101 Basics Starter Kit

Usually ships in 1-3 business days.

Specifications

The OSEPP 101 Basic Starter Kit has all you need to get up and running.


Product Information
SKU014852
Mfr Part#ARD-01
UPC899262000367
Boards/Projects
Board Type Arduino Uno Compatible
Components Starter Kits
Mainboards
Board Color Multicolor
Processor ATmega328P Microcontroller
Clock Rate 16MHz
Input Voltage 6V - 12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6 Pins
SDRAM 2KB
EEPROM 1KB
LED Indicators RX
TX
Power
What is in the Box
What's in the Box OSEPP UNO R3 Plus, 6 feet USB type A to mini-B, 2 x Tact push switch 6mm x 6mm through hole, DIP switch 4 position through hole, 1K ohm potentiometer (variable resistor) long pins, 10K ohm potentiometer (variable resistor) long pins, 20 x 330 ohm axial resistor, 1/2W 5%, 5 x 1k ohm axial resistor, 1/2W 5%, 5 x 10k ohm axial resistor, 1/2W, 5%, 2 x LED through hole Red, 8.7mm height, ~2V drop, ~10-20mA, LED through hole Yellow, 8.7mm height, ~2V drop, ~10-20mA, 2 x LED through hole Green, 8.7mm height, ~2V drop, ~10-20mA, 2 x LED through hole White, 8.7mm height, ~2V drop, ~10-20mA, 2 x LED through hole Blue, 8.7mm height, ~2V drop, ~10-20mA, 2 x Two digits 7-segment LED RED, Buzzer, 5Vo-p, 2 x NPN transistor, Breadboard 30 columns x 14 rows (include 2 VCC and 2 GND), 10 x 6 inches male-to-male jumper wires (red), 10 x 6 inches male-to-male jumper wires (black), 10 x 6 inches male-to-male jumper wires (white), 10 x 6 inches male-to-male jumper wires (grey), 10 x 6 inches male-to-male jumper wires (blue), 4 x AA battery enclosure with DC power jack and ON/OFF switch, 2 x 2cm x 2cm x 3mm thick double side tape, Information sheet UNO diagram + basic electronic theory, Kit container

Reviews

Questions and Answers