Should've gone this morning, we just had no idea people would line up so early! 0 · Share on FacebookShare on Twitter Greyhound ✭ September 24 So will there be a restock of any 3080 AIB cards at select microcenter locations stemming from the launch of the 3090? 0 · Share on FacebookShare on Twitter EvanH ✭ September 24 edited September 24 https://www.walmart.com/ip/NVIDIA-GeForce-RTX-3090-24GB-GDDR6X-PCI-Express-4-0-Graphics-Card/966958190 can buy a 3090 right now. Even walmart getting in on the scalping game.  0 · Share on FacebookShare on Twitter NIGH7MVRE ✭ September 24 NY - Flushing and Westbury update? 0 · Share on FacebookShare on Twitter molarry ✭ September 24 According to the dude who's been there since 3AM Wednesday morning @ the flushing location there's 7-8 people in line as of an hour ago. With only 2 confirmed ASUS cards. his words not mine "i seen a box of 10 evga cards come off a truck and all the store employee's confirmed they were getting sent back to EVGA".  Don't know why EVGA would be recalling cards.  0 · Share on FacebookShare on Twitter freakore ✭ September 24 any Sharonville OH updates? We are coming from Indiana and it is 2 hour drive for us. Wanted to know if there are already enough people to empty out the shelves. Did they already give out vouchers? 0 · Share on FacebookShare on Twitter Tiernan ✭ September 24 @freakore there's like 20+ people on line and only 10 cards I'm number 13 hoping for more cards in the morning  0 · Share on FacebookShare on Twitter freakore ✭ September 24 Tiernan said: @freakore there's like 20+ people on line and only 10 cards I'm number 13 hoping for more cards in the morning  Thanks so much you saved my 14hours. Good luck and be safe bud 0 · Share on FacebookShare on Twitter Drackonos ✭ September 24 Anyone have eyes on the Columbus OH store? 0 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 24 Ok, I'm not seeing anything available on amazon, before 11:59am and at 12:01. WTF? 0 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 24 amazon, new egg, best buy, nothing available....all says coming soon.  0 · Share on FacebookShare on Twitter Salty_Bananas ✭ September 24 Refresh @ 9am est.  0 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 24 Salty_Bananas said: Refresh @ 9am est.  ok, thanks! I'm curious, how did you find out when to start hitting the refresh button on this? I've been googling for days trying to figure out "what time" to start shopping for the 3090 and the only answers I got is that some 3090s are pushed back to October and some are still being released today, but not what time. I'd like to know what I've been doing wrong. 0 · Share on FacebookShare on Twitter gardotd426 ✭ September 24 looking4a3090fe said: Salty_Bananas said: Refresh @ 9am est.  ok, thanks! I'm curious, how did you find out when to start hitting the refresh button on this? I've been googling for days trying to figure out "what time" to start shopping for the 3090 and the only answers I got is that some 3090s are pushed back to October and some are still being released today, but not what time. I'd like to know what I've been doing wrong. Nvidia announces it. I got an email earlier from them too.  0 · Share on FacebookShare on Twitter Tiernan ✭ September 24 Can I get a roll call on how many cards are at what stores as of now? I'm at Sharronville microcenter and there's 10 cards as of right now, I'm #13 in line, waiting to see what will happen 0 · Share on FacebookShare on Twitter Chopreme ✭ September 24 Anybody know how long the lines are at Paterson NJ? 0 · Share on FacebookShare on Twitter Nation ✭ September 24 At the Westmont IL store 3 Asus cards available 8 EVGA cards sent back for some reason and I’m number 5.. 0 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ September 24 Good vibes from Mayfield! Many people in line having a good time. 1 · Share on FacebookShare on Twitter looking4a3090fe ✭ September 24 Well, it's another failed launch. Bestbuy won't even load 3090 search results, Amazon still saying unavailable, newegg still saying out of stock, and thank GAWD cuz I just watched the 7th review video of 3090 vs 3080 and it turns out I really need a 3080 because I just want to game in 4k, and the 3090 is only 10-15% faster than 3080. So it looks like I'm gonna refuse to buy a 3090 for the same reasons I didn't get the 2080ti a year ago.  0 · Share on FacebookShare on Twitter chabz ✭ September 24 Is Micro Center trying to get FE cards? I am wondering if I can remove them from my list of pages to monitor since they still don't even have the 3080 or 3090 FE listed. 0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 Sooo.. I managed to get one in my cart on bestbuy and they are not letting me buy it.. but I am not letting it go.. lolol - this is dumb.  0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 Update, they have no forcably removed it from my cart 0 · Share on FacebookShare on Twitter NIGH7MVRE ✭ September 24 It's just stuck here 😣 0 · Share on FacebookShare on Twitter troy ✭ September 24 Once again failed online  0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 This pisses me off..... 0 · Share on FacebookShare on Twitter «1…891011121314…18» Go Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article Constant BSOD crashes across several games MicroElectronics G434 1.0 — Micro Center Constant BSOD crashes across several games MicroElectronics G434 1.0 Clay ✭ August 2 in Technical Support Questions MicroElectronics G434 1.0 i7-9700KF CPU @3.60GHz 32GB ram  Windows 10 Professional (x64) Version 1909 (build 18363.959) Board: ASRock Z390 Phantom Gaming 4S/ac GPU: NVIDIA GeForce RTX 2070 SUPER  GPU Driver: GeForce Game Ready Driver Ver. 451.67 Able to run: Dead by Daylight  Payday 2 Dark Souls 3 Occasional Crash: 7 days to die Killing Floor2 Terraria  Sea of Thieves  Crashes often (within 20-60min): Warhammer Vermintide II Escape from Tarkov No Mans Sky Witcher 3 Troubleshooting steps Updated GPU drivers Clean installed GPU drivers Updated bios completed memtest with 0 errors Ran a who crashed report which pointed at - nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 451.67 , NVIDIA Corporation)- As a likely issue. Searching for crash issues with that error brings a lot of results, most are irrelevant and the relevant forum posts don't end with resolution.  These crashing issues started shortly after purchasing this prebuilt. At first I thought it was maybe a driver incompatibility issue but after dealing with this continual problem of crashing across several different games for months. All drivers have been updated and checked several times. I'm not sure what to check next.  -------------------------------------------------------------------------------- Welcome to WhoCrashed (HOME EDITION) v 6.65 -------------------------------------------------------------------------------- This program checks for drivers which have been crashing your computer. If your computer has displayed a blue (or black) screen of death, suddenly rebooted or shut down then this program might help you find the root cause of the problem and a solution.  Whenever a computer suddenly reboots without displaying any notice or blue (or black) screen of death, the first thing that is often thought about is a hardware failure. In reality, on Windows a lot of system crashes are caused by malfunctioning device drivers and kernel modules. In case of a kernel error, many computers do not show a blue or black screen unless they are configured for this. Instead these systems suddenly reboot without any notice.  This program will analyze your crash dumps with the single click of a button. It will tell you what drivers are likely to be responsible for crashing your computer. It will report a conclusion which offers suggestions on how to proceed in any situation while the analysis report will display internet links which will help you further troubleshoot any detected problems.  To obtain technical support visit www.resplendence.com/support Click here to check if you have the latest version or if an update is available.  Just click the Analyze button for a comprehensible report ... -------------------------------------------------------------------------------- Home Edition Notice -------------------------------------------------------------------------------- This version of WhoCrashed is free for use at home only. If you would like to use this software at work or in a commercial environment you should get the professional edition of WhoCrashed which allows you to perform more thorough and detailed analysis. It also offers a range of additional features such as remote analysis on remote directories and remote computers on the network.  Please note that this version of WhoCrashed is not licensed for use by professional support engineers. Click here for more information on the professional edition. Click here to buy the the professional edition of WhoCrashed. -------------------------------------------------------------------------------- System Information (local) -------------------------------------------------------------------------------- Computer name: DESKTOP-H364Q4S Windows version: Windows 10 , 10.0, build: 18363 Windows dir: C:\windows Hardware: G434, MicroElectronics, ASRock, Z390 Phantom Gaming 4S/ac CPU: GenuineIntel Intel(R) Core(TM) i7-9700KF CPU @ 3.60GHz Intel8664, level: 6 8 logical processors, active mask: 255 RAM: 34272337920 bytes (31.9GB) -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dumps are enabled on your computer.  Crash dump directories:  C:\windows C:\windows\Minidump On Sun 8/2/2020 9:44:27 AM your computer crashed or a problem was reported crash dump file: C:\windows\Minidump\080220-6640-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C23C0)  Bugcheck code: 0x50 (0xFFFFA8002F3C2D10, 0x0, 0xFFFFF807752CB076, 0x2) Error: PAGE_FAULT_IN_NONPAGED_AREA file path: C:\windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that invalid system memory has been referenced.  This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  On Sun 8/2/2020 9:44:27 AM your computer crashed or a problem was reported crash dump file: C:\windows\MEMORY.DMP This was probably caused by the following module: ntkrnlmp.exe (nt!memset+0x17A8A)  Bugcheck code: 0x50 (0xFFFFA8002F3C2D10, 0x0, 0xFFFFF807752CB076, 0x2) Error: PAGE_FAULT_IN_NONPAGED_AREA Bug check description: This indicates that invalid system memory has been referenced.  This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  On Sun 8/2/2020 8:10:45 AM your computer crashed or a problem was reported crash dump file: C:\windows\Minidump\080220-8218-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C23C0)  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8057A607993, 0xFFFFE482474A6E10, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.  This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.  On Sat 8/1/2020 11:00:36 PM your computer crashed or a problem was reported crash dump file: C:\windows\Minidump\080120-8078-01.dmp This was probably caused by the following module: fltmgr.sys (0xFFFFF8030C53DDE9)  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8030C53DDE9, 0xFFFFAE881E95E5B0, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\windows\system32\drivers\fltmgr.