Showcase Your Custom PC.
Builds
Special Offers / Advertisements
Product Results Pagination
1 - 24 of 14196 items
Sort by:
Items per page:
Compare up to 4 items
New list of matching projects
-
SATA Modified Prebuilt II SATA Modified Prebuilt II
This system originally contained an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. The first upgrade... This system originally contained an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. The first upgrade was the graphics card, then I added another SSD and a HDD along with a SATA PCI-Express add-on card. I had to get the add-on card because there wasn't enough ports on the motherboard.$0.00 -
i5-2500k i5-2500k
Primarily gaming. Held up surprisingly well over the years, only started to show its age just before COVID hit, then prices... Primarily gaming. Held up surprisingly well over the years, only started to show its age just before COVID hit, then prices went berserk so I've managed to coax a couple more years out of it to let all the dust settle. Will probably replace it next year with something like the 7800x3D or maybe Meteor Lake.$0.00 -
Box Box
Wanted to make a case out of wood settled on mAtx form factor and a close to cubic design in order to pull it out of one... Wanted to make a case out of wood settled on mAtx form factor and a close to cubic design in order to pull it out of one sheet of 2’x4’ ply all while grain matching🤓. The design is more akin to a test bench setup in how the board is oriented. There is drawer to house one HDD and two SSDs though I only have one currently. The cables nicely dive down into the underside of the cabinet. The entire system is air cooled with 6 case fans 2 in on left 2 out on right and in on top and front to have positive pressure… the top hole is almost perfectly aligned with cpu… (missed measurement… womp womp. As can be seen it comes with led power and reset buttons the reset led is wired to hdd activity for a neat effect. And finally a full usb2.0/3.0/sdcard reader/audio in out 5.25” bay adapter that I’ve secured in place. While I was very excited to have constructed it to be double hinged I kind of regret it in how it makes the setup awkward… once done however it’s nice and I doubt I’ll have to get in there again. I have some thoughts as to where I’d like to go with the next itiration… let me know what you think!$0.00 -
Modified Prebuilt Modified Prebuilt
This system contains an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. It originally came as a HP envy... This system contains an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. It originally came as a HP envy 750 prebuilt, but I upgraded the graphics card to a EVGA GeForce GTX 1070 black edition.$0.00 -
Old School nVidia 3D Vision / 3D... Old School nVidia 3D Vision / 3D Surround - "2 computers in One" small case
This is my Old School nVidia native 3D Vision / 3D Surround computer. I still love playing fps in stereoscopic 3D, on this... This is my Old School nVidia native 3D Vision / 3D Surround computer. I still love playing fps in stereoscopic 3D, on this computer, that i believe I built 10+ years ago. It has an i7 960 Intel CPU, 8GB Ram, and dual 16x SINGLE slot pci-ex slots (not 8x / 8x). I boot to 32 bit Win XP with the GS7600 nVidia videocard on a 21" Viewsonic 120hz CRT monitor and H3D wired shutter glasses. I also dual boot into 64bit Win7 Pro with the GTX690 nVidia videocard on 3 Acer X1261P 3D projectors for a total screen size thats 15 feet long (resolution is 3072 x 768). I replace the proprietary 500watt power supply with a Thermaltake one and the "Ice cooler", which is also Shuttles proprietary cpu cooler with a Zalman. I play (in glorious 3D) the original Dead Space 1,2, & 3, Tomb Raiders, Max Payne, Painkiller type games.$0.00 -
xerocool xerocool
I built this pc for playing COD, with friends, I tried to balance power and appearance. I wanted to make something you... I built this pc for playing COD, with friends, I tried to balance power and appearance. I wanted to make something you cannot just go out and replicate. I am hoping to upgrade the graphics to a 3090 soon.$0.00 -
Custom Meshlicious 9x HDD Plex NAS... Custom Meshlicious 9x HDD Plex NAS unRAID Server
Started using Plex for streaming personal media a year ago and filled up the 8TB external HDD pretty quick! Figured this was... Started using Plex for streaming personal media a year ago and filled up the 8TB external HDD pretty quick! Figured this was the perfect opportunity to get into the world of servers. I wanted something that was SFF, dead silent, had plenty of HDD bays, and still looked good to set on my desk. Didn't like the look of the Node 304 or NR200 but when the SSUPD Meshlicious came out, I knew I could make it unique and exactly what I wanted. Decided to upgrade my gaming rig (2020 Build) during this process and use those parts for the server or buy used. Server GPU was omitted since I have my own gaming rig which can handle heavy duties if necessary. Check out both rigs in the last photo! Using unRAID has been a great choice of server OS and an amazing learning tool to get into servers! Since it's used primarily for Plex by my family, drives are spun down most of the time. Plex libraries are split up into different drives allowing for a single HDD spin up at a time depending on the movie/show. The system remains dead silent, even when 1 or 2 drives are in use. Thermals are a non-issue. Even during 24-hour data transfer to all drives at once, HDDs never hit above 38 degrees. Plex use is 30 degrees. Incredibly happy with the way it came out and couldn't recommend the SSUPD Meshlicious enough as an insanely versatile and beautiful SFF case.$0.00 -
