Showcase Your Custom PC.
Breadcrumbs
Builds
Advanced FiltersSpecial Offers / Advertisements
Compare up to 4 items
New list of matching projects
-
Little Champ Little Champ
Built this pc as a tiny upgrade from my last one. The main reason I built this was because I wanted something smaller that I... Built this pc as a tiny upgrade from my last one. The main reason I built this was because I wanted something smaller that I could use in the living room when I decide to do another higher end build. I really don't do anything crazy when it comes to games anymore, I think the most intensive game I play is still Forza Horizon 5. So with that all in mind, I decided on all of these parts for a smooth 1440p experience. I still debate if I want to make an upgrade to a 5800x3d, but I'm not sure it will be worth it knowing I won't be upgrading anything else in this pc. The CPU and GPU seem to work great together and everything remains cool and quite how it is.$951.82 -
The Max Powerhouse The Max Powerhouse
This my current general purpose gaming PC. This is my first PC build in 10 years and first SFF PC. Its a powerhouse and the... This my current general purpose gaming PC. This is my first PC build in 10 years and first SFF PC. Its a powerhouse and the best PC I've built to date. I play CS2, Diablo 4, Lost Ark, Black Desert and mostly anticipating and excited for Black Myth Wukong. I plan on upgrading to 7900 XT in the near future so then I won't have to upgrade for years to come. This build was super easy for an SFF ITX build because it came with PSU and custom AIO bundle so I didn't have to think about which of those two parts to buy. Even though it was fairy easy it did take me quite some time to finish the build because I wanted to make sure everything was right. I've had to take the PC apart many times and initially I thought it was going to be a pain because of the size but its actually super easy to service as all the panels come off. I've actually changed parts a few times and added custom cables so I had to make many micro adjustments so it gets easier and faster each time. One small "mod" I did to fit the bottom thick 28mm 120mm fans on the bottom was I had to elevate the GPU and to do that I added 4 6-32 nuts and 3/4" screw. It adds about 10mm in height giving it just enough clearance to fit the fans. I hope everyone enjoys this build as much as I did!$1,658.37 -
Ava Ava
To have something cool to start at while I am sitting at my desk, more efficient desktop for working and gaming To have something cool to start at while I am sitting at my desk, more efficient desktop for working and gaming$1,304.65 -
Team Red Team Red
Upgraded my PC from a 5700XT to 6800XT and loving it. The frame rate increase is amazing over the 5700XT. Next upgrade I'm... Upgraded my PC from a 5700XT to 6800XT and loving it. The frame rate increase is amazing over the 5700XT. Next upgrade I'm looking to get a 5800X3D$1,549.96 -
New Home Machine New Home Machine
This is a new home machine to replace my venerable but arthritic 3rd Gen i7. The old machine was a Shuttle SZ77r5 with 32 GB... This is a new home machine to replace my venerable but arthritic 3rd Gen i7. The old machine was a Shuttle SZ77r5 with 32 GB of RAM and an i7-3770k with an EVGA NVidia 1650 (the only part that has survived into the new build). The new machine is quite an upgrade, with an i7-14700 and 64 GB of RAM, Two WD black 850x SSDs running NVMe (2TB and 4TB), all housed in a Phanteks Evo Shift XT case, cooled with a Cooler Master 240 Atmos ARGB AIO. The new Case is an even tighter fit than the old Shuttle case, though longer and taller. The case has a nice solid feel though it's not great for travel. I'm happy that it comes with a front USBC and USB3.1 port. Unfortunately the integrated color selector and mode switches running off the integrated infinity panel, don't talk to the ASRock RGB controller and are just overridden by it, so no front panel button control for lighting unless I dump the MB integration. Securing the Micro-ITX board required tweezers and patience to line up everything, particularly on the bottom, and some of the CPU and Fan headers end up right at the bottom of the case since the MB ends up almost upside down, making it a challenge to connect them after mounting the board. I'm fairly happy with the cable routing otherwise, though I do wish the bottom of the Phanteks chassis (it sits inside the Aluminum outer case) did come apart for easier access, but it is unfortunately riveted to the chassis elements instead of screwed in. It would also be a nice place to mount a fan at the bottom of the case, and it would provide welcome access to the 'top' of the MB for all the FAN headers and mounting screws. But I'm satisfied overall. I do plan to upgrade the graphics card (Christmas maybe), but this is much more of a general purpose DEV/IT Admin/Home PC and I don't game much so it's not that pressing to me. Right now I use it to support a number of Virtualbox VMs and for personal development work.$1,732.94 -