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: Microsoft Filesystem Filter Manager Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.  This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK. On Wed 7/29/2020 11:42:13 PM your computer crashed or a problem was reported crash dump file: C:\windows\Minidump\072920-8218-01.dmp This was probably caused by the following module: nvlddmkm.sys (0xFFFFF801704FABCD)  Bugcheck code: 0xD1 (0x2600, 0x2, 0x1, 0xFFFFF801704FABCD) Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL file path: C:\windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_edab19158bdd0d0a\nvlddmkm.sys product: NVIDIA Windows Kernel Mode Driver, Version 451.67  company: NVIDIA Corporation description: NVIDIA Windows Kernel Mode Driver, Version 451.67  Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.  This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out.  A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 451.67 , NVIDIA Corporation).  Google query: nvlddmkm.sys NVIDIA Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL On Tue 7/28/2020 7:41:16 AM your computer crashed or a problem was reported crash dump file: C:\windows\Minidump\072820-7359-01.dmp This was probably caused by the following module: dxgkrnl.sys (0xFFFFF80556703106)  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80556703106, 0xFFFFE98B1F20E3A0, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\windows\system32\drivers\dxgkrnl.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: DirectX Graphics Kernel Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.  This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.  The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.  -------------------------------------------------------------------------------- Conclusion -------------------------------------------------------------------------------- 6 crash dumps have been found and analyzed. A third party driver has been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:  nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 451.67 , NVIDIA Corporation) If no updates for these drivers are available, try searching with Google on the names of these drivers in combination with the errors that have been reported for these drivers. Include the brand and model name of your computer as well in the query. This often yields interesting results from discussions on the web by users who have been experiencing similar problems. Read the topic general suggestions for troubleshooting system crashes for more information.  Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.  0 · Share on FacebookShare on Twitter Comments TSMikeW admin August 2 Greetings, System is unstable, and it's likely due to the RAM. Please go into your BIOS and under the OC Tweaker tab lower the memory frequency from 3600 to 3200. Save and exit, then test the system normally and verify it's stable. 0 · Share on FacebookShare on Twitter Clay ✭ August 3 Greetings,  Thank you TSMike you are an IT god. No more crashes! 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article AMD Zen 3/Ryzen 5000 Series Launch Discussion - Page 13 — Micro Center AMD Zen 3/Ryzen 5000 Series Launch Discussion «1…10111213141516…26» Go Comments Xkix ✭ November 5 @mrdoubtfull thanks for all the updates I’m in line now  0 · Share on FacebookShare on Twitter gokitty199 ✭ November 5 Update for Fairfax, 22 people in line currently.  0 · Share on FacebookShare on Twitter Shadow70_ ✭ November 5 The 5900X has suddenly been removed from the Dallas location website at 8:00 PM central time.   I confirmed just an hour or so ago that they did have stock but not how many.   Any reason why they would have removed it?   I don't want to make the drive and sit all night if they had 4 or 5 and somehow they are already gone pre release.  Thoughts???   Anyone already over at the location off Central Express way in Dallas??  Thanks in advance. 0 · Share on FacebookShare on Twitter ZestyLyme ✭ November 5 Does anyone know if the 5000 series will be able to be bundled with motherboards for $20 off? Also, does anyone have an update for Rockville? 0 · Share on FacebookShare on Twitter PrestonYoungsley ✭ November 5 Whats breakdown of chips wanted out of the 22 @ fairfax, I'll probably just roll up in the AM, all i want is a measly 5600x 0 · Share on FacebookShare on Twitter Serpo33 ✭ November 5 Excepting 5 5950x 0 · Share on FacebookShare on Twitter LambChop69 ✭ November 5 Anyone at Overland Park KS location? I know when I was there today at 5, there was a kid already there stating he was camping out. 0 · Share on FacebookShare on Twitter yttriumtyclief ✭ November 5 5900X listing is missing from the Paterson site as well. My guess is it's just a website thing, I would doubt they'd talk about having dozens of them and then suddenly not have them anymore. 0 · Share on FacebookShare on Twitter cool2562 ✭ November 5 how many in line at Patterson NJ? Trying to get a 5900 or 5950x. 0 · Share on FacebookShare on Twitter q1q1q1 ✭ November 5 All Zen 3 CPUs got removed from the web store for Tustin 0 · Share on FacebookShare on Twitter AARGH ✭ November 5 PrestonYoungsley said: Whats breakdown of chips wanted out of the 22 @ fairfax, I'll probably just roll up in the AM, all i want is a measly 5600x #   Type 08 5950 13 5900 01 5800 01 5600 and 3 for 3080 cards just in case 0 · Share on FacebookShare on Twitter Shadow70_ ✭ November 5 edited November 5 Trying to reach associate at Dallas location for update but they appear to have gone dark at 9PM central. 0 · Share on FacebookShare on Twitter PrestonYoungsley ✭ November 5 Thanks, I'll def just catch some ZzZ's then.  0 · Share on FacebookShare on Twitter CrispyBudder ✭ November 5 Shadow70_ said: The 5900X has suddenly been removed from the Dallas location website at 8:00 PM central time.   I confirmed just an hour or so ago that they did have stock but not how many.   Any reason why they would have removed it?   I don't want to make the drive and sit all night if they had 4 or 5 and somehow they are already gone pre release.  Thoughts???   Anyone already over at the location off Central Express way in Dallas??  Thanks in advance. All of the zen 3 CPUs got removed from the website. They probably gonna put it back up in the morning  1 · Share on FacebookShare on Twitter Wranglher ✭ November 5 @AARGH Thanks for the line update. No way will there be 7 left by morning (6am).  0 · Share on FacebookShare on Twitter Hyperflame ✭ November 5 CrashAegis said: Hyperflame said: mrazzino said: Hopefully a 5900x is left at Fairfax in the morning. I'm very surprised by the line this early. Its gonna be cold tonight I overestimated a bit, we have a list, 9 people want a 5900x, 4 want a 5950x, so far. But yes, I'm also surprised by the turnout. Wow, was hoping i wouldn't have to schlep out there before dawn but maybe I should to be sure I would highly recommend showing up like... now, rather than later, if the estimated ~20 stock is to be believed 0 · Share on FacebookShare on Twitter Wranglher ✭ November 5 @Sheepykin You mind posting an update when you return? Might make the trip to Rockville.  0 · Share on FacebookShare on Twitter CrispyBudder ✭ November 5 Shadow70_ said: Trying to reach associate at Dallas location for update but they appear to have gone dark at 9PM central. I’m currently the first one in line in Dallas location. Around 13-14 people behind me. From what they told me is they got 5800x 5900x in the store but the 5950x should be delivered to their store before the launch tmr. As of the amount they couldn’t tell me anything about that 1 · Share on FacebookShare on Twitter FirstTimeCamper ✭ November 5 Any news on the Denver store?  Lines?  Stock? 1 · Share on FacebookShare on Twitter cool2562 ✭ November 5 @mrdoubtfull how many in line at Patterson NJ? 0 · Share on FacebookShare on Twitter Vaggeto ✭ November 5 If anyone else is in Dallas or hears about the counts of 5900x and 5950x, please let me know! CrispyBudder said: Shadow70_ said: Trying to reach associate at Dallas location for update but they appear to have gone dark at 9PM central. I’m currently the first one in line in Dallas location. Around 13-14 people behind me. From what they told me is they got 5800x 5900x in the store but the 5950x should be delivered to their store before the launch tmr. As of the amount they couldn’t tell me anything about that Any idea what processor everyone is waiting for? How many for the 5950x? 0 · Share on FacebookShare on Twitter Toby ✭ November 5 RocketStation said: Toby said: RocketStation said: Anyone here going to the Georgia locations? Duluth or Marietta? Or even there already? I'm probably going to be heading to Duluth to he there at 11-12 Could you let me know how the line is? I'm trying to figure out if I wanna go to Duluth or Marietta. Just showed up there is maybe 10 people in line at the Duluth store 0 · Share on FacebookShare on Twitter CrispyBudder ✭ November 5 Vaggeto said: If anyone else is in Dallas or hears about the counts of 5900x and 5950x, please let me know! CrispyBudder said: Shadow70_ said: Trying to reach associate at Dallas location for update but they appear to have gone dark at 9PM central. I’m currently the first one in line in Dallas location. Around 13-14 people behind me. From what they told me is they got 5800x 5900x in the store but the 5950x should be delivered to their store before the launch tmr. As of the amount they couldn’t tell me anything about that Any idea what processor everyone is waiting for? How many for the 5950x? As far as I know it’s only 3 people right now. Mainly everyone here looking for 5900x 0 · Share on FacebookShare on Twitter Julienovakins ✭ November 5 Hi, another request for Madison Heights, MI line numbers?  Looking for 5900x.  I work 3rds and the store is almost 3hr drive for me... 0 · Share on FacebookShare on Twitter Xkix ✭ November 5 12 in line at Paterson most looking for 5950x a couple 5900x 0 · Share on FacebookShare on Twitter DOTmjo ✭ November 5 judging by the low amount of excitement online compared to the 3090/80/70 releases, I think there will be plenty of stock come tomorrow.  0 · Share on FacebookShare on Twitter Subtle ✭ November 5 13 people lined up at Marietta, 8 are hoping to buy 5900x. We have been told there are 12 5900x, and similar stock for other models. 0 · Share on FacebookShare on Twitter CrashAegis ✭ November 5 AARGH said: PrestonYoungsley said: Whats breakdown of chips wanted out of the 22 @ fairfax, I'll probably just roll up in the AM, all i want is a measly 5600x #   Type 08 5950 13 5900 01 5800 01 5600 and 3 for 3080 cards just in case Any clue if the 5950 folks are opting for that card or bust?  Probably take an hour to get there and I'd hate to be just edged out if they opt 5900 instead 0 · Share on FacebookShare on Twitter Subtle ✭ November 5 14 now, 4 people for 5950x. 8 for 5900x  0 · Share on FacebookShare on Twitter bbnn ✭ November 5 Xkix said: 12 in line at Paterson most looking for 5950x a couple 5900x ya'll gonna make a list? 0 · Share on FacebookShare on Twitter «1…10111213141516…26» Go Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article AMD Zen 3/Ryzen 5000 Series Launch Discussion - Page 14 — Micro Center AMD Zen 3/Ryzen 5000 Series Launch Discussion «1…11121314151617…26» Go Comments alex_sowep ✭ November 5 Anyone at Chicago or Westmont location? 