Builds

New list of matching projects

• 

  AMD Budget Build by Bryan AMD Budget Build by Bryan

  I mostly play first person shooter games like GTAV/FiveM and other games that this PC could run is Fortnite, Warzone Forza... I mostly play first person shooter games like GTAV/FiveM and other games that this PC could run is Fortnite, Warzone Forza etc.

  $567.93

  Bryan M

  0

  0
• 

  RYZEN NAS RYZEN NAS

  Low power 24h multi application server Low power 24h multi application server

  $1,371.32

  sd159

  0

  0
• 

  jerams pc jerams pc

  i really like this pc because i build it with the help of my friends to get the best gaming experience, it costed me too... i really like this pc because i build it with the help of my friends to get the best gaming experience, it costed me too much money but its good PC and i will use it for my new gaming setup

  $1,074.27

  isa h

  0

  0
• 

  Ryzen 9 3900XT/Radeon 5700XT Ryzen 9 3900XT/Radeon 5700XT

  The PC I ended up with after a few upgrades over the years. For general usage, some gaming. I wish I had more games to play... The PC I ended up with after a few upgrades over the years. For general usage, some gaming. I wish I had more games to play but most modern games are either absolute trash that isn't worth playing or indies that are worth playing but don't require much in the terms of power. The 3900XT I got on sale after the 5000 series came out, works well, cooled by a Noctua NH D15. Should I have waited to get a 5950X? Maybe, but I don't need that much. 32GB of ram, surprisngly I regularly use around 24GB of it so I'm glad I went over the 16GB I usually default to. The motherboard is alright, it works. The 5700XT has to be the centerpiece, I replaced the original cooler with a Raijintek Morpheus II and two Noctua fans. Never goes below 55c even during full load and is always silent. A much better experience compared to when the fan bearings were worn to the point of buzzing from casual mining for a few years. Despite the drama surrounding crypto this 5700XT has heated my room during the winter and put food onto the table for the past two years. Can't complain about that. The PSU I'm glad I went a little overkill initially. When I got this I had a Ryzen 5 1400 and an RX560, something that could probably be powered by a 450W unit. However now it's still got plenty of extra for further upgrades. The case is a Corsair 275Q. It's not very quiet and difficult to work in. I would have rather bought a quality test bench with this money. I need lots of hard drive space.

  $1,860.89

  MKondo

  0

  0
• 

  From When Prices Were Decent Gaming From When Prices Were Decent Gaming

  Budget gaming build of 2020 Budget gaming build of 2020

  $2,218.92

  pyrog

  0

  0
• 

  Daily driver Daily driver

  Mostly use my build for office work, browsing, some gaming such as Elder Scrolls online, and virtual desktop for VR Mostly use my build for office work, browsing, some gaming such as Elder Scrolls online, and virtual desktop for VR

  $1,553.91

  sal12345

  0

  0
• 

  I don't have one. I don't have one.

  I built my pc mainly for gaming. I play Valorant, Csgo, Minecraft, and Osu. I built my pc mainly for gaming. I play Valorant, Csgo, Minecraft, and Osu.

  $1,234.98

  Evann L

  0

  0
• 

  Alphonse Alphonse

  Built it for gaming and productivity originally but mainly use for school now. Runs pretty much anything with no issues. Built it for gaming and productivity originally but mainly use for school now. Runs pretty much anything with no issues.

  $1,554.95

  Mateo D

  0

  0
• 

  Neo Tokyo Neo Tokyo

  This is my first build, made with the intention of running all my favorite games in 2K and 144 Hz. Used for Rocket League,... This is my first build, made with the intention of running all my favorite games in 2K and 144 Hz. Used for Rocket League, Halo, Cities Skylines, Terraria, Arma, Valheim and more. It includes a 3D printed accent to hide the mobo i/o and complete the edgy look.

  $1,824.94

  Sam V

  0

  0
• 

  Cyberhawk 2019 Cyberhawk 2019

  My first PC build from 2019, all bought at Microcenter! My first PC build from 2019, all bought at Microcenter!