Woodinator 5000 A.K.A. CYBERWOOD... Woodinator 5000 A.K.A. CYBERWOOD Structure Fire Starter
I’ve always wanted to build a PC case made of wood. I’ve sketched designs, browsed Reddit, and became determined to make it... I’ve always wanted to build a PC case made of wood. I’ve sketched designs, browsed Reddit, and became determined to make it a reality. I stumbled across a MATX CYBERWOOD case, but to be completely candid, I was not impressed with the design, look or layout of the case. Plus, who uses acrylic side panels these days? I dismissed it, and forgot about it, until I found out CYBERWOOD released another case – this time an ITX case called the M1. However, the original cost seemed excessive for what it was, so I decided not to buy one. Fast-forward to January of 2024, and Amazon suggested the M1 case when I was browsing other SFF cases. Some how I was able to pick up the case bundled with a gen 3.0 riser cable for $37.65. I purchased one immediately, without a plan or knowing what I should do with it. I have an older ITX system (it runs PLEX and a NES emulator) that I originally decided to transfer into this case, but after I started the build, I realized the parts doesn’t do this case justice. It’s unique, special and pretty cool. My photos show how I started the build with these older parts but swapped them for more powerful hardware. To be clear, building in this case is work, but that’s OK, because it’s not annoying – it’s just oddly satisfying. Assembling every part is time consuming, and making everything fit can be a challenge. Parts that ought to fit don’t, and I had to be creative with cable management. I had to make a notch in the wooden power supply bracket to accommodate the switch. The case comes with filter panels, but they have to be attached with the included white tape - after you have finished the case. I ran into an issue with my BeQuiet! 120mm AIO, because the pump is designed to hang freely in the case, without contacting anything. It if does make contact with something, the pump makes a loud and obnoxious vibrating noise. So, I ordered an AIO with the pump built into the block. The Intel i5-12600KF processor is rated for 125 TDP, so most low-profile air coolers will struggle to keep it cool. I tried a Noctua NH-L9x65, but temps were all over the place and the fan contacted the side of the case – which caused it to vibrate and make excessive noise. I tried a Scythe low-profile cooler (with a height of 55mm), but it had to work hard, so the 92mm fan was always running at full speed. So, I ordered a 240mm AIO to keep up with the 12600KF. I also had to order the CYBERWOOD top expansion bay to accommodate the radiator. I had a used AMD 5700 XT on hand (purchased for $130.41) to upgrade my son’s gaming computer but decided to use it for this build, instead. It fits perfectly in the case – it’s 315mm and there is room for airflow. I had to order a gen 4.0 riser cable to get the most out of it, but the price was reasonable. The case does not come prefinished. I spent an afternoon applying 3 coats of polyurethane finish to the wood panels, and lightly sanded between coats. It’s ¼ inch plywood and needs to be protected. I’ve seen CYBERWOOD cases that were stained, but this takes away from the wood’s natural beauty. I highly recommend leaving it raw and just using wood sealer to protect it. I would build in this case again, but I don’t know if CYBERWOOD is still making this case. It appears out of stock on Amazon, but Newegg still has it listed. However, it’s priced between $125.99 and $226.99! I appear to have lucked out, when I found it for this price, and I plan to use, upgrade and enjoy it – as long as it doesn’t start a structure fire. The total build cost was about $849.83.$828.60 -
hot wheels pc gamer! hot wheels pc gamer!