0 · Share on FacebookShare on Twitter Dotcomrie ✭ November 5 What's the deal with the timestamps saying 3:00am...i don't get it. 0 · Share on FacebookShare on Twitter KrimsonRelik ✭ November 5 Line is wrapped around the building now in Houston. 0 · Share on FacebookShare on Twitter qwertytheasdf ✭ November 5 KrimsonRelik said: Line is wrapped around the building now in Houston. dang, how many people need a new cpu? my 6700k is "dyING" but not completely dead so I'm fine with waiting. still gonna try the online crew tho, save me a trip.  0 · Share on FacebookShare on Twitter Jinxy ✭ November 5 alex_sowep said: Anyone at Chicago or Westmont location? I am; I'm at the Chicago location. There is just me and one other person currently. The manager said they should have a good variety of each of the different CPU's but he did not give any numbers. 0 · Share on FacebookShare on Twitter SMO ✭ November 5 edited November 5 qwertytheasdf said: KrimsonRelik said: Line is wrapped around the building now in Houston. dang, how many people need a new cpu? my 6700k is "dyING" but not completely dead so I'm fine with waiting. still gonna try the online crew tho, save me a trip.  Might wanna check a certain retailers Twitter post.. TL;DR top 2 zen 3 very limited stock  0 · Share on FacebookShare on Twitter Sheepykin Maryland ✭ November 5 edited November 5 5 people in line at the Rockville location with everyone on a list and want 5900x. Probably no need to rush out for others interested, probably show up closer to 4 or 5am. I was informed that the store staff won't even start handing out vouchers until 6-7am depending on when they arrive. I will only post updates every 5 people who show up until closer to 5am. So if you don't see my post any updates then expect around the number I last posted. So it could be 5-9 people for a while. 1 · Share on FacebookShare on Twitter Kohrs ✭ November 5 Anyone at St David's in PA?  0 · Share on FacebookShare on Twitter Brodim ✭ November 5 Anyone in line at Tustin if so how many? 0 · Share on FacebookShare on Twitter PrivateRyanINDE ✭ November 5 Anyone waiting in cambridge mass? Getting nervous watching all the online activity and might drive out from connecticut early to wait in line. 0 · Share on FacebookShare on Twitter Cellie ✭ November 5 Confirmed no 5950x at Yonkers MC. NE stating 5950x and 5900x stock is not great. 5600x and 5800x is better.  0 · Share on FacebookShare on Twitter Sheepykin Maryland ✭ November 5 Cellie said: Confirmed no 5950x at Yonkers MC. NE stating 5950x and 5900x stock is not great. 5600x and 5800x is better.  I have also been told that there will be no 5950x at Rockville. So unless a miracle happens and unplanned stock suddenly comes in then none here. 1 · Share on FacebookShare on Twitter Hyperflame ✭ November 5 One of the Ryzen marketing managers took note of one of my tweets about camping out and delivered free Domino's to us in Fairfax LOL 1 · Share on FacebookShare on Twitter Sheepykin Maryland ✭ November 5 edited November 5 Hyperflame said: One of the Ryzen marketing managers took note of one of my tweets about camping out and delivered free Domino's to us in Fairfax LOL One of the AMD guys is here at the Rockville store now. He took a picture to document it. 1 · Share on FacebookShare on Twitter radioToys ✭ November 5 Sheepykin said: 5 people in line at the Rockville location with everyone on a list and want 5900x. Probably no need to rush out for others interested, probably show up closer to 4 or 5am. I was informed that the store staff won't even start handing out vouchers until 6-7am depending on when they arrive. I will only post updates every 5 people who show up until closer to 5am. So if you don't see my post any updates then expect around the number I last posted. So it could be 5-9 people for a while. Do you have any idea how the vouchers will work at Rockville? Hoping for a 5800x, but I've got a commitment right when they open. I could swing by earlier for a voucher if I'm able to come back a bit later. 0 · Share on FacebookShare on Twitter 3080nao ✭ November 5 edited November 5 PrivateRyanINDE said: Anyone waiting in cambridge mass? Getting nervous watching all the online activity and might drive out from connecticut early to wait in line. If you want a 5900x or 5950....GO NOW if you want even a chance at it.  All of a sudden since 7pm EST the Cambridge people gone dark, something is up. 0 · Share on FacebookShare on Twitter Xkix ✭ November 5 @bbnn doesn’t look like it but everyone is really chill and friendly here we know the order  0 · Share on FacebookShare on Twitter AARGH ✭ November 5 CrashAegis said: AARGH said: PrestonYoungsley said: Whats breakdown of chips wanted out of the 22 @ fairfax, I'll probably just roll up in the AM, all i want is a measly 5600x #   Type 08 5950 13 5900 01 5800 01 5600 and 3 for 3080 cards just in case Any clue if the 5950 folks are opting for that card or bust?  Probably take an hour to get there and I'd hate to be just edged out if they opt 5900 instead At least 5 are, we are at 26 people in line as of last check in..   11 - 5950 16 - 5900 02 - 5800 01 - 5600 04 - Also interested in 3080's 0 · Share on FacebookShare on Twitter Sheepykin Maryland ✭ November 5 radioToys said: Sheepykin said: 5 people in line at the Rockville location with everyone on a list and want 5900x. Probably no need to rush out for others interested, probably show up closer to 4 or 5am. I was informed that the store staff won't even start handing out vouchers until 6-7am depending on when they arrive. I will only post updates every 5 people who show up until closer to 5am. So if you don't see my post any updates then expect around the number I last posted. So it could be 5-9 people for a while. Do you have any idea how the vouchers will work at Rockville? Hoping for a 5800x, but I've got a commitment right when they open. I could swing by earlier for a voucher if I'm able to come back a bit later. As far as we are aware the manager will arrive sometime between 6 and 7am. They will hand out vouchers to the line so that you don't have to stay until they open like the other releases. I believe most stores have it be until 3pm when you can redeem but I haven't been here for a release before and I don't know more than the fact that they will most likely hand out vouchers. This store did change their hours starting last Sunday, so they are open from 9am instead of the 10am that they used to open. From what I am aware of the 5600x and 5800x there is no rush. The only CPU that will be very limited will be the 5900x, which is to be expected. So I would say see if you can swing by around 6:30am to get a spot for the voucher. Sadly I don't know more or I would tell you. 1 · Share on FacebookShare on Twitter Patjohn82 ✭ November 5 @Cellie how’s the line at Yonkers? Can’t get there until about 8. Just wondering if it’s worth the trip 0 · Share on FacebookShare on Twitter radioToys ✭ November 5 Sheepykin said: radioToys said: Sheepykin said: 5 people in line at the Rockville location with everyone on a list and want 5900x. Probably no need to rush out for others interested, probably show up closer to 4 or 5am. I was informed that the store staff won't even start handing out vouchers until 6-7am depending on when they arrive. I will only post updates every 5 people who show up until closer to 5am. So if you don't see my post any updates then expect around the number I last posted. So it could be 5-9 people for a while. Do you have any idea how the vouchers will work at Rockville? Hoping for a 5800x, but I've got a commitment right when they open. I could swing by earlier for a voucher if I'm able to come back a bit later. As far as we are aware the manager will arrive sometime between 6 and 7am. They will hand out vouchers to the line so that you don't have to stay until they open like the other releases. I believe most stores have it be until 3pm when you can redeem but I haven't been here for a release before and I don't know more than the fact that they will most likely hand out vouchers. This store did change their hours starting last Sunday, so they are open from 9am instead of the 10am that they used to open. From what I am aware of the 5600x and 5800x there is no rush. The only CPU that will be very limited will be the 5900x, which is to be expected. So I would say see if you can swing by around 6:30am to get a spot for the voucher. Sadly I don't know more or I would tell you. Thanks! I think I'll plan to show up around 6am. If the line hasn't filled up like crazy I may have to try for a 5900x instead... 0 · Share on FacebookShare on Twitter otaku_sneakerhead ✭ November 5 The situation at Tustin MC as of 8:30PM 11/4: ~20 people are lined up outside the store in queue for the 5000 series launch however a list has already been established with well over 100 people who have already "secured there position in line" for whatever processor they want. They are no longer needed to be present until check-in times at 4am and 7am on launch day. The problem with this is MC sale of the CPUs are based off of a first come first serve basis. Despite that people were able to come and go as the please without having to physically wait in line, which is typically part of the FCFS process for items with limited availability. This is pretty unfair to the people who are willing to wait in line for however long in order to purchase the product. This system would have been better suited for a raffle giving people the equal opportunity of securing a CPU while saving many time and effort. I understand that this maybe a smarter move in light of COVID-19 however, I feel that MC should be doing more to organize these actual releases rather than leaving it up to the consumers waiting outside. I believe the system was inspired by the one started during the 30 series GPU releases as shown in BitWit's video on youtube, however that system was much more rigid with 30 minute check-in times and required potential buyers to be in queue for much longer times than not as FCFS queues should be. Whether or not the 100 or so people who've already signed up would've been willing to wait when they arrived until doors open, doesn't change the fact that the situation is what it is right now, that there is no real queue and that the list could have easily been manipulated preventing people who were more willing to wait to purchase their item from doing so. TLDR: MC Tustin is getting run by a bunch of people who don't know how a first come first serve queue works. As someone whos camped out over the years for items with limited availability such as shoes, clothing, collectables, etc. This is pretty bullshit. 1 · Share on FacebookShare on Twitter bbnn ✭ November 5 Xkix said: @bbnn doesn’t look like it but everyone is really chill and friendly here we know the order  nice you guys stay safe AARGH said: CrashAegis said: AARGH said: PrestonYoungsley said: Whats breakdown of chips wanted out of the 22 @ fairfax, I'll probably just roll up in the AM, all i want is a measly 5600x #   Type 08 5950 13 5900 01 5800 01 5600 and 3 for 3080 cards just in case Any clue if the 5950 folks are opting for that card or bust?  