Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea, Powerspec Builder
This is an all metal hotend upgrade kit for MK10 style extruders. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, Qidi Tech, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, PowerSpec Ultra 3D Printer, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer
Vendor Warranty:
- Parts: 30 Day Limited
- Labor: 30 Day Limited
Micro Center Return Policy:
We guarantee your satisfaction on every product we sell with a full refund — and you won’t even need a receipt.* We want you to be satisfied with your Micro Center purchase. However, if you need help or need to return an item, we’re here for you!
If an item you have purchased from us is not working as expected, please visit one of our in-store Knowledge Experts for free help, where they can solve your problem or even exchange the item for a product that better suits your needs.
If you need to return an item, simply bring it back to any Micro Center store for a full refund or exchange.
*If you are a Micro Center Insider or if you have provided us with validated contact information (name, address, email address), you won’t even need your receipt.
Accelerate Your Returns with Micro Center's Online Return Check-in!
General Return Policy
Desktop / notebook computers, tablets, processors, motherboards, digital cameras, camcorders and projectors, 3D printers, 3D scanners, and CD/DVD duplicators
may be returned within 15 days of purchase. All other products may be returned within 30 days of purchase.
Merchandise must be in new condition, with original carton / UPC, and all packaging / accessories / materials.
If you need to return software, a game or a movie, remember that you may not retain any copies — it’s not legal, and it’s not nice.
Digital Downloads
All Digital Download sales are final and are not eligible for return or refund under the Micro Center Return Policy.
Using the software may require the use of a computer or other device that must meet minimum system requirements. It is recommended that you familiarize yourself with the system requirements before making your purchase. Software system requirements are typically found on the Product information specification page.
Aerial Drones
Micro Center is happy to honor its customary 30-day return policy for Aerial Drone returns due to product defect or customer dissatisfaction.
Unfortunately, we cannot accept returns with damage due to pilot error. So let’s be careful out there!
As of December 21, 2015 all drones, regardless of purchase date, between 0.55 lb (8.82 oz, 250 g, 0.25 kg) and 55 lb take-off weight are required by the FAA to be registered for outdoor use. Details regarding registration can be found at: https://www.faa.gov/uas/getting_started/
Wireless Phones & Devices
Wireless Phones are not eligible for return. (COVID-19 Safety Measure)
Micro Center Support:
Walk-in Tech Support
As a service to our customers, Micro Center offers in-store technical support. Stop in any of our store locations during regular business hours, and our expert staff will answer your computer questions or help you with things like:
- Hardware troubleshooting
- Wireless and wired networking
- Software configuration
- Upgrades
- Tips and tricks
Support for Micro Center purchases
If you need help with products purchased from Micro Center, please contact one of our knowledgeable tech support reps using the online chat button below, or visit our Tech Support page for additional options and helpful information.
Chat with Tech Support
Tech Support Hours
- Monday - Friday 9 am to 12 midnight
- Saturday 10 am to 12 midnight
- Sunday 11 am to 9 pm
- Eastern Time
- * excluding posted holiday hours
Free assistance is available for the first 60 days on new purchases, excluding internal hardware installations or networking support. Your invoice reference number will be required for free assistance.
Ask your Support Technician about additional options available through our exclusive Priority Care Program.
Tech Support accepts the following credit cards: VISA; MasterCard; Discover; American Express
Support Resources
Vendor Warranty:
- Parts: 30 Day Limited
- Labor: 30 Day Limited
Micro Center Community
Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea, Powerspec Builder
2 NEW IN STOCK at St. Davids Store