a gaming computer in a hot wheels pc case a gaming computer in a hot wheels pc case$2,308.95 -
Home Media Server Home Media Server
This build serves as a media server for my family and I, which gives us access to all of our photos and videos, along with... This build serves as a media server for my family and I, which gives us access to all of our photos and videos, along with our Plex library.$621.96 -
Really small pc Really small pc
My really small pc with the great airflow case My really small pc with the great airflow case$2,734.95 -
White Themed Compact Lian Li Q58 Build White Themed Compact Lian Li Q58 Build
Wanted to build a PC that could play some games at 1440p and this did the job! Got some of the parts used, such as the GPU,... Wanted to build a PC that could play some games at 1440p and this did the job! Got some of the parts used, such as the GPU, CPU, and case, but the rest were bought new from Amazon (should have been MicroCenter) Overall it has been amazing!$705.95 -
Herika Herika
It was built primarily to run ai models for the skyrim vr mods herika and mantella. It is also used as a portable gaming pc... It was built primarily to run ai models for the skyrim vr mods herika and mantella. It is also used as a portable gaming pc to show people vr with a vive pro 2, index controllers and tundra trackers. Vrchat/blade and sorcery mostly.$1,828.94 -
Endgame ITX Build Endgame ITX Build
This is the perfect ITX build. I have moved a lot of PC parts and upgraded but this is the final upgrade. This gaming PC can... This is the perfect ITX build. I have moved a lot of PC parts and upgraded but this is the final upgrade. This gaming PC can tackle any 1440p game with no issues and can also compute anything for my work needs. The 5800x3d is the best CPU from AM4 to keep all my frames steady and the 3080 pushes those frames. I know I couldve gotten 'better' components but for the budget, these 2 were the best I can get comfortably without feeling guilty. The PC has no rgb but that's what I like. I wanted to keep it all black (GPU has a little bit of RGB but it's very subtle which is fine). Furthermore, routing the cables in the PC was a breeze due to the SF750's cables being sleeved so bending it was no issue at all.$1,689.95 -
-
-
Budget Gaming PC Budget Gaming PC
Budget Gaming PC build with older hardwares. Budget Gaming PC build with older hardwares.$559.94 -
NR200P SFF All White Build NR200P SFF All White Build
Built this for my daughter for general purpose use. Eventually may add a GPU if she gets into PC gaming. Built this for my daughter for general purpose use. Eventually may add a GPU if she gets into PC gaming.$856.93 -
ITX Portable Build ITX Portable Build
Main focus was portability as I was moving around a lot at the time. It was mostly used for gaming and school work. Main focus was portability as I was moving around a lot at the time. It was mostly used for gaming and school work.$1,462.95 -
$650 Gaming PC $650 Gaming PC
I tried to build a budget gaming PC for all my broke homies out there. This PC is optimized for gaming, but has decent specs... I tried to build a budget gaming PC for all my broke homies out there. This PC is optimized for gaming, but has decent specs for other purposes as well.$663.93 -
The orangeinator The orangeinator
Couldn't find a ps5 so I decided to try to build a pc, and after a few iterations, upgrades and way too much money I'm now... Couldn't find a ps5 so I decided to try to build a pc, and after a few iterations, upgrades and way too much money I'm now sold on pc gaming. I made this computer over time wanting to keep it smaller while also running cool and quiet$1,339.94 -
Vault-Tec in a Box Vault-Tec in a Box
This was built to use on my theater screen. I play all types of games but since this is a projector I did not need the best... This was built to use on my theater screen. I play all types of games but since this is a projector I did not need the best of the best rig. But did want to have some power for the small form factor.$1,829.92 -
Back-home Build - Custom FormD T1 Back-home Build - Custom FormD T1
I built this after traveling for work for a while and wanting a small set-up for my small home office. It's primarily for... I built this after traveling for work for a while and wanting a small set-up for my small home office. It's primarily for gaming but can also handle light productivity work just fine, so ideal for my needs.$2,627.95 -
Slicer Slicer
Made for gaming mainly but also general variety of tasks, including streaming movies and TV shows, browsing the internet,... Made for gaming mainly but also general variety of tasks, including streaming movies and TV shows, browsing the internet, and occasionally working on documents and spreadsheets.$2,586.94 -
ITX Build ITX Build
Used as playstation replacement. May switch psu to itx to fit more fans. Used as playstation replacement. May switch psu to itx to fit more fans.$1,199.93 -