Modified Prebuilt and Router Modified Prebuilt and Router
This system originally contained an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. The first upgrade... This system originally contained an i7 6700 with 8gb of memory, a 1tb hard disk drive, and a 128gb ssd. The first upgrade was the graphics card, then I added another SSD and a HDD along with a SATA PCI-Express add-on card. I had to get the add-on card because there wasn't enough ports on the motherboard. Added a router to improve coverage.$0.00 -
-
-
Every Corner Cut Every Corner Cut
Basically, I made almost my entire system except for CPU, GPU's and their GPU blocks, 13 cheapo fans, 2 molex connectors and... Basically, I made almost my entire system except for CPU, GPU's and their GPU blocks, 13 cheapo fans, 2 molex connectors and a few fittings out of second hand / repaired items. The sound system was also repaired, and cost me a fraction of MSRP and I used my car audio hobby to my advantage. Focal Shape 65 were $320 total after repairs and the subwoofer was $40 and cost almost nothing for me to repair. Frequency response is 24Hz-35,000 Hz This build is all about one thing: Price to performance ratio. My 3090 actually costs more than the rest of parts in the pc and my entire living room combined. Took a long time to save up for the new GPU but because of the pandemic, I decided to max out this platform by getting that last part I needed, and now in order to upgrade, I need a whole new platform :D$0.00 -
The Frankentosh The Frankentosh
PC guts inside of a MacPro case…This was built to host my security cameras and home media. It has since turned into a 2nd PC... PC guts inside of a MacPro case… This was built to host my security cameras and home media. It has since turned into a 2nd PC for streaming and running other media in the background while I game. Trying not to alter the case too much, I searched around to find components that would work. In the end I ended up trimming the back panel to work with the mobo ports, cutting a hole to pass the power cables through the top shelf to the rest of the PC, installed my own stand-offs and mounting plate. And let’s just not talk about the CPU radiator being held in by zip-ties.$0.00 -
4790K/GTX 970/16GB DDR3 - 2014 4790K/GTX 970/16GB DDR3 - 2014
An oldie but a goodie. Built in 2014, this PC has lived for 10 years doing tasks such as gaming, media center, and general... An oldie but a goodie. Built in 2014, this PC has lived for 10 years doing tasks such as gaming, media center, and general purpose. I sometimes still can't believe I made it last 10 years. Most people would've upgraded by year 3, but I never really found a reason to do a full rebuild. It's now 2024 and it is showing its age especially after purchasing an ultrawide monitor. Retirement might be on the horizon, but I truly think this still has some life. It probably won't be gaming or intense work, but it'll be an awesome web browsing/video streaming PC.$0.00 -
Micro-ATX motherboard in Mini-ITX SFF... Micro-ATX motherboard in Mini-ITX SFF case capable of some mild gaming with Ryzen 5000g series CPUs.
I had an old Mini-ITX case which I turned into a desktop computer with potentially some gaming capability. To accommodate... I had an old Mini-ITX case which I turned into a desktop computer with potentially some gaming capability. To accommodate newer Ryzen 5000 series CPUs I selected a small Micro-ATX motherboard ($38 shipped off eBay) ASRock B450 B450M R4.0 and fit it in a tiny case. Currently it is powered by AMD Ryzen 3 2200g CPU. I paired it with 16GB DDR4-3200 memory, Intel 240GB SSD drive and 2TB WD hard drive. The plan is to add a M2 ssd drive and a MicroCenter's Ryzen 5600g or 5700g CPU. Maybe later add even a discrete graphics card. At the moment the build will be used for general purpose computing with some occasional gaming (per my son's request).$0.00 -
30 year old HP vectra 486/33N gaming... 30 year old HP vectra 486/33N gaming build
Bought in 1993 and subsequently added parts inside it this ancient “gaming rig” is still up and running… with dos games Bought in 1993 and subsequently added parts inside it this ancient “gaming rig” is still up and running… with dos games$0.00 -
My First Build My First Build
Started out telling myself I was gonna make a computer that was just good enough to play warzone, that changed very quickly.... Started out telling myself I was gonna make a computer that was just good enough to play warzone, that changed very quickly. All I want to do is keep adding. Great hobby and one I definitely see myself staying in for the future. Cooler Master H500 case Powerspec 850 rgb supply MSI B550 gaming plus mobo Asus RTX 3080 GPU 2x western digital 1TB ssd m.2 M22 kraken cpu cooler Ryzen 5 3600 Matisse 2x 120mm blue case fans 2x 140mm red case fans Inland black/red cable extension kit 2x 8gb trident 3600 RAM Cooler Master GPU RGB support bracket *** soon to come EK GPU waterblock setup$0.00 -
My first pc build! My first pc build!