Probably take an hour to get there and I'd hate to be just edged out if they opt 5900 instead At least 5 are, we are at 26 people in line as of last check in..   11 - 5950 16 - 5900 02 - 5800 01 - 5600 04 - Also interested in 3080's damn people still buying 3080s 0 · Share on FacebookShare on Twitter CrashAegis ✭ November 5 Sheepykin said: radioToys said: Sheepykin said: 5 people in line at the Rockville location with everyone on a list and want 5900x. Probably no need to rush out for others interested, probably show up closer to 4 or 5am. I was informed that the store staff won't even start handing out vouchers until 6-7am depending on when they arrive. I will only post updates every 5 people who show up until closer to 5am. So if you don't see my post any updates then expect around the number I last posted. So it could be 5-9 people for a while. Do you have any idea how the vouchers will work at Rockville? Hoping for a 5800x, but I've got a commitment right when they open. I could swing by earlier for a voucher if I'm able to come back a bit later. As far as we are aware the manager will arrive sometime between 6 and 7am. They will hand out vouchers to the line so that you don't have to stay until they open like the other releases. I believe most stores have it be until 3pm when you can redeem but I haven't been here for a release before and I don't know more than the fact that they will most likely hand out vouchers. This store did change their hours starting last Sunday, so they are open from 9am instead of the 10am that they used to open. From what I am aware of the 5600x and 5800x there is no rush. The only CPU that will be very limited will be the 5900x, which is to be expected. So I would say see if you can swing by around 6:30am to get a spot for the voucher. Sadly I don't know more or I would tell you. Looks like Fairfax is tapped out just about but Rockville isn't awful yet, mind dropping a head count around 3 Am to see if it's worthwhile trying to snow up? I need a tiny bit of sleep after election watching, thanks! 0 · Share on FacebookShare on Twitter Patjohn82 ✭ November 5 @Cellie how’s the line at Yonkers? Can’t get there until about 8Am. Just wondering if it’s worth the trip 0 · Share on FacebookShare on Twitter DOTmjo ✭ November 5 3080nao said: PrivateRyanINDE said: Anyone waiting in cambridge mass? Getting nervous watching all the online activity and might drive out from connecticut early to wait in line. If you want a 5900x or 5950....GO NOW if you want even a chance at it.  All of a sudden since 7pm EST the Cambridge people gone dark, something is up. Yeah, there is definitely a blackout on news coming out of Cambridge lol ......or absolutely no one is there.  0 · Share on FacebookShare on Twitter dragonslayer ✭ November 5 Who's at Paterson Microcenter? How many people are there? 0 · Share on FacebookShare on Twitter Sheepykin Maryland ✭ November 5 CrashAegis said: Looks like Fairfax is tapped out just about but Rockville isn't awful yet, mind dropping a head count around 3 Am to see if it's worthwhile trying to snow up? I need a tiny bit of sleep after election watching, thanks! Sure thing I can give an update then. 0 · Share on FacebookShare on Twitter avian ✭ November 5 How many people are lined at dallas right now? I was planning on going early in the morning but if I have to go even sooner I will. 0 · Share on FacebookShare on Twitter Wranglher ✭ November 5 edited November 5 @Sheepykin do you know how many 5900x they have in inventory 0 · Share on FacebookShare on Twitter «1…11121314151617…26» Go Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article Join the MicroCenterOfficial Folding@Home Team: #257944 - Page 12 — Micro Center Join the MicroCenterOfficial [email protected] Team: #257944 «1…9101112131415…22» Go Comments kmiller922 Glenside, Pa ✭✭✭ June 10 @Wommwalsh congrats on 100 Million and going  2 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ June 11 edited June 11 Well alright then. If you go on vacation, don't forget to mention to someone about monitoring things. Noted. 1 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 11 edited June 11 @MightyMayfield MCO should cross the 10 Billion PPD mark today! The MCO 24avg ranking is 31. As a team, this is how we compare: Green is active users Active Retention 478/1,203 or 39.7% is very good. 1 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 11 edited June 11 Based on [email protected] suggestions my 'summer' folder is a dual 2060 super.  I often see this system >3M PPD.  With a 75% power cap.  Total system power draw is a very modest 370 watts.  GPUs in the low 60Cs. Older Q87 mobo, i7-4770k cpu.  The skeleton chassis was scavenged from an old tower system, it's mostly repurposed gear.  Besides the GPUs, the only new stuff is case fans & heatsink, and I really didn't need the heatsink as I don't do CPU folding as it isn't power efficient.  PPD production is close to a 2080Ti and if you can get OpenBox GPUs, about 1/2 the cost! 4 · Share on FacebookShare on Twitter RedJr55 NEOH ✭ June 12 For those that may be interested, there is currently an online auction (e***, not sure if live links are acceptable here or not) for a small quantity of WATTS UP? .NET power meters at a reasonable cost. Without some type of instrumentation, it's all guesswork...... 1 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 12 We have now passed the 10 Billion point mark with 18 of us now passing the 100 Million mark with 2 more close to it as well. Keep up the great work everyone. We can be sure this isn't going to just go way like we would all like. 2 · Share on FacebookShare on Twitter Kirito ✭✭ June 12 Hey folks, having a problem here. I am running a Lenovo ThinkStation C30, two Xeon Processors, 64 GB of RAM.  Not running a GPU for folding.  OS is Fedora Linux running a KDE desktop.  I have 6.5 TB of Hard Drive.  The OS runs on a 256 m.2 SATA card on the motherboard. The problem...     FAH a7 Client cycles about once every minute or two, runs at 100% and then stops after twenty seconds or less.  Did all my updates, rebooted the machine, and the problem persists.  Moreover, this machine has been working without an issue for three weeks.  I only finished building three weeks ago.  And on top of all this the FAH Control wont run except through a browser.  I am running the 14524 Covid 19 project. I am running two other Linux machines with similar, less powerful setups and a Win10 machine. Ran out of ideas.  Any help is appreciated.  Kirito 0 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 12 Kirito said: Hey folks, having a problem here. I am running a Lenovo ThinkStation C30, two Xeon Processors, 64 GB of RAM.  Not running a GPU for folding.  OS is Fedora Linux running a KDE desktop.  I have 6.5 TB of Hard Drive.  The OS runs on a 256 m.2 SATA card on the motherboard. The problem...     FAH a7 Client cycles about once every minute or two, runs at 100% and then stops after twenty seconds or less.  Did all my updates, rebooted the machine, and the problem persists.  Moreover, this machine has been working without an issue for three weeks.  I only finished building three weeks ago.  And on top of all this the FAH Control wont run except through a browser.  I am running the 14524 Covid 19 project. I am running two other Linux machines with similar, less powerful setups and a Win10 machine. Ran out of ideas.  Any help is appreciated.  Kirito I believe there was a post on the fha fourm that will address the issue if i remember correctly 0 · Share on FacebookShare on Twitter ChrisHarshman ✭✭ June 13 Kirito said: ...OS is Fedora Linux running a KDE desktop... FAH a7 Client cycles about once every minute or two, runs at 100% and then stops after twenty seconds or less.  Did all my updates, rebooted the machine, and the problem persists.  Moreover, this machine has been working without an issue for three weeks.  I only finished building three weeks ago.  And on top of all this the FAH Control wont run except through a browser... What version of Fedora are you running?  There seems to be a lot online about Fedora 31 and 32 using the python3 library instead of python2 and needing to change a header file: https://foldingforum.org/viewtopic.php?f=16&t=31971 1 · Share on FacebookShare on Twitter Kirito ✭✭ June 14 Thank you for helping me get FAHControl operating. Now I have run ito this.  What am I doing wrong? Kirito 15:59:43:WU00:FS00:Starting 15:59:43:WU00:FS00:Removing old file 'work/00/logfile_01-20200612-231159.txt' 15:59:43:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 706 -lifeline 1528 -checkpoint 15 -np 24 15:59:43:WU00:FS00:Started FahCore on PID 8562 15:59:43:WU00:FS00:Core PID:8566 15:59:43:WU00:FS00:FahCore 0xa7 started 15:59:44:WU00:FS00:0xa7:*********************** Log Started 2020-06-14T15:59:43Z *********************** 15:59:44:WU00:FS00:0xa7:************************** Gromacs [email protected] Core *************************** 15:59:44:WU00:FS00:0xa7:       Type: 0xa7 15:59:44:WU00:FS00:0xa7:       Core: Gromacs 15:59:44:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 8562 -checkpoint 15 -np 15:59:44:WU00:FS00:0xa7:             24 15:59:44:WU00:FS00:0xa7:************************************ CBang ************************************* 15:59:44:WU00:FS00:0xa7:       Date: Nov 5 2019 15:59:44:WU00:FS00:0xa7:       Time: 06:06:57 15:59:44:WU00:FS00:0xa7:   Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9 15:59:44:WU00:FS00:0xa7:     Branch: master 15:59:44:WU00:FS00:0xa7:   Compiler: GNU 8.3.0 15:59:44:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC 15:59:44:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64 15:59:44:WU00:FS00:0xa7:       Bits: 64 15:59:44:WU00:FS00:0xa7:       Mode: Release 15:59:44:WU00:FS00:0xa7:************************************ System ************************************ 15:59:44:WU00:FS00:0xa7:        CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz 15:59:44:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 62 Stepping 4 15:59:44:WU00:FS00:0xa7:       CPUs: 24 15:59:44:WU00:FS00:0xa7:     Memory: 62.72GiB 15:59:44:WU00:FS00:0xa7:Free Memory: 58.75GiB 15:59:44:WU00:FS00:0xa7:    Threads: POSIX_THREADS 15:59:44:WU00:FS00:0xa7: OS Version: 5.6 15:59:44:WU00:FS00:0xa7:Has Battery: false 15:59:44:WU00:FS00:0xa7: On Battery: false 15:59:44:WU00:FS00:0xa7: UTC Offset: -4 15:59:44:WU00:FS00:0xa7:        PID: 8566 15:59:44:WU00:FS00:0xa7:        CWD: /var/lib/fahclient/work 15:59:44:WU00:FS00:0xa7:******************************** Build - libFAH ******************************** 15:59:44:WU00:FS00:0xa7:    Version: 0.0.18 15:59:44:WU00:FS00:0xa7:     Author: Joseph Coffland <[email protected]> 15:59:44:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org 15:59:44:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/ 15:59:44:WU00:FS00:0xa7:       Date: Nov 5 2019 15:59:44:WU00:FS00:0xa7:       Time: 06:13:26 15:59:44:WU00:FS00:0xa7:   Revision: 490c9aa2957b725af319379424d5c5cb36efb656 15:59:44:WU00:FS00:0xa7:     Branch: master 15:59:44:WU00:FS00:0xa7:   Compiler: GNU 8.3.0 15:59:44:WU00:FS00:0xa7:    Options: -std=c++11 -O3 -funroll-loops -fno-pie 15:59:44:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64 15:59:44:WU00:FS00:0xa7:       Bits: 64 15:59:44:WU00:FS00:0xa7:       Mode: Release 15:59:44:WU00:FS00:0xa7:************************************ Build ************************************* 15:59:44:WU00:FS00:0xa7:       SIMD: avx_256 15:59:44:WU00:FS00:0xa7:******************************************************************************** 15:59:44:WU00:FS00:0xa7:Project: 14524 (Run 333, Clone 5, Gen 22) 15:59:44:WU00:FS00:0xa7:Unit: 0x0000002580fccb0a5e781c0de4bfe2da 15:59:44:WU00:FS00:0xa7:Reading tar file core.xml 15:59:44:WU00:FS00:0xa7:Reading tar file frame22.tpr 15:59:44:WU00:FS00:0xa7:Digital signatures verified 15:59:44:WU00:FS00:0xa7:Calling: mdrun -s frame22.tpr -o frame22.trr -x frame22.xtc -cpt 15 -nt 24 15:59:44:WU00:FS00:0xa7:Steps: first=5500000 total=250000 15:59:44:WU00:FS00:0xa7:ERROR: 15:59:44:WU00:FS00:0xa7:ERROR:------------------------------------------------------- 15:59:44:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20191026-456f0d636-unknown 15:59:44:WU00:FS00:0xa7:ERROR:Source code file: /host/debian-stable-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/mdlib/domdec.c, line: 6902 15:59:44:WU00:FS00:0xa7:ERROR: 15:59:44:WU00:FS00:0xa7:ERROR:Fatal error: 15:59:44:WU00:FS00:0xa7:ERROR:There is no domain decomposition for 20 ranks that is compatible with the given box and a minimum cell size of 1.4227 nm 15:59:44:WU00:FS00:0xa7:ERROR:Change the number of ranks or mdrun option -rcon or -dds or your LINCS settings 15:59:44:WU00:FS00:0xa7:ERROR:Look in the log file for details on the domain decomposition 15:59:44:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS 15:59:44:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors 15:59:44:WU00:FS00:0xa7:ERROR:------------------------------------------------------- 15:59:49:WU00:FS00:0xa7:WARNING:Unexpected exit() call 15:59:49:WU00:FS00:0xa7:WARNING:Unexpected exit from science code 15:59:49:WU00:FS00:0xa7:Saving result file ../logfile_01.txt 15:59:49:WU00:FS00:0xa7:Saving result file md.log 15:59:49:WU00:FS00:0xa7:Saving result file science.log 15:59:49:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66) 16:00:34:35:127.0.0.1:New Web session 16:00:43:WU00:FS00:Starting 16:00:43:WU00:FS00:Removing old file 'work/00/logfile_01-20200612-231259.txt' 16:00:43:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/v7/lin/64bit/avx/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 706 -lifeline 1528 -checkpoint 15 -np 24 16:00:43:WU00:FS00:Started FahCore on PID 8920 16:00:43:WU00:FS00:Core PID:8924 16:00:43:WU00:FS00:FahCore 0xa7 started 0 · Share on FacebookShare on Twitter Kirito ✭✭ June 14 The computer is running Fedora 32.  It cycles this log every minute.  The FAH Control wouldn't appear on screen and I couldn't get log data before.  The log data above came about thanks to the link you gave me Chris.  Still haven't solved the cycling problem.  Is it a problem with their GROMACS software?   How do I flush the job abd start something new to see if its just the job that is causing the problem? Kirito 0 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 14 edited June 14 I would suggest posting that log on the fourm for fah the guys there can help you a ton with it. It does look like a setting in linux that might be a issue but not 100% sure. I don't think a wu can be flushed out but it will time out and fail. you might be also able to look at the log file and check a gromacs settings against the url they have in the log http://www.gromacs.org/Documentation/Errors 0 · Share on FacebookShare on Twitter Kirito ✭✭ June 14 Thanks kmiller, I will put the data up on the FAH forum.  I went through the Gromacs error page when I found it in the log but nothing seemed to fit the problem (of course that page hasn't been updated since 2016.)  Lets see what FAH has to say. Thanks! Kirito 0 · Share on FacebookShare on Twitter Kirito ✭✭ June 15 Found a solution!  Apparently this particular project has issues with running 24 cores.  Had to switch it down to 12 cores at 3/4 speed and now it has been running all night.  Thanks for everyones help! Kirito 2 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 17 edited June 17 @MightyMayfield nicely done cracking the 400 mark. 1 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ June 17 edited June 17 kmiller922 said: @MightyMayfield nicely done cracking the 400 mark. Thank you! MC45 is also about to cross into 1000 territory, too! I'm grateful for their and everyone's continued contributions. I never imagined a simple request of mine might lead to an entire army of machines sciencing their way towards a better future. I do wish hardware was a bit easier to get these days though. Large power supplies are getting slim pickings for folding rigs. 1 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 17 edited June 17 We really need a way to keep people motivated in this. I'm just disapointed to see the amount of support from my local store. Reason I say this is my laptop and one other gpu a 980ti I have is running around the clock, My cpu and 2080ti card are used for about 10-14 hours a day by my son since he's still home from work yet. You would think even if the store shut down a dedicated system that they have on the table with a sign, running just durning the hours of operation they would be able to do more than 35k points in a day. Just something I've taken notice to. 0 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 17 edited June 17 kmiller922 said: We really need a way to keep people motivated in this. The summer months will be difficult as most people will be paying more than double for the cost to run gear because of the cost to extract the heat generated. Of course no HVAC system is near 100% efficient, so summer PPDs can strain budgets & emotional commitments to a cause. One of the reasons I posted above about trimming watts expended and selecting gear with higher PPD/watt. So, one approach would be to encourage people to return in the cooler months.  Folding on cooler days or evening hours when power might be cheaper too. 0 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 18 @kmiller922 The expectation of a 24hr/365 commitment is daunting to many people and the cost of participation a burden. Some ideas to ease the Folding commitment, encourage participation: 1) Fold-athon Weekend, once-per-month, the team maxes out heir effort for a weekend, challenging people to tag on Friday,Monday. Good way to invite others to participate and recruit for the team. 2) Sprints, similar in concept to Fold-athon. A day, a week, self-challenge, challenge friends, other teams. 3) Kiosks at local MC stores. My local store doesn`t have anything that I`m aware of... 4) Fall recruiting strategy, cooler temps, more powerful gear with higher efficiency will be arriving. 1 · Share on FacebookShare on Twitter teamtempest ✭ June 18 I don't know if any kind of contest would motivate me to do anything more than I'm already doing. Which is not much, as after two months my points totals are a little over two million and my work units completed a little over 400. My off-the-shelf machine is simply not that powerful. I'm basically just donating spare cycles when I'm not seriously using it (running the folder at full power drags down anything involving rapid screen updates). What I find more motivating is seeing actual results coming out of all these contributions people are making. How many work units does it take to complete an average project? 'Cause I have a feeling that I'm seeing the same project numbers that I saw at the start. Hundreds of millions of work units completed and apparently not done yet? That's discouraging. 0 · Share on FacebookShare on Twitter Kirito ✭✭ June 18 cine_chris said: @kmiller922 The expectation of a 24hr/365 commitment is daunting to many people and the cost of participation a burden. I know, living in New England, that winter will be harder for me as I will have to pay for gas and electricity.  Don't need the heat running in the summer and I don't run air conditioning, just fans, though my computer room is 5 degrees warmer than the rest of the house.  That said, helping people get GPU's would go a long way to helping.  Kirito 0 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ June 18 teamtempest said: I don't know if any kind of contest would motivate me to do anything more than I'm already doing. Which is not much, as after two months my points totals are a little over two million and my work units completed a little over 400. My off-the-shelf machine is simply not that powerful. I'm basically just donating spare cycles when I'm not seriously using it (running the folder at full power drags down anything involving rapid screen updates). What I find more motivating is seeing actual results coming out of all these contributions people are making. How many work units does it take to complete an average project? 'Cause I have a feeling that I'm seeing the same project numbers that I saw at the start. Hundreds of millions of work units completed and apparently not done yet? That's discouraging. Hi teamtempest, the amount of WU in a project can vary greatly depending on the type of research it is. I would advise looking at the scientific papers published by the FAH team if you would like to see what ends up of the computational power! Some of them are quite interesting reads. They can take months to be peer reviewed though, so many of the covid papers are going to be quite some time out still. Those can be seen at Stanford's page before public release. 1 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ June 18 edited June 18 I time traveled and double posted don't mind me. 0 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 18 @cine_chris just to point one thing out I did refer to my local MC store not to everyone else. 1 · Share on FacebookShare on Twitter kmiller922 Glenside, Pa ✭✭✭ June 18 MightyMayfield said: I time traveled and double posted don't mind me. stop going around the sun at max warp in the Enterprise lol 1 · Share on FacebookShare on Twitter MightyMayfield Mayfield Heights, OH ✭✭ June 19 edited June 19 Wow, triple post and a day later. Ouch. 0 · Share on FacebookShare on Twitter Kirito ✭✭ June 19 kmiller922 said: MightyMayfield said: I time traveled and double posted don't mind me. stop going around the sun at max warp in the Enterprise lol I suspect it has to do more with parallel processing on an overclocked brain. You are seeing the results of data mirroring (or data bleeding) across processors. We know Mayfield has been running super hot lately to put the numbers up. He needs to go take a swim in a cooling pond.  Followed by a couple of Corona's. (The beer, not the virus). Kirito 2 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 19 @kmiller922 Of the Top50 Folding teams MicroCenter was 7th for member retention.  Thinking it might be interesting to see how other teams retain folks. 3 · Share on FacebookShare on Twitter cine_chris Powder Springs, GA ✭✭✭ June 24  Another huge milestone, 2B points for @MightyMayfield . I did a sprint self-challenge attempting to hit 200M points before MM hit 2B.  Yes, I lost, by 2M points, but I hit my top PPD 8.5M, now ranked in the top 4K & completed 2,500 WUs.  So, it was a worthwhile effort.  5 · Share on FacebookShare on Twitter ChrisHarshman ✭✭ June 24 Awesome!  