  $1,024.86

  Transflection

  0

  0
• 

  1440p mid range 1440p mid range

  Plays games well at 1440p, wouldn't have to upgrade for a while. Plays games well at 1440p, wouldn't have to upgrade for a while.

  $1,319.94

  Eric Z

  0

  0
• 

  1 1

  Finally upgraded after an 8 year run with my old 3770k. Feels good. Finally upgraded after an 8 year run with my old 3770k. Feels good.

  $1,478.93

  Britton L

  0

  0
• 

  Radio's Sleeper Build Radio's Sleeper Build

  I have been wanting to do a sleeper build for a while, but when I initially looked at the cases I had to choose from, I... I have been wanting to do a sleeper build for a while, but when I initially looked at the cases I had to choose from, I realized that I'd have to put in some elbow grease and I got deterred. 2 years later and I decided to fully commit on the idea! The most annoying part about the build is definitely the cooling; I cannot run the PC with the side panel on if I'm doing any amount of gaming as the air intake and outake between the two fans are just not good enough for it to cool the system. Had to dremel out the back of the case (similar to https://i.imgur.com/NN9qdhg.jpeg), preparing the case was a bit of a mess but it worked out in the end! I do have an unorthodox cooling setup as the back fan mount was a weird size. However, the stock fan on the stock cooler of the 5600X fit perfectly! I unfortunately broke the plastic that was keeping it connected to the AMD shroud that surrounds it, so I can no longer claim warranty on it at Micro Center. I had to drill holes in the metal portion in the front of the case (behind the plastic cover that goes over front I/O). I also had to drill holes in the Gateway piece that attaches to that cover so that air flows through it slightly better. I also had to buy a 3.5" to 5.5" adapter to mount my HDD inside the PC. I tried 3D printing out a mount but it did not screw into the piece so I bought a $5 adapter from Amazon. It gets the job done, but I had to use the black front piece that covers it as opposed to the original PC case piece, as the original juts out enough to where it does not fit.

  $1,466.92

  RJ S

  0

  0
• 

  FIRST BUILD FIRST BUILD

  WHATEVER I WANT TO DO IT CAN DO WHATEVER I WANT TO DO IT CAN DO

  $1,413.92

  JOSH T

  0

  0
• 

  Terror Storm #MicroCenterMadness Terror Storm #MicroCenterMadness

  Build the pc recently after my old rig died and I've upgrade to what is my baby today. My rigs plays games from 1080p,... Build the pc recently after my old rig died and I've upgrade to what is my baby today. My rigs plays games from 1080p, 1440ps and even 4k on certain games. Games I play are Call of Duty Black Ops Cold War, Apex Legends, Fortnite, Cyberpunk 2077, Doom Eternal, Witcher 3, etc. You name it, it can play it This is my personal gaming rig and I'm a computer technician who enjoy building pc for family, friends, clients or anyone who want either a gaming, workshop or personal rig. My cpu, gpu, ssd and rams are from micro center -- new out the box. Most my parts and hdds were bought from Amazon on sales. Dont be afraid to buy from Amazon, some to most of their parts are good and great alternatives from big name brands products ( corsair, evga, coolermaster, etc....)

  $2,075.90

  christo25

  0

  0
• 

  Kangster’s Build Kangster’s Build

  I built this pc recently end of 2020 I decided I needed a new computer instead of this 2012 laptop I have been using for 2... I built this pc recently end of 2020 I decided I needed a new computer instead of this 2012 laptop I have been using for 2 years