This is mostly a gaming rig (for 1080/1440p gaming), but I also used it for school and editing photo. This is mostly a gaming rig (for 1080/1440p gaming), but I also used it for school and editing photo.$0.00 -
Chrome Dome #bitwit Chrome Dome #bitwit
3 years and 4 iterations later (as seen in the last few photos). I don't plan on changing anything for a while after this. I... 3 years and 4 iterations later (as seen in the last few photos). I don't plan on changing anything for a while after this. I chose this case because I liked the unique layout and I knew the watercooling obsession would eventually lead to hardline tubing. So I wanted a cheap case that would force me to be creative with the design and whip out the Dremel for a custom fit. It did not disappoint. I also purchased some cut glass from the hardware store, painted the edge, and mount it using magenetic strips to use as my side panel. The decision to finally go hardline was a used Gigabyte Aorus Z390 Master for $180 and EK's FLT reservoir/pump combo. Everything was bought used or very discounted, except for CPU, fans, and anything regarding watercooling. It was a fun challenge that I am glad is over and thankfully, stayed dry. 3D modeling prior was critical and thanks to every gamer/enthusiast for inspiration! Hope you guys like it and feel free to ask any questions! Primarily used for gaming, general purpose, engineering, and 3D modeling. Specs: Case: Thermaltake Core G3 CPU: Intel i5 9900k 5.1Ghz @ 1.3v delidded w/ liquid metal & copper IHS GPU: MSI RTX 2080 Ventus OC 2.010Ghz @ 1.0V MOBO: Gigabyte Aorus Z390 Master RAM: Team Group Vulcan 4x8gb 3000Mhz PSU: Corsair SF750 Platinum w/ Noctua NF-A9x14 fan swap OS: Samsung 960 Evo 250gb M.2 NVME Games: Silicon Powered 1TB M.2 NVME External: Seagate Backup Plus Hub 8TB Monitor: Pixo PX275h 1440p @ 95hz Cooling: CPU: EK-FB Gigabyte Z270/Z370 Monoblock GPU: EK-FC 2080 Classic Waterblock Rads: EK-CoolStream SE 360 & XSPC TX240 Pump/Res: EK-Quantum FLT 240 DDC PWM Water Temp: Phobya Inline Temp Sensor Intake Fans: 5x Arctic P12 PWM PST w/ Phanteks Lux Halo RGB Exhaust Fans: Noctua NF-A12x15 & 2x Arctic P8 PWM PST EK Fittings w/ 14mm Bitspower Chrome Tubing Temps: Low fan curve for silence. Prime95 & Heaven 4.0 for 60min: CPU 72C | GPU 51C | Water 50C Red Dead Redemption for 60 min: CPU 61C | GPU 48C | Water 43C$0.00 -
Free Forever Free Forever
A build i tossed together using parts from friends and family that I did not have to pay for A build i tossed together using parts from friends and family that I did not have to pay for$0.00 -
Termination Rig Termination Rig
I9 9900KRtx 30802 TB SSD64GB RAM I9 9900K Rtx 3080 2 TB SSD 64GB RAM$0.00 -
-
Borg Cube Borg Cube
My case mod takes us to the world of ST:TNG and the Enterprise's most fearsome enemy introduced in the second season of the... My case mod takes us to the world of ST:TNG and the Enterprise's most fearsome enemy introduced in the second season of the series. The case I modded is the Cooler Master Elite 110. The inside components comprise a basic gaming rig, with a nod to the era that ST:TNG was new on the air by using the 20th anniversary Intel Pentium processor. My case mod even includes a "frickin' laser beam" in eerie Borg green of course.$0.00 -
Audio and Gaming Setup Audio and Gaming Setup
I’ve been building SFF for almost 8 years now. My favorite case has always been the NCASE M1 which easily worked for most... I’ve been building SFF for almost 8 years now. My favorite case has always been the NCASE M1 which easily worked for most gaming builds until the last few years of hardware. Once I snagged a 3090 FE it was time for a new case. After a bit of research, I decided to buy a Sliger S620 which is basically a bigger NCASE M1 with a handle option. The build quality is great but I prefer the anodized aluminum of the NCASE. Part choice was easy, not a ton of options for SFF builds. I decided on the U12A over the D15 as the U12A lags only a few degrees while having a much nicer sound profile. The PC is extremely quiet during gameplay outside of the GPU coil whine. The 3090 FE has easily the worst coil whine I’ve ever heard out of the box. Coil whine is one of the reasons I got out of water cooling as the noise floor is always tainted by the awful whine every card seems to have now. A slight undervolt helps but it’s still there. Airflow is setup for bottom and back intake and exhausting everywhere else. I tried the case flipped once but the GPU temps weren’t great for me. Doom Eternal with everything maxed at 4k 120hz sits around 71-72c for both the CPU and GPU. Overall, pretty happy with the case and build.$0.00 -
Ryzen 3 2200G HTPC Ryzen 3 2200G HTPC
I've been using this build for a few years for the kids of watch Youtube on TV and to video chat with family members. I've been using this build for a few years for the kids of watch Youtube on TV and to video chat with family members.$0.00