Good job cine_chris 2 · Share on FacebookShare on Twitter «1…9101112131415…22» Go Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article How are black Friday sales here? — Micro Center How are black Friday sales here? Geo ✭ November 8 edited November 8 in Sales I'm new to ohio and I'm looking to make a new pc, I'm doing massive over time and plan to have around 4000-5000 dollars for black friday, I'm not sure I'll have enough for all the parts i want but the main goal will be the more expensive parts followed by the memory ram cooling and the rest. But the more money I save the faster I can have it put together, which I'll also probably have done here. Are the black friday sales here nice? 0 · Share on FacebookShare on Twitter Comments LandShark admin November 9 Hey @Geo! Yes, our Black Friday sales are here! https://www.microcenter.com/search/search_results.aspx?Ntt=5206&Ntk=Adv I've provided the link above to view all of our sales! We are offering our Black Friday Price Promise, in which Micro Center customers that purchase a qualifying item (products listed in our Black Friday promotions) between 11/02/20 – 11/30/20 and if the price of the qualifying item goes lower than your purchase price before November 30, 2020, we will refund you the difference between your purchase price and the lower price. Refunds must take place before 01/15/2021.  More details can be found on the page I linked above. 1 · Share on FacebookShare on Twitter Geo ✭ November 9 Ok, thank you. I have several pieces I've decided on for certain, as for the rest I'll probably ask for what I should get since I'm not certain for it all. Hopefully my wallet will be full enough with the 60-70 hours of work I'll be doing each week for this month XD 0 · Share on FacebookShare on Twitter LandShark admin November 9 We're here for you if you have questions! Our BYO associates in the store are also an excellent resource if you have questions while you're shopping for parts in the store! 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article Micro Center Black Friday Announcement — Micro Center Micro Center Black Friday Announcement TSPhillipT admin November 2 edited November 2 in Announcements, News & Launches Hello everyone – thank you for being a part of our Micro Center Community!  I am proud to announce our Black Friday Sale for the year 2020!  One of our biggest concerns when it comes to Black Friday is the large groups and gatherings common for Black Friday shopping.  These can be very dangerous during the current situation regarding COVID-19.   In response to these worries, our Black Friday will begin on 11/02/2020 and go all the way to 11/30/2020.  We are expecting to spread the crowd thinner by increasing the duration of Black Friday.  We are extending our Black Friday sales for nearly a whole month to give our customers more time to shop and save on the best products this holiday season. In addition to our extended Black Friday Sale, we will also be keeping a Black Friday Price Promise!  More details on this to come in the next post.  Black Friday Price Promise My Favorite Picks of the Sale! 0 · Share on FacebookShare on Twitter Comments TSPhillipT admin November 2 edited November 2 Black Friday Price Promise Our Black Friday Price Promise ensures you that you have the lowest price on items listed in our Black Friday promotions.  If the purchase price for your item goes lower during our extended Black Friday period, you can contact us via Text or Chat, and we can get that item price matched!  You can text your local Micro Center store to begin the Black Friday Price Promise process via text.  To chat, please visit our Solutions Center and a prompt to begin a chat will be in the bottom right.  You may need to disable your adblocker if you do not see that prompt in the bottom right.   Black Friday Price Promise: Micro Center customers that purchase a qualifying item (products listed in our Black Friday promotions) between 11/02/20 – 11/30/20 and if the price of the qualifying item goes lower than your purchase price before November 30, 2020, we will refund you the difference between your purchase price and the lower price. Refunds must take place before 01/15/2021. Excludes products purchased with coupons, bundles, services and price errors. All refunds will be based upon your original payment method. 0 · Share on FacebookShare on Twitter TSPhillipT admin November 2 edited November 3 Here are some of my favorite picks from our current Black Friday Sale!  I think $299.99 for an i9 9900k is a fantastic price for the power the 9900k has.  Not too familiar with building a PC and only want one to plug in and play, our PowerSpec G228 is an excellent start for a gaming PC with the ability to upgrade with newer parts in the future!  Also, the iPad 8 for $279.99 is perfect for anyone needing a tablet, and you can pair that with the Apple Airpod Pros at $199.99.  I love my Airpod Pros and use them every day; both the Active Noise Cancelling and Transparency modes are amazing for multiple situations.  If you are in need of a good laptop for everyday use, I highly recommend the Acer Aspire 3, with a 10th Gen Processor, it is a great modern laptop at $499.99   Check out all of our Black Friday Sales here! 0 · Share on FacebookShare on Twitter TSPhillipT admin November 2 Which sales look interesting to you?  You can comment on this thread for any questions you have regarding Black Friday!  I would love to see what items you may be getting on Black Friday; post them here, so I know and maybe get it myself!  1 · Share on FacebookShare on Twitter BlazerBuddy ✭ November 2 edited November 4 I might grab me an iPad 8 for my dad. His old iPad has been dying lately and he will start shopping for a new one soon. If I mention this to him, he might decide to buy it if he thinks the price is good. 1 · Share on FacebookShare on Twitter Simeon ✭ November 3 i need a motherboard, a monitor , a graphic card 8 and over   an AMD  processor  16 core and do monthly payments i do have the micro center credit card 0 · Share on FacebookShare on Twitter Roxas112 ✭ November 4 Is this it for the Black Friday sale for the year? Or will there be more items added in the up coming weeks? Thanks! 0 · Share on FacebookShare on Twitter LandShark admin November 4 Roxas112 said: Is this it for the Black Friday sale for the year? Or will there be more items added in the up coming weeks? Thanks! Here's a list of our Black Friday deals! It's possible that the items on that list may change, however, we are offering the Micro Center Black Friday Price Promise! Which is Micro Center customers that purchase a qualifying item (products listed in our Black Friday promotions) between 11/02/20 – 11/30/20 and if the price of the qualifying item goes lower than your purchase price before November 30, 2020, we will refund you the difference between your purchase price and the lower price. Refunds must take place before 01/15/2021. Excludes products purchased with coupons, bundles, services and price errors. All refunds will be based upon your original payment method. Hope this explanation helps! 0 · Share on FacebookShare on Twitter Raven1984 ✭ November 9 Need one clarification. AMD ryzen 3700x is also listed item in the link provided. But when I talked with rep yesterday, he mentioned that we have to visit store for any refund for the item. Can you please confirm if possible to initiate refund online as mentioned here? Also wanted to check if microcenter will also price match newegg/amazon price if any deal pops up during black friday.  If yes what are the conditions/documents required even for instore refund?  0 · Share on FacebookShare on Twitter LandShark admin November 9 Hi @Raven1984 If the item was purchased with a credit card, typically we are able to offer a return for the difference without being required to return to the store. We are not able to price match Newegg or Amazon Black Friday deals. I hope this info helps. Let me know if you have any other questions! 1 · Share on FacebookShare on Twitter Intermatrix ✭ November 11 Microcenter Only price matches Amazon if its sold by Amazon. They will Not honor 3rd Party Amazon sellers. Just to Clarify.. 1 · Share on FacebookShare on Twitter RobH ✭ November 16 We would like to get our daughter a laptop for Christmas.  Many stores offer an extended return policy during the holidays to protect the customer if there is an issue - all I see listed on your site is a 15 day return policy which would not extend from the purchase until when the gift was opened.  We would rather give our business to you, but this would be a deal breaker...? 0 · Share on FacebookShare on Twitter Raven1984 ✭ November 16 @RobH have an point. I picked up 3700x Ryzen from Microcenter. It also has 15 days return warranty and would be nice if microcenter provides extended returns during holidays as I will get to PC building only after BF and gathering all necessary components.  0 · Share on FacebookShare on Twitter LandShark admin November 16 @RobH I can confirm that we do have an extended holiday return period. Items purchased after November 1 have an extended return to January 15. Our website should be updated to reflect this info. Hope this helps! 0 · Share on FacebookShare on Twitter RobH ✭ November 16 Thanks Land Shark!  Good to know! 0 · Share on FacebookShare on Twitter Vigor8 ✭ November 17 edited November 17 If I were to be looking to go in person to get the refund, would I need to bring the items I purchased back to the store with me?  Or could I just bring the receipt to get refunded the difference for the black Friday promise? 0 · Share on FacebookShare on Twitter RobH ✭ November 18 @LandShark I don’t see an update about this on the web site.  If it’s there, can you provide a link?  The front page talks about the price match refunds being offered until 1/15, but that’s all. Thank you. 0 · Share on FacebookShare on Twitter LandShark admin November 18 RobH said: @LandShark I don’t see an update about this on the web site.  If it’s there, can you provide a link?  The front page talks about the price match refunds being offered until 1/15, but that’s all. Thank you. Still working with our web team to get this info published to our website. However, here's more info about our Holiday return period. https://community.microcenter.com/kb/articles/24-can-i-return-a-product-that-is-defective 0 · Share on FacebookShare on Twitter Kainam Kansas City ✭ November 26 0 · Share on FacebookShare on Twitter Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article Corsair Lighting System Query — Micro Center Corsair Lighting System Query Ionmaster987 ✭ September 6 in Cases and Cooling I'm planning to get a Corsair H100i Platinum CPU Cooler ( 240mm rad, 2 fans ) But, i have some questions about Corsair's lighting system, specifically; Would i be able to hook every RGB cable into a Corsair RGB LED Fan Hub and just have it work? or do i need something else? 0 · Share on FacebookShare on Twitter Comments TSMikeW admin September 6 Greetings @Ionmaster987 Specifically on the H100i Platinum RGB it just connects to your board via a USB 2.0 header and you run this via the iCUE software. If you have a lot of Corsair RGB devices they do sell the Corsair Command Pro to manage everything, with the Corsair Node's as expansion options for multiple devices.  