  $1,519.92

  joseph k

  0

  0
• 

  The Chimera #MicroCenterMadness The Chimera #MicroCenterMadness

  The Chimera is a powerhouse machine designed to be both an aesthetic statement as well as fully functional for streaming... The Chimera is a powerhouse machine designed to be both an aesthetic statement as well as fully functional for streaming whatever games I want to stream. It was given the name Chimera as a suggestion from a viewer that was watching me upgrade the cooling loop on Twitch. The original name of this system was the Kraken. For me monsters and demons are part of my theme thus every one of my personal builds will be named after some sort of "dark" creature. This is currently version 2.0 of this build as I have learned and tried new things. I started out with a kit that I got from Alphacool with a Laing DDC pump and single 360x30mm radiator that I had expanded to two of as well as the Helix reservoir and the V2 DPP 755. Version 1.5 as described is what I had been running for my cooling for the last year. I decided that since I had to take everything apart for the one year cleaning event that I might as well take the opportunity to go ahead and upgrade the loop as a whole. There was a leak that occurred during my first build iteration that caused the RGB lighting in the GPU block to short out, which is something that is getting fixed at the beginning of April. I'm also taking that opportunity to drain the loop and make the loop order a little more efficient. This has been my first liquid cooling loop, and I chose this particular case to build into because of the unboxing video JayzTwoCents did on it. One of the biggest issues I had when it came to the upgrades I've done on the loop thus far was the pressure of the loop itself. In one iteration I considered I was going to have an Eisball pump/res combo but that ended up getting scratched. While I love everything about this build once I got everything working and without any leaking I realized a few things I could have, and will be doing differently as I already have the parts needed on order. First some extra 90º fittings, one of which will be getting placed on the bottom of the reservoir with a 10mm extension. From there I'm going to take the quick disconnect from the bottom radiator and move it to the pump with the black top's out port with a 90º fitting while taking another 90º fitting and putting it on the acrylic top pump with a direct downflow into the bottom radiator. I realized this should have been done solely for the purpose of being able to remove the bottom and front rads with the pumps and reservoir still attached without having to drain either one after taking a good long hard look at the loop order. Along with replacing the RGB strip in my GPU block I will be replacing the stock Red Devil backplate with one made by Alphacool and adding a 45º fitting on the end of the port that it fills the top radiator thru allowing a shorter run there as well. I'm switching the in/out ports on the back radiator and rerouting the connection between the two radiators to go around the quick disconnect on the reservoir while also adding a final quick disconnect to the front radiator allowing both radiators to be removed without having to drain the loop, if need be. The backplate replacement is only to help clean things up in the look. Other little additions are the 90º 24-pin ATX and two 8-pin 180º PCI-E power adapters and the LinkUp PCI-E Gen 4 riser cable. The first few photos are the original layout I attempted a year ago with the kit I bought from Alphacool, followed by the final layout once I got the Helix res and D5 pump. The third photo is of an iteration I had considered using the Alphacool Eisball pump/res combo that ended up not working out. All of the rest of the photos are of the build as it currently sits in my office.

  $4,554.92

  Ambrosias

  0

  0
• 

  The OnlineCarShow Special 😂🤷‍♂️ The OnlineCarShow Special 😂🤷‍♂️

  Play racing flight sim and fps games. Also host a YouTube channel. I go back and forth between this PC and a iMac for... Play racing flight sim and fps games. Also host a YouTube channel. I go back and forth between this PC and a iMac for editing and posting videos. It’s running a AMD r7 3700x I bought from y’all with a MSI x570 Pro Carbon board, 32gb 4400mhz thermaltake memory, Asus ROG Radeon 5700xt OC, msi 360r liquid cooler, cooler master case with extra exhaust fan I installed. 750w EVGA Gold psu. Ran to a Asus Tuff gaming 35” ultra wide 100hz. Using Razer Tournament edition keyboard and Razer Viper mouse. I also use a Razer Wolverine controller and Logitech x52 flight system for certain games. With the 5700xt it runs 1440 res very well games and smooth like butter. In future I’d like to upgrade the GPU (had to go with what I could find at the time) and maybe a good steering wheel pedals and shifter.