0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 edited September 7 TSMikeW said: Greetings @Ionmaster987 Specifically on the H100i Platinum RGB it just connects to your board via a USB 2.0 header and you run this via the iCUE software. If you have a lot of Corsair RGB devices they do sell the Corsair Command Pro to manage everything, with the Corsair Node's as expansion options for multiple devices.  So, i couldn't just.. connect the fans the H100i Platinum comes with to this thing and have it work and be controllable via iCUE? Because, i don't have any corsair devices, my case might be corsair but it's so old it doesn't have any controller or anything, so, do i **need** the Commander Pro to be able to have the fans light up? or, will they light up, but not be controllable lighting-wise? 0 · Share on FacebookShare on Twitter Enamelized Va ✭ September 7 @Ionmaster987 with the Corsair H100i coming with that controller you plug it into a Sata connection and then there's a 3 pin you connect to the motherboard and then to that controller. From there your fans plug into the controller and once you boot into windows download the Corsair iCue to then control the RGB colors desired. I'll have to see if I might be able to take some pics of mine that I installed on my other system 0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 @Enamelized My friend, you're slightly misundestanding. the fans it comes with, i don't have the capability of hooking the RGB wires into anything, i was asking: do i need something fancier, or can i just get this basic controller, hook the fans into it, and they'll work just fine, be configurable and stuff? 0 · Share on FacebookShare on Twitter Enamelized Va ✭ September 7 edited September 7 Not misunderstanding at all, as mentioned that controllers used to plug your fans into and through the Corsair iCue software you can in turn control the RGB of said fans 0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 So, i don't need a commander pro at all? 0 · Share on FacebookShare on Twitter TSPhillipT admin September 7 Hello @Ionmaster987 I am the biggest Corsair fan here at Micro Center haha.  Let me see if I can assist you with this! The Corsair RGB Fan Hub (the one pictured) will power the RGB For your Corsair RGB Fans.  It will not allow you to control the RGB however, it just defaults them to the default RGB setting on the Fan (Rainbow Cycle usually).  You can however, connect the RGB Fan Hub to either the Lightning Node PRO or the Commander PRO.  These will connect to the RGB Fan HUB and then connect to a USB 2.0 header on your motherboard.   In short, to make it controllable, you WILL need to connect it to the Lightning Node PRO or Commander PRO.   0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 edited September 7 Darn, would i at-least be able to control their speed through the hub? Or no? If so, i might as-well just get a Commander Pro, since it has enough slots to control the fans the AIO comes with. In the future, might want a lighting node pro to be able to have the RGB be seperate for other fans.. So, now a question: do you think that AIO can fit inside a Carbide Series Spec01?  https://cdn.discordapp.com/attachments/529832591134556162/752558364168552489/unknown.png This is my case, it looks like it'll fit at the top if the tank is towards the front.. Wait hang on, i just looked, apparently the one i've been talking about is the iCUE H100I RGB PRO XT Liquid Cooler, the Platinum's a bit too expensive, but it appears it doesn't even have rgb fans, so i might not even need a commander.. What's the difference between the iCUE H100I RGB PRO XT Liquid Cooler and the Hydro Series H100i RGB Platinum 240mm Liquid CPU Cooler? 0 · Share on FacebookShare on Twitter TSTonyV admin September 7 The fan speed is controllable by your motherboard/monitoring software, based on your CPU temperature. You do NOT need the Lighting Node Pro or Commander Pro to change the actual fan speeds. The difference between the two coolers is that the H100i RGB PRO XT does not have RGB fans, while the H100i platinum does. Both of them have RGB on the pump.  Based on Cosair's spec sheet for your case it can only support a 120mm radiator, not a 240mm.  0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 TSTonyV said: The fan speed is controllable by your motherboard/monitoring software, based on your CPU temperature. You do NOT need the Lighting Node Pro or Commander Pro to change the actual fan speeds. The difference between the two coolers is that the H100i RGB PRO XT does not have RGB fans, while the H100i platinum does. Both of them have RGB on the pump.  Based on Cosair's spec sheet for your case it can only support a 120mm radiator, not a 240mm.  You sure a 240mm won't fit? the top, if the back fan was removed, could probably fit it in.. If not, I'm not really sure what to do, i've been wanting an AIO just because it'd be quieter and better looking that i haven't given any thought to what i'd do if i couldn't even put it in. 0 · Share on FacebookShare on Twitter TSTonyV admin September 7 I'm going based on Corsair's spec sheet on their website.  https://www.corsair.com/us/en/Categories/Products/Cases/Carbide-Series™-SPEC-01-Red-LED-Mid-Tower-Gaming-Case/p/CC-9011050-WW#tab-tech-specs Even if it looks like there's room, the question is what the clearances are. The problem with the Spec-01 is that if you install a top-mounted radiator and fans they will come down far enough that they'll cover the tops of the RAM slots as well as the 8-pin CPU power on the top-left corner, and any other things like fan headers across the top. If your RAM or anything else plugged in across the top is too tall, you won't be able to properly install the cooler.  0 · Share on FacebookShare on Twitter Ionmaster987 ✭ September 7 So, then i'd need a new case.. Well, thank you for confirming this, i will not be buying an AIO liquid cooler because apparently it won't fit. 0 · Share on FacebookShare on Twitter Sign In or Register to comment. Community Article Recent Discussions — Micro Center Recent Discussions   «1…45678910…100» Go New Discussion New Discussion Ask a Question Expand for more options. Discussion List parts 22 views 1 comment 0 points Most recent by TS_JosephF November 25 Customer Service Questions Temporarily Closed For Deep Cleaning Sharronville? 18 views 1 comment 0 points Most recent by TS_JosephF November 25 Customer Service Questions Online Order 75 views 5 comments 0 points Most recent by TS_JosephF November 24 Customer Service Questions Do you add RAM to the 27" Apple iMac? Answered 12 views 1 comment 0 points Most recent by LandShark November 24 Apple Ryzen CPU Not Operating as Intended? 25 views 1 comment 0 points Most recent by LandShark November 24 Technical Support Questions Powerspec 850 W Gold loud whine 21 views 4 comments 0 points Most recent by Mechrothatcher November 24 Power Supplies Need Drive Password 13 views 1 comment 0 points Most recent by LandShark November 24 Technical Support Questions If I reserve something, will it get any discounts that may show up later before I pay? 31 views 3 comments 0 points Most recent by LandShark November 24 Customer Service Questions AIB cards on the 25th? 444 views 8 comments 0 points Most recent by TS_JosephF November 24 Sales Powerspec B245 keeps locking up when idle 14 views 1 comment 0 points Most recent by LandShark November 24 Technical Support Questions Very slow performance on new Inland Performance 2TB SSD 3D NAND M.2 2280 PCIe NVMe 4.0 x4 176 views 5 comments 0 points Most recent by LandShark November 24 Inland PowerSpec G507 - Green screen crashes 393 views 26 comments 0 points Most recent by LandShark November 24 PowerSpec Old Warhorse - Do I remember how to build? 20 views 3 comments 0 points Most recent by LandShark November 24 Help Choosing Parts No box return 24 views 1 comment 0 points Most recent by LandShark November 24 Customer Service Questions Best way to hunt for a 5600x 94 views 1 comment 0 points Most recent by LandShark November 24 Sales Lian Li O11D Mini 25 views 1 comment 0 points Most recent by LandShark November 24 Sales Cancelling an order 33 views 1 comment 0 points Most recent by LandShark November 24 Customer Service Questions No box return Answered 13 views 1 comment 0 points Most recent by LandShark November 24 Customer Service Questions About MC Custom PC Builder Tier 5 Answered 14 views 1 comment 0 points Most recent by LandShark November 24 Customer Service Questions Best way to dispose of old computers Accepted Answer 17 views 1 comment 0 points Most recent by LandShark November 24 Customer Service Questions Dell XPS 9500 vs. Precision 5540 for 3D CAD and Rendering Answered 26 views 1 comment 0 points Most recent by LandShark November 24 Sales will it perform? 19 views 2 comments 0 points Most recent by Pantone376 November 24 Help Choosing Parts AMD Radeon RX 6000 Series - In-store Availability? 3.7K views 10 comments 0 points Most recent by LandShark November 24 Sales BSOD: Thread Stuck in Device Driver PowerSpec B244 61 views 10 comments 0 points Most recent by kartik November 24 Technical Support Questions Inland PCIe 4.0 SSD drivers 15 views 0 comments 0 points Started by stalag November 24 Inland 5600x and 3070 118 views 0 comments 0 points Started by muffin November 24 Graphics Cards Redeem Code for Call of Duty Cold War After Purchase of Nvidia RTX 3090 Answered 53 views 2 comments 0 points Most recent by 3DPhreak November 23 Customer Service Questions Met some cool people at 6000 series launch at Mayfield heights looking for #1 19 views 0 comments 0 points Started by SamTorres_79 November 23 Off Topic Lian Cool II Front RGB help 31 views 4 comments 0 points Most recent by LandShark November 23 Technical Support Questions   «1…45678910…100» Go New Discussion New Discussion Ask a Question Expand for more options. Community Article RTX 3000 Series Micro Center Discussion & FAQ! - Page 41 — Micro Center RTX 3000 Series Micro Center Discussion & FAQ! «1…38394041424344…56» Go Comments JugsOfHolyness ✭ September 24 Tustin MicroCenter 3090 Sign Up Sheet:  tinyurl.com/3090mc  #'s 1-26 are guaranteed a 3090  #'s 27-70 are praying to RNGesus 0 · Share on FacebookShare on Twitter LouVizz ✭ September 24 EvanH said: can buy a 3090 right now. Even walmart getting in on the scalping game.  Sold & shipped by Auto Shop Consulting, Inc 0 · Share on FacebookShare on Twitter Lukeab02 ✭ September 24 Any updates on Mayfield, OH location yet? 0 · Share on FacebookShare on Twitter Duff2087 ✭ September 24 Lukeab02 said: Any updates on Mayfield, OH location yet? Currently 6th in line, there's over 20 total  0 · Share on FacebookShare on Twitter Lukeab02 ✭ September 24 Duff2087 said: Lukeab02 said: Any updates on Mayfield, OH location yet? Currently 6th in line, there's over 20 total  So probably no point going out there in the morning? 0 · Share on FacebookShare on Twitter Duff2087 ✭ September 24 I wouldn't recommend it but you never know. 0 · Share on FacebookShare on Twitter rickcvlr ✭ September 24 YoshiMoshi said: rickcvlr said: YoshiMoshi said: Six in line at Cambridge now. And I misspoke. Up to 8 more cards coming. Totaling up to 10 cards total Well I guess that's that then. I was planning on getting there at around 9pm-10pm tonight but that's likely a waste of time at this point. Is the line still holding at six? Yes Cambridge update? Worth coming down now? 0 · Share on FacebookShare on Twitter Chasemm18 ✭ September 24 @spauls121 hey man! Just curious , do you know what brands/models were given out for the 3090? 0 · Share on FacebookShare on Twitter spauls121 ✭ September 24 edited September 24 Chasemm18 said: @spauls121 hey man! Just curious , do you know what brands/models were given out for the 3090? They didn't say; the way the voucher system is working for Houston is that we each got a number to mark our place in line. The lowest number to be at the store at 10am gets first pick and then it goes from there (I was #2 in line). #1 is crashing at my place and we are both heading out at the same time (~9:30am) 1 · Share on FacebookShare on Twitter YoshiMoshi ✭✭ September 24 rickcvlr said: YoshiMoshi said: rickcvlr said: YoshiMoshi said: Six in line at Cambridge now. And I misspoke. Up to 8 more cards coming. Totaling up to 10 cards total Well I guess that's that then. I was planning on getting there at around 9pm-10pm tonight but that's likely a waste of time at this point. Is the line still holding at six? Yes Cambridge update? Worth coming down now? All cards known to be receiving for sure are already accounted for, would just be waiting at this point hoping a truck comes with more  0 · Share on FacebookShare on Twitter rickcvlr ✭ September 24 YoshiMoshi said: rickcvlr said: YoshiMoshi said: rickcvlr said: YoshiMoshi said: Six in line at Cambridge now. And I misspoke. Up to 8 more cards coming. Totaling up to 10 cards total Well I guess that's that then. I was planning on getting there at around 9pm-10pm tonight but that's likely a waste of time at this point. Is the line still holding at six? Yes Cambridge update? Worth coming down now? All cards known to be receiving for sure are already accounted for, would just be waiting at this point hoping a truck comes with more  Is that ~12ish cards which have been accounted for? Might be worth heading down tomorrow AM if that's the case. Thanks for the responses, btw. 0 · Share on FacebookShare on Twitter Sidney_Smi ✭ September 24 Chicago already took down names. They even have a guard out letting people know. 0 · Share on FacebookShare on Twitter CrispyBudder ✭ September 24 Dallas there are currently 7 cards reserved and 3 more comes tomorrow so in total 10 cards. I’m 8th and 18 people are here currently  0 · Share on FacebookShare on Twitter Roeed ✭ September 24  Does anyone knows Where can I order online other than Best Buy ? 0 · Share on FacebookShare on Twitter gardotd426 ✭ September 24 Sharkbait said: Anyone at the Sharonville location know what the line looks like. Debating on lining up after I get off at 10 pm 25 in line. For a maximum of 10 cards.  0 · Share on FacebookShare on Twitter Chopreme ✭ September 24 Anybody know how long the line is at Paterson NJ? 0 · Share on FacebookShare on Twitter LouVizz ✭ September 24 anybody camped out in Yonkers or did they steal your phones already ? 0 · Share on FacebookShare on Twitter kishinfoulux ✭ September 24 Chopreme said: Anybody know how long the line is at Paterson NJ? All accounted for already. 0 · Share on FacebookShare on Twitter Crazxy ✭ September 24 Anyone at the Ohio Sharonville location have info on the line/how many cards? 0 · Share on FacebookShare on Twitter Lilroyrmx ✭ September 24 anyone @ the westbury mc? hows it looking? 0 · Share on FacebookShare on Twitter Feldsp4r ✭ September 24 Lilroyrmx said: anyone @ the westbury mc? hows it looking? Was there at 4 pm yesterday and there were were 20+ people in line already 0 · Share on FacebookShare on Twitter kishinfoulux ✭ September 24 Voucher obtained. Pretty much official at this point.  0 · Share on FacebookShare on Twitter ksantangelo223 ✭ September 24 PSA for Chicago location - we were sent home last night with vouchers due to the protests/police activity. All cards are accounted for, dont wait in line this morning unless you have one. 0 · Share on FacebookShare on Twitter AntzC ✭ September 24 I actually got a 3090 online couldn't believe when my credit card notification rang. Good luck to anyone still trying to get this! 0 · Share on FacebookShare on Twitter donteatmenooo ✭ September 24 Crazxy said: Anyone at the Ohio Sharonville location have info on the line/how many cards? I think in the other thread someone said there were 20 people in line and only 10 cards expected. 0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 This is so bad, I really have to laugh.. I have one in my best buy cart but it wont let me buy it playing virtual tug of war.. hahaha - (I know they wont let me have it) Kudos to all you guys that waited 60+ hours 0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 edited September 24 0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 Well? 0 · Share on FacebookShare on Twitter Tim0808 ✭ September 24 edited September 24 Not me but look what has been facilitated 0 · Share on FacebookShare on Twitter Juanandonly ✭ September 24 AntzC said: I actually got a 3090 online couldn't believe when my credit card notification rang. Good luck to anyone still trying to get this! How everything was sold out for me the second it was released 0 · Share on FacebookShare on Twitter «1…38394041424344…56» Go Sign In or Register to comment. Community Article (Closed) September PC Showcase Contest - Enter to Win up to a $500 Gift Card! — Micro Center (Closed) September PC Showcase Contest - Enter to Win up to a $500 Gift Card! LandShark admin August 26 edited October 5 in Announcements, News & Launches 9/18 Update: Thanks for all the submissions! Vote for your favorite here: https://community.microcenter.com/discussion/4827/september-showcase-contest-vote-for-your-favorite We’ve absolutely loved the builds that you all have submitted thus far and we want to keep that going another month of contest! However, we’re changing things up this time! For this month’s contest, we want to give you the opportunity to vote on the winner.  Submit your entries between Sept 1st and Sept 15th We'll select the top 5 based on the following criteria. Photo quality Quality of description of the post Quality of cable management Uniqueness of build or theme How the PC fits into the full setup We will announce the top 5 on 9/18 and a link to the top 5 submissions will be posted in the main thread. Voting will close on 9/25. Until that time, you'll be able to vote for your pick of the top 5. Winners will be contacted the following week $500 grand prize, $ 250-second place, $100 third-place Follow these simple steps to submit your PC Build Showcase: Step 1. Sign in to fill out the build submission form Step 2. Fill out the build category, name, favorite feature, and description. Include details about the process, what you use your PC for, things you would change, etc. Step 3. Add a few glamour shots of your completed build Step 4. Fill in your parts used Note: You can manually add archived or custom parts. In the example below, I've added an Intel i7-7700K by typing in the "Select CPU" field. Since the part is not listed I then selected "Add Intel Core i7" as seen below in red. Once you've added your part, you can adjust the price to correctly list what you paid. Step 5.  Select "Save", then select "Publish" to submit your build for approval We're excited to see more of the amazing builds and setups that you've created! Keep them coming! Contest begins 12:01 am ET on September 1st, 2020 Contest ends 11:59 pm ET on September 30th, 2020. The the grand prize winner will win a $500 Micro Center gift card. The second-place winner will win a $250 Micro Center gift card, and the third-place winner will win a $100 Micro Center Gift Card. Check out our Streaming Must-haves Contest for another chance to win! Best of luck! See attached contest terms and conditions. September PC Build Showcase Contest Terms and Conditions.pdf 119.5K 1 · Share on FacebookShare on Twitter Comments edburton6801 ✭ September 2 I made my submission yesterday :-D  ... how can I see it? 0 · Share on FacebookShare on Twitter LandShark admin September 2 @edburton6801 Once it's been approved, you'll find your build on our Build showcase! https://www.microcenter.com/search/builds.aspx 0 · Share on FacebookShare on Twitter Zwarrior972 ✭ September 3 Hi! Was wondering when you'd announce winners for the last 2? 0 · Share on FacebookShare on Twitter LandShark admin September 3 Hello, @Zwarrior972 We'll announce the winners as soon as they've confirmed that they can claim their prize. 😊 0 · Share on FacebookShare on Twitter LastFoodBender ✭ September 3 Does voting start on 9/18 when top 5 are chosen to see who will be winner or is there a way to vote now on who people think should advance as top 5? 0 · Share on FacebookShare on Twitter LandShark admin September 4 @LastFoodBender Voting will start when we announce the top 5 submissions on the 18th! We'll create a new discussion where you can vote on your favorite. Voting will close on the 25th. 0 · Share on FacebookShare on Twitter sc0ttydont ✭ September 10 Just submitted! Good luck to everyone!! I'm looking forward to seeing those amazing builds out there.  1 · Share on FacebookShare on Twitter EGLD ✭ September 15 Is there a way to update your submission? 0 · Share on FacebookShare on Twitter Iamjoshchampagne ✭ September 15 Where does the voting take place? I shared my build with people and they are telling me there is no option to vote I am confused... 0 · Share on FacebookShare on Twitter DreadPirateRoberts ✭ September 16 If I read the post right they'll be creating a new post with the top 5 for you to vote on later in the week. We will announce the top 5 on 9/18 and a link to the top 5 submissions will be posted in the main thread. Voting will close on 9/25. Until that time, you'll be able to vote for your pick of the top 5.  0 · Share on FacebookShare on Twitter mmiller2 admin September 18 Hey everyone! Thanks for all the great submissions! Vote for your favorite here: https://community.microcenter.com/discussion/4827/september-showcase-contest-vote-for-your-favorite  0 · Share on FacebookShare on Twitter LastFoodBender ✭ September 21 If you don't win in a pc build contest can you enter again in the next one? 1 · Share on FacebookShare on Twitter TSTonyV admin September 21 LastFoodBender said: If you don't win in a pc build contest can you enter again in the next one? A build can be re-submitted in a possible future contest provided that at least one component has been changed.  1 · Share on FacebookShare on Twitter Leave a Comment BoldItalicStrikethroughOrdered listUnordered list Format Heading 1Heading 2 QuoteCodeSpoiler Emoji Url Image Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights Drop image/file Home • Announcements, News & LaunchesComment As ... Community Article View Badge: Name Dropper — Micro Center Name Dropper Mentioning someone in a discussion (like this: @Name) is a great way to encourage dialog and let them know who you’re talking to. 440 people have earned this badge. Most recent recipients Ty0 November 29 _ben_ November 27 Timetable2 November 27 Mochi November 27 Lorpadao November 27 Tonkaz November 26 Alex_M89 November 25 dyelun November 25 Ryuk340 November 25 Charlie27 November 24 VenomousDemon November 24 WalkerTM November 24 KidCookie November 24 Mechrothatcher November 24 karldoosh November 23