  $3,099.95

  OnlineCarShow S

  0

  0
• 

  My Daily Driver/Project PC My Daily Driver/Project PC

  First build was back in 2014ish? Had an AMD A10 7700K Black Edition with Asrock fatal1ty fm2a88x+ killer board, 8GB Crucial... First build was back in 2014ish? Had an AMD A10 7700K Black Edition with Asrock fatal1ty fm2a88x+ killer board, 8GB Crucial Ballistix RAM 1600Mhz, MSI R9 270 Twin Frozr 2GB, 128GB Samsung 840 PRO SSD and 1TB WDBlue HDD, EVGA 500W 80 Plus PSU, in a Corsair Carbide Spec01 lol. This is my complete overhaul (2.5 years-ish old now. Newest part is GPU, originally had an Asus RX580 4GB) Built this purposely for casual gaming at 1440p high/ultra, photo editing and minor video work.. Running 2 monitors ACER Nitro VG271U and MSi Optix MAG24C.. (Yeah cringey cause not matching monitors lol) Peripherals are Glorious Model D, Glorious TKL Keyboard with lubed and filmed Gateron Yellow switches, Glorious Extended mouse pad. For Audio I'm currently running FiiO E10K USB DAC/AMP to a Philips Fidelio X2HR open back headphones. Speakers are Logitech z623 system. Mic is a Fifine T669 with boom arm and shock mount. Aiming to upgrade to AIO cooling since I have the space.. Feel free to roast or suggest anything lol

  $1,992.79

  John N

  0

  0
• 

  Terror Storm v2 Terror Storm v2

  gaming, general purpose and personal build gaming, general purpose and personal build

  $1,244.96

  christo25

  0

  0
• 

  NZXT case build 1 and 2 NZXT case build 1 and 2

  PC 1 I mainly use general purpose and playing pc games.PC 2 I made for my spouse to work on and also play pc games with... PC 1 I mainly use general purpose and playing pc games. PC 2 I made for my spouse to work on and also play pc games with me. Most of the games I play are found on Steam, Blizzard, Epic Games, LoL, Valorant, etc. I'm a OIF/OEF Vet myself, my teenage kids wanted to get into PC gaming (they're "upgrading" from consoles/Fortnite) and I come from an automotive repair background so putting together a PC is trivial in comparison to an engine or fine tuning suspension for an auto cross track. Anywho, future upgrades to include the new 6800 XT or some 3080's were available but I'll deal with having 5700 XT's for now as a place holder. Almost returned both these NZXT cases (still within 30day window) and buy 2 new Lian Li O11 Dynamic Mini cases + 12*LL120 case fans but too lazy to take apart both PC components JUST to have the NEW case.

  $3,267.86

  Phong V

  0

  0
• 

  First Born Son First Born Son

  First ever PC build. I played on a gaming laptop for awhile but it was time to build something for myself and call it my... First ever PC build. I played on a gaming laptop for awhile but it was time to build something for myself and call it my own. I built it to be able to play with my friends who also built their own PCs. Also there was quite the incentive when I realized the greater performance you get on a PC when compared to a console, especially when playing cross-platform games. I play Call of Duty, Rainbow Six Siege, Overwatch, and Destiny 2 mainly. It definitely was a fun time putting it all together with the help of my roommates. I can definitely tell the difference from my Xbox One and my gaming laptop (which had a 1660ti in it). It runs very smooth and boots up super quick with the M.2 drive. At first I was a tad hesitant to get an AMD card because Nvidia is the top dog but so far, I've had no regrets as it has proven itself worthy for giving my the frames I want in games.

  $1,457.87

  Kyle C

  0

  0
• 

  Rainbow 🌈 Cityyyy Rainbow 🌈 Cityyyy

  This is actually my first build I've ever done. I am currently 2 months in and love it, I bought it for gaming and streaming... This is actually my first build I've ever done. I am currently 2 months in and love it, I bought it for gaming and streaming . I stream on twitch and Facebook. I love to play competitive gaming such as call of duty,fortnite and pubg. My PC SCREAMS rgb. From mobo to ram to fans to case it has it all. If your looking for characteristics and flows if endless color and a computer tbats future proof look no further and vote for me.

  $10,695.38

  Aaron E

  0

  0
• 

  Blue Knight Blue Knight

  Built the computer primarily for school with the intentions to be able to game on it as well. Built the computer primarily for school with the intentions to be able to game on it as well.

  $1,131.92

  Keith B

